480648
39
Zoom out
Zoom in
Previous page
1/80
Next page

Getting Started
Connections Playback Remote Control Information Troubleshooting
Specifications
ENGLISH
Multi-Zone
Setting items Setting contents
Input Assign(HDMI)
Assign input sources to input
connectors.
HDMI
:
The
DVD
HDP
TV
SAT/CBL
VCR
DVR
V.AUX
input
sources are assigned to the HDMI input terminals as shown below.
HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5
None : Do not assign an HDMI input terminal to the currently selected
input source.
bUpon purchase, the settings of the different input sources are as shown
below.
Input
source
DVD HDP TV SAT/CBL VCR DVR V.AUX
Default
setting
HDMI1 HDMI2 None HDMI3 None HDMI4 HDMI5
When HDMI is assigned to an input source, the audio signal switches
to HDMI along with the video signal. To use with the digital audio
input connectors assigned, set menu “Input Mode(vpage 37) to
“Digital”.
When the AVR-2310 and TV are connected with an HDMI cable, if the
TV is not compatible with HDMI audio signal playback, only the video
signals are output to the monitor.
The audio signals input from the analog, digital and EXT. IN connectors
are not output to the TV.
NOTE
When “HDMI Control” is set to “ON”, HDMI cannot be assigned to “TV”
at the “HDMI” settings (vpage 30).
Making the input settings (Input Setup)
Setting items Setting contents
Input Assign(Digital)
Assign input sources to input
connectors.
Digital : The
DVD
HDP
TV
SAT/CBL
VCR
DVR
V.AUX
CD
input sources are assigned to the digital audio input terminals as shown
below.
Coax1 / Coax2 / Opt1 / Opt2 / Opt3
None Do not assign a digital input terminal to the currently selected
input source.
bUpon purchase, the settings of the different input sources are as shown
below.
Input source
DVD HDP TV SAT/CBL VCR
Default setting Coax1 None Opt1 Coax2 None
Input source
DVR V.AUX CD
Default setting Opt2 Opt3 None
Input Assign(Component)
Assign input sources to input
connectors.
Component : The
DVD
HDP
TV
SAT/CBL
VCR
DVR
V.AUX
input sources are assigned to the component video input terminals as
shown below.
1-RCA (Component video 1 input terminal) / 2-RCA (Component video
2 input terminal)
None
: Do not assign the component video input terminals to the currently
selected input source.
bUpon purchase, the settings of the different input sources are as shown
below.
Input
source
DVD HDP TV SAT/CBL VCR DVR V.AUX
Default
setting
1-RCA None None None None 2-RCA None
iPod Dock
Change the input source to
which the control dock for
iPod is assigned.
The control dock for iPod can be assigned to the
DVD
SAT/CBL
VCR
DVR
V.AUX
CD
input sources.
Assign
: Assign the currently selected input source to the Control Dock for
iPod input.
None
: Do not assign the currently selected input source to the Control Dock
for iPod input.
With the default settings, the control dock for iPod can be used
connected to the VCR (iPod) connector.
Even if “iPod Dock” is set to “Input Assign, if AVR-2310 and control
dock for iPod are not connected, the input is used as the normal input
source.
Changing the Input Sources Assigned to the
Input Terminals (Input Assign)
Default settings are underlined.
: Moves the cursor (Up/Down/Left/Right)
: Decision the setting
: Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Settings
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-2310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-2310 in the language / languages: English as an attachment in your email.

The manual is 14,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-2310

Denon AVR-2310 User Manual - German - 80 pages

Denon AVR-2310 User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info