522887
38
Zoom out
Zoom in
Previous page
1/119
Next page

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Specifications
b If the access points are not detected automatically, use the i
button to select the “Manual” and press the ENTER button.
Setting becomes manual. For details, see “Manual settings”
(vpage 35).
b If the access points are repeat search, use the i button to select
the “Search” and press the ENTER button.
e If there is an encryption setting for the access point you selected
in step w, enter same encryption key as used for the access
point. (If there is no encryption setting, proceed to step t.
1
Fitting a rod antenna (vpage 21).
b If a LAN cable is connected, remove it.
2
Turn on the AVR-4308 (vpage 51).
3
Set the access point at the GUI menu “Manual Setup”
– “Network Setup” – “Network Setup”.
When searching access points to connect automatically, refer to
“Automatic settings”.
When searching access points to connect manually, refer to
“Manual settings”.
n Automatic settings
q Select “Search” and press the ENTER button.
The access point you have set is displayed.
w
Use the ui button to select the access point, and then press
the ENTER button.
Select when searching
access points again.
Wireless LAN settings
Use this procedure to configure the Wireless LAN settings.
w Select the access point.
Example) DENON
Select when access
points cannot be searched
automatically.
q Select “Search”.
r Set only during
“WEP” in step w.
t Select “Connection”.
e Enter
encryption key.
Use the uio p button to input the “Key” (encryption key) and
press the ENTER button.
Enter the same encryption key as used for the access point.
[Characters that can be input]
A ~ Z
a ~ z
0 ~ 9
! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
When no security settings have been used in the Internet
connection settings, this step is not necessary.
r
When encryption is by “WEP”, select the “Default Key” using
the i button, and then press the o p button.
[Selectable items]
1
2
3
4
Select the same default key as used for the access point. This
should normally be set to “1”.
t
Use the i button to select “Connection” and press the ENTER
button.
Network connection starts.
When connection is established with the access point,
“Connection completed.” is displayed.
AVR-4308 performs automatic network setup due to the DHCP
function.
When connecting to a network that has no DHCP function,
perform the setting in step 4.
Setup
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-4308A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-4308A in the language / languages: English as an attachment in your email.

The manual is 14,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info