584190
32
Zoom out
Zoom in
Previous page
1/96
Next page
Subwoofer Mode
Select low range signal to be reproduced by subwoofer.
[Selectable items]
LFE
LFE+Main
: Select subwoofer signal.
Crossover
Select crossover frequency from which subwoofer handles low range
signal.
[Selectable items]
40Hz
60Hz
80Hz
90Hz
100Hz
110Hz
120Hz
150Hz
200Hz
250Hz
: Select crossover frequency.
Distance FL
Set distance from listening position to front left speaker.
[Variable range]
0.0ft ~ 60.0ft
/
0.00m ~ 18.00m
Distance FR
Set distance from listening position to front right speaker.
[Variable range]
0.0ft ~ 60.0ft
/
0.00m ~ 18.00m
d
Dolby Digital Setup
Set dynamic range for downmix playback of Dolby Digital
sources.
Set this to “ON” if the sound from the front speakers seems
distorted.
When not using the center speaker or surround speakers, the
playback sound is down-mixed and output from the front speakers.
[Selectable items]
ON
: Compression is used. Select this if sound from front
speakers is distorted.
OFF
: Do not use compression. This is the recommended setting.
f
Auto Surround Mode
Make setting for memorizing surround mode setting for each input
signal type.
The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals
listed below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r Multi-channel signals other than Dolby Digital and DTS (PCM,
DSD, etc.)
When playing in the PURE DIRECT mode, the surround mode does
not change even if the input signal is changed.
[Selectable items]
ON
: Memorize settings. Most recently stored surround mode is
automatically selected.
OFF
: Do not memorize settings. Surround mode does not change
according to input signal.
Front
Select front speaker size.
[Selectable items]
Large
Small
: Select front speaker size.
Subwoofer
Select subwoofer use.
[Selectable items]
Yes
No
: Select subwoofer use.
g
Manual EQ
Adjust tonal quality for each speaker using graphic equalizer.
Base Curve Copy
Copy the ROOM EQ´s “Flat” correction curve and adjust manually.
[Selectable items]
Yes
: Adjust manually.
No
: Do not adjust manually.
“Base Curve Copy” is displayed after the auto setup procedure has
been performed.
Adjust CH
Select speaker adjustment method.
[Selectable items]
Each CH
: Adjust tonal quality for each speaker separately.
L/R CH
: Adjust tonal quality for each L/R speaker pair.
ALL CH
: Adjust tonal quality for all speakers together.
Default
Resets the settings to the default values.
Manual EQ
Select the speaker and frequency band and adjust the level.
[Selectable items]
63Hz
125Hz
250Hz
500Hz
1kHz
2kHz
4kHz
8kHz
16kHz
[Variable range]
–20dB ~ +6dB

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
AVR2808CIEU.indd 32 2007/06/20 8:58:05
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-2808CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-2808CI in the language / languages: English as an attachment in your email.

The manual is 12,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-2808CI

Denon AVR-2808CI User Manual - English - 93 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info