584055
58
Zoom out
Zoom in
Previous page
1/78
Next page

ENGLISH
Getting Started Connections Remote Control Information Troubleshooting SpecificationsMulti-ZoneSettings
1Press .
2Press ui to select the speaker.
The speaker that can be set switches each
time one of the buttons is pressed.
3Press o p to adjust the volume.
b In the case of a subwoofer, reducingthe volume when it is at
“–12 dB” will change the setting to “OFF” (none).
CHANNEL LEVEL
Bd0.0LtnorF
Bd0.0retneC
Bd0.0RtnorF
Bd0.0refoowbuS
Bd0.0RdnuorruS
Bd0.0RkcaB.S
Bd0.0LkcaB.S
Bd0.0LdnuorruS
raeRtnorFredaF
Select
1Use or i to select “Fader”, then select the item
to be adjusting using o or p.
2Press o p to adjust the volume of the speakers.
The fader function does not affect the subwoofer.
The fader can be adjusted until the volume of the speaker adjusted
to the lowest value is –12 dB.
1 Set the items below to the settings you want to save.
q Input source (vpage 42)
w Input Mode (vpage 39)
e Surround Mode (vpage 46)
r Audyssey Settings (MultEQ, Dynamic EQ, Dynamic
Volume) (vpage 50)
t Front Speaker Setup (vpage 30)
y Volume setting (vpage 42)
u Video select (vpage 38)
2 Press and hold the desired until “Memory”
appears on the display.
The current settings will be memorized.
NOTE
Input sources stored with the quick select function cannot be selected
if they have been deleted at menu “Source Delete(vpage 33). In
this case, store them again.
Adjust the Volume of the
Different Speakers
You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
Saving Frequently Used Settings
(Quick Select Function)
This function allows you to save all the settings shown in step
1. When frequently used settings are saved, they can easily be
set again the next time you want to use them. This function also
allows you to always enjoy the same playback environment.
Three sets of settings can be saved.
Saving the settings
Press the at which the
settings you want to call out are saved.
Calling the settings out
This function lets you adjust (fade) the sound from all the front (Front
speaker / center speaker / Front Height speaker) or rear (Surround speaker /
Surround Back speaker) speakers at once.
If headphones are plugged in, the headphones settings screen
appears.
GQuick Select DefaultsH
Input Source Volume
Quick Select 1 DVD –40 dB
Quick Select 2 SAT/CBL –40 dB
Quick Select 3 VCR/iPod –40 dB
n Naming Quick Select settings
“Quick Select Name” (vpage 34).
Various Memory Functions
Adjust the volume of the different speakers
Adjusting the volume of groups of speakers
(Fader Function)
Personal Memory Plus Function
This function sets the settings (input mode, surround mode, MultEQ,
Dynamic EQ, Dynamic Volume, audio delay etc.) last selected for the
individual input sources.
Last Function Memory
This stores the settings as they were directly before the standby mode
was set.
When the power is turned back on, the settings are restored to as they
were directly before the standby mode was set.
Backup Memory
The various settings are backed up for about 1 week, even if the power
is turned off or the power cord is disconnected.
Saving the settings
It is also possible to save three settings for ZONE2.
1Set the remote control unit’s
device selector switches as
shown on right.
2Perform steps 1 and 2 under “MAIN ZONE
settings”.
MAIN ZONE settings
ZONE2 settings
Front
Front
Front
Playback
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-2310CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-2310CI in the language / languages: English as an attachment in your email.

The manual is 15,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-2310CI

Denon AVR-2310CI Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info