Compressed audio formats such as MP3, WMA (Windows Media
Audio) and MPEG-4 AAC reduce the amount of data by eliminating
signal components that are hard for the human ear to hear. The
RESTORER function generates the signals eliminated upon
compression, restoring the sound to conditions near those of the
original sound before compression. It also corrects the sense of
volume of the bass to obtain richer sound with compressed audio
signals.
Press RESTORER to select “ON” or
“OFF”.
RESTORER: ON
ON : Use RESTORER.
OFF : Do not use RESTORER.
• This item can be set with analog signals or when a PCM signal (fs =
44.1/48 kHz) is input.
• This cannot be set when the surround mode is set to “DIRECT”.
• This item default setting for “iPod” is “ON”. All others are set to
“OFF”.
• When set to “ON”, is displayed.
Audio Delay
Default settings are underlined.
While viewing video, manually adjust the time to delay audio output.
1
Press AUDIO DELAY.
A.Delay :• 0ms–
2
Use op to select the value to be
set and then press ENTER to enter
the setting.
0ms – 200ms
Store “Audio Delay” for each input source.
NIGHT MODE
Default settings are underlined.
Optimized setting for late-night listening.
Press NIGHT to select your desired
mode.
D.Comp : OFF
OFF : Not set.
Low : Set the adjusted value to “Low”.
Mid : Set the adjusted value to “Middle”
High : Set the adjusted value to “High”.
When a Dolby TrueHD signal is output, “DRC” is displayed on the
display of the main unit.
The setting mode is also changed as shown below.
• OFF : Not set.
• Low : Set the adjusted value to “Low”.
• Mid : Set the adjusted value to “Middle”
• High : Set the adjusted value to “High”.
• Auto : Automatic dynamic range compression on/off control
according to the source.
Adjusting the sound fi eld effects
• If no button is operated for about 5 seconds, the display is returned to the normal display. After registering, the display is returned to the normal display.
Tone
Default settings are underlined.
Adjust the tonal quality of the sound.
1
Press TONE.
ToneControl•OFF–
2
Use op to select “ON”.
ON : Allow tone adjustment (bass, treble).
OFF : Playback without tone adjustment.
NOTE
The tone cannot be adjusted in the direct
mode.
3
Press TONE to select an item to be set, and use op
to select a setting value.
Bass : Adjust low frequency range (bass).
• –6dB – +6dB (0dB)
Treble : Adjust high frequency range (treble).
• –6dB – +6dB (0dB)
“Bass” or “Treble” can be set when “Tone Control” is set to
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Denon AVR-391 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Denon AVR-391 in the language / languages: English as an attachment in your email.
The manual is 2,11 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
