584190
42
Zoom out
Zoom in
Previous page
1/96
Next page
LFE
Adjust the low-frequency effects level (LFE).
[Variable range]
–10dB
~
0dB
CENTER IMAGE
Assign center channel signal to front left and right channels for wider
sound.
[Variable range]
0.0
~
0.3
~
1.0
PANORAMA
Assign front L/R signal also to surround channels, for wider sound.
If the surround effect seems weak, set “PANORAMA” to “ON”.
[Selectable items]
ON
OFF
For proper playback of the different program sources, we recommend
setting to the values below.
Dolby Digital sources: “0 dB”
DTS movie sources: “0 dB”
DTS music sources: “-10 dB”
EFFECT
Switch effect signal for multi-surround speakers on and off.
When “EFFECT” is set to ON”, a surround effect with a strong sense
of expansion is achieved.
[Selectable items]
ON
OFF
DIMENSION
Shift sound image center to front or rear, to adjust playback balance.
[Variable range]
0
~
3
~
6
DELAY TIME
Adjust delay time to control sound stage size.
[Variable range]
0 ms
~
30 ms
~
300 ms
CENTER WIDTH
Assign center channel signal to front left and right channels for wider
sound.
[Variable range]
0
~
3
~
7
LEVEL
Adjust effect signal level.
[Variable range]
1
~
10
~
15
Set to a lower level if the positioning and sense of phase of the
surround signals seems unnatural.
ROOM SIZE
Determine size of acoustic environment.
[Selectable items]
small
: Simulate acoustics of a small room.
med. s
medium
med. l
large
: Simulate acoustics of a large room.
NOTE
“ROOM SIZE” does not indicate the size of the room in which sources
are played.
Some Dolby Digital EX sources do not include EX flags. If the playback
mode does not switch automatically even when AFDM” is set to
ON”, set “SB CH OUT” to “MTRX ON” or “PLIIx CINEMA.
AFDM (Auto Flag Detect Mode)
Auto-select surround mode by source.
This function only works for software containing a special identification
signal.
If the software being played is recorded in Dolby Digital EX or DTS-ES,
it is played in 6.1-channels. If not, it is played in 5.1-channels.
[Selectable items]
ON
OFF
Example : Playing Dolby Digital software (with EX flag)
When AFDM” is set to ON”, the surround mode is automatically
set to the DOLBY + PLgx CINEMA mode.
To play in the Dolby Digital EX mode, set AFDM” to OFF” and “SB
CH OUT” to “MTRX ON”.
SB CH OUT (for Multi-channel sources)
Select playback mode for surround back channels.
[Selectable items]
OFF
: No signal is played from the surround back
channels.
NON MTRX
: The same signals as those of the surround
channels are output from the surround back
channels.
MTRX ON
: The surround channel signals undergo digital
matrix processing and are output from the
surround back channels.
PL
II
x CINEMA
z1
: Decoded in Dolby Pro Logic IIx Cinema mode,
surround back signal played.
PL
II
x MUSIC
z2
: Decoded in Dolby Pro Logic IIx Music mode,
surround back signal played.
ES MTRX
z3
: DTS signal played with digital matrix processing.
ES DSCRT
z4
: Signal included in DTS-ES Discrete 6.1-channel
sources played.
z1: This can be selected when “Surround Back” is set to “2spkrs”
at the menu “Manual Setup” “Speaker Setup” “Speaker
Configuration” setting (vpage 26).
z2: This can be selected when “Surround Back” is set to “2spkrs”
or “1spkr” at the menu “Manual Setup” “Speaker Setup”
“Speaker Configuration” setting.
z3: This can be selected when playing DTS sources.
z4: This can be selected when playing DTS sources including a
discrete 6.1-channel signal identification signal.

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
AVR2808CIEU.indd 42 2007/06/20 8:58:14
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-2808CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-2808CI in the language / languages: English as an attachment in your email.

The manual is 12,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-2808CI

Denon AVR-2808CI User Manual - English - 93 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info