498715
22
Zoom out
Zoom in
Previous page
1/39
Next page

Erste Schritte Anschlüsse Fehlersuche Technische DatenWiedergabe Informationen
DEUTSCH
q Drücken Sie nach Durchführung der Schritte 1 ~ 3 unter “Ändern
des aktuellen Kanalpegels” auf Seite 18 die MEMORY/ENTER.
Die “1” in der Anzeige “REFERENCE 1” blinkt.
w Drücken Sie o p bis zum gewünschten Preset-Speicher, und
drücken Sie anschließend auf MEMORY/ENTER.
b Nach dem Drücken von o p wird “REFERENCE 1” oder
“REFERENCE 2” ausgewählt.
b Die geänderten Kanalpegel sind jetzt im gewählten Speicher
hinterlegt.
Channel Level Setup (Kanalpegel einstellen)
HINWEIS
Lautsprecher, die in der “Speaker Conguration” auf “N” gestellt
wurden, werden nicht angezeigt.
Hier können Sie den Kanalpegel so einstellen, dass das Signal aus
allen Lautsprechern gleich laut ist.
q Wählen Sie mit ui den gewünschten Kanal aus.
Der Lautsprecher, für den die Einstellung vorgenommen werden
kann, schaltet jedes Mal, wenn die Taste gedrückt wird, um.
FL C FR
SR
MODE:REF1
SL SW DD DTS
[Display]
Ändern des aktuellen Kanalpegels
Die gegenwärtigen Kanalpegel können Sie wie gewünscht
ändern. Die eingestellten Werte werden im Nutzspeicher
abgelegt (“REFERENCE 1”).
Nach dem Einstellen jedes Kanalpegels anhand des Prüftons
können Sie die Kanalpegel entweder abhängig von der
programmierten Quelle oder individuell nach eigenem Geschmack
einstellen. (Einzelheiten dazu, siehe unter Jeden Kanalpegel mit
einem Prüfton einstellen” auf Seite 28.)
Eingestellte Kanalpegel speichern
Die eingestellten Kanalpegel können Sie im Preset-Speicher
(“REFERENCE 1”, “REFERENCE 2”) ablegen und bei Bedarf wieder
abrufen.
Tasten, die am Gerät und auf der Fernbedienung vorhanden
sind
TASTE
Nur am Gerät vorhandene Tasten
<TASTE>
Nur auf der Fernbedienung vorhandene Tasten [TASTE]
Zur Darstellung von Tasten in dieser Anleitung
benutzte Zeichen
d
f
MEMORY/ENTER
[CH SELECT]
uiop
MEMORY/ENTER
op ui
Kanalpegel einstellen
Dient zur Auswahl eines gespeicherten Kanalpegels.
q Drücken Sie [CH SELECT].
w Drücken Sie o p um den Modus auszuwählen (“REFERENCE 1”
oder “REFERENCE 2”).
e Drücken Sie nach Auswahl des Modus erneut die
[CH SELECT].
Das Gerät kehrt wieder zur normalen Anzeige zurück.
w Drücken Sie
o p, um den Pegel des gewählten Kanals zu
ändern oder den LFE der programmierten Quelle nach Wunsch
einzustellen.
[Wertebereich]
Anderer Pegel :
–15dB
~
0dB
~
+15dB
LFE Pegel :
–10dB
~
0dB
b Prinzipiell ist ein LFE Pegel von 0 dB empfehlenswert.
(Der empfohlene LFE Pegel bei bestimmten älteren DTS
Softwareversionen beträgt jedoch −10 dB.) Wenn der
empfohlene Pegel zu hoch erscheint, senken Sie ihn soweit
notwendig.
e Wiederholen Sie die obigen Schritte 1 und 2, um jeden Kanalpegel
einzustellen.
Einrichtung
Einzelheiten über die Auswahl, Einstellung und Aufhebung von Einstellungen in den einzelnen Menüs nden Sie unter “Menübedienung” (vSeite 15).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-390 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-390 in the language / languages: German as an attachment in your email.

The manual is 4,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info