Speaker Setup
Use this procedure to set the speakers manually or if you wish to
change the settings made with the auto setup procedure.
a
Speaker Confi guration
Select speaker confi guration and size.
(bass reproduction capability)
Front Speaker
Select front speaker size.
[Selectable items] Large Small
Subwoofer
Select subwoofer use.
[Selectable items] Yes No
Center Speaker
Select center speaker use and size.
[Selectable items] Large Small None
For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 17).
• Select “Large” or “Small” not according to the physical size of the
speaker but according to the low frequency reproduction capabilities
based on the frequency set at “Crossover Frequency” (vpage 25).
• When “Front Speaker” is set to “Small”, “Subwoofer” can
automatically set to “Yes”.
• If “Subwoofer” is set to “No”, “Front Speaker” is automatically set
to “Large”.
• If “Surround Speaker” is set to “None”, “Surround Back Speaker”
are automatically set to “None”.
• When “Front Speaker” is set to “Small”, “Center Speaker” can not
be set to “Large”.
• When using just one surround back speaker, connect it to the left
channel (SBL).
• When set to other than “7.1ch” with “Amp Assign”, “Surround Back
Speaker” is not displayed.
Large : Select this when using large speakers with ample low
frequency reproduction capabilities.
Small : Select this when using small speakers without ample low
frequency reproduction capabilities.
None : Select this when no speaker is connected.
Yes : Select this when a subwoofer is connected.
No : Select this when no subwoofer is connected.
2spkrs 1spkr :
Select the number of surround back speakers.
Surround Back Speaker
Select surround back speaker use and size.
[Selectable items] (Large Small None )
(2spkrs 1spkr )
NOTE
Since “Amp Assign” of AVR-2309CI is set to “ZONE2” by default,
audio is not output from the surround back speakers. When using the
surround back speakers with MAIN ZONE, change the “Amp Assign”
setting to “7.1ch” (vpage 29).
Surround Speaker
Select surround speakers use and size.
[Selectable items] Large Small None
Setup
Even when the surround back speaker setting is other than
“None”, sound may not be emitted from the surround back
speaker, depending on the playback source. In this case,
make a menu “Parameter” – “Surround Parameter” – “SB
CH Out” setting other than “OFF” (vpage 41).