584054
19
Zoom out
Zoom in
Previous page
1/82
Next page

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
Specifications
External Controller
When using in combination with an RF Remote Controller (RC-
7000CI, sold separately) or RF Remote Receiver (RC-7001RCI, sold
separately) two-way communication with an RF Remote Controller
is possible.
The AVR-2309CI’s status information as well as iPod can be browsed
watching the RF Remote Controller’s display. For details, refer to the
operating instructions of the respective devices.
When used in combination with an RF Remote Controller or RF
Remote Receiver, make the settings at menu “Manual Setup”
– “Option Setup” – “232C Port” – “2Way Remote” (vpage 30).
On the menu, when setting “Manual Setup” “Option Setup”
“232C Port” to “2Way Remote”, you cannot use the RS-232C port
as an external controller (vpage 30).
RS-232C connector
This connector is used for an external
controller.
b If you wish to control the AVR-2309CI from
an external controller using the RS-232C
connector, perform the operation below
beforehand.
q Turn on the AVR-2309CI’s power.
w Turn off the AVR-2309CI’s power from the
external controller.
e Check that the AVR-2309CI is in the standby
mode.
Trigger output jack
The power of an external device equipped with a trigger input jack
can be turned on and off in association with operations on the AVR-
2309CI. For details, see menu “Manual Setup” “Option Setup”
– “Trigger Out” (vpage 30).
Output: DC 12 V 150 mA MAX.
Check the trigger input conditions of the connected device.
Connections
Multi-zone
ZONE2 out Connections
If another pre-main (integrated) amplifier is connected, the ZONE2 out
connectors can be used to play a different program source in ZONE2
at the same time (vpage 61 ~ 63).
R
L
R
L
"6%*0
3-
*/
"6%*0
"69
065
Pre-main amplier
(ZONE2)
Input Output
Infrared
retransmitter
Infrared
sensor
Extension jack for future use.
(Connect devices corresponding
with room to room function to
this jack. )
NOTE
For the audio output, use high quality pin-plug cords so that no
induction humming or noise is produced.
For instructions on installing and operating separately sold devices,
refer to the respective devices’ operating instructions.
To conduct multi-zone playback, see “Amp Assign / Multi-zone
Connections and Operations” (vpage 61 ~ 63).
NOTE
Insert the AC plugs securely. Incomplete connections could cause
noise.
Only use the AC outlets to plug in audio equipment. Do not use
them as power supplies for hairdryers or anything other than audio
equipment.
Wait until all connections have been completed before connecting the
power cord.
To household
power outlet
(AC 120 V, 60 Hz)
Power cord
(supplied)
Connection to the AC outlets
These outlets supply power to external audio
equipment.
The power supplied from these outlets turns
on and off together with the set’s power
switch.
Audio equipment with a total power
consumption of 120 W (1 A) can be
connected.
Connecting the Power Cord
Turning the Power On (vpage 47)
Once Connections are
Completed
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-2309CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-2309CI in the language / languages: English as an attachment in your email.

The manual is 9,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-2309CI

Denon AVR-2309CI Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info