64195
44
Zoom out
Zoom in
Previous page
1/146
Next page
39
Basic Operation Basic Operation
ENGLISH
ENGLISH
Channel level
You can adjust the channel level either according to the playback
sources or to suit your tastes, as described below.
1
Press the ENTER button.
The “Channel Vol.” screen is displayed.
2
Channels which is not used are not displayed.
Press the CURSOR
DD
,
HH
or ENTER button to
select the speaker.
The channel switches as shown below each time the ENTER
button is pressed.
3
Press the CURSOR
FF
or
GG
button to adjust the
level.
The adjustment range for the different channels is +12 dB
to –12 dB in step of 0.5 dB.
The sound from the subwoofer can be completely cut by
lowering the SW (subwoofer) setting one additional from
–12 dB (setting it to “OFF”).
FADER
SR
SBL
SL
SBR
FL
C
FR
SW
Fader function
This function makes it possible to lower the volume of the front
channels (FL, C and FR) or the rear channels (SL, SR, SBL and
SBR) together. Use it for example to adjust the balance of the
sound from each position when multi-channel music sources are
played.
1
Press the ENTER button.
The “Channel Vol.” screen is displayed.
2
Press the CURSOR
DD
,
HH
or ENTER button, then
select “Fader”.
The channel switches in the order shown below each time
the ENTER button is pressed.
FADER
SR
SBL
SL
SBR
FL
C
FR
SW
When the surround back speaker setting is set to “1spkr” for
“Speaker Configuration” ( page 82), this is set to “SB”.
The channel whose channel level is adjusted lowest can be
faded to –12 dB using the fader function.
If the channel levels are adjusted separately after adjusting the
fader, the fader adjustment values are cleared, so adjust the
fader again.
3
Press the CURSOR
FF
button to reduce the
volume of the front channels, the CURSOR
GG
button to reduce the volume of the rear channels.
Example: When “FRONT” is selected
The fader function does not affect the subwoofer channel
CURSOR
CH SEL/ENTER
CH SEL/ENTER
CURSOR
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-4306 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-4306 in the language / languages: English as an attachment in your email.

The manual is 11,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-4306

Denon AVR-4306 User Manual - German - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info