38
Advanced Operation
ENGLISH
ENGLISH
Advanced Operation
The night mode can be set when playing Dolby Digital sources.
The dialogues are easier to hear at night and when listening with
the volume low.
Press NIGHT.
• The “NIGHT” indicator lights.
Night mode
• Canceling night mode:
Press NIGHT again.
• When the night mode is set to “ON”, the “D.COMP” surround
parameter can not be selected.
2 Calling the settings out
Press USER MODE at which the settings you want to
call out are stored.
• The selected user mode display lights.
User mode function
The AVR-2807 is equipped with a function for storing the
selected input source, the auto surround mode and input mode
in the memory and selecting these settings when you want to
use them.
The following are stored in the memory:
qq
Currently set input source
ww
Currently set surround mode
ee
Currently set input mode
2 Storing the settings in the memory
Press and hold USER MODE.
Press and hold in until the selected user mode indicator
lights.
1
2
Press
<
VIDEO SELECT
>
, turn
<
FUNCTION
>
until the
desired image appears on the display.
Combining the currently playing sound with
the desired image (VIDEO SELECT function)
•To cancel, press
<
VIDEO SELECT
>
and turn
<
FUNCTION
>
to select
“SOURCE”.
• The video source selected with the video select function is
stored in the memory for the different input sources.
• It is not possible to select HDMI input signals.
• When playing HDMI video input signals, the analog video signal
of another function cannot be selected for the HDMI video
output.
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
The surround mode last selected and the input mode setting are
stored individually for the different input sources.
The surround parameters, tone control settings and playback
level balance for the different output channels are memorized
for each surround mode.
Personal memory plus function
