62812
76
Zoom out
Zoom in
Previous page
1/81
Next page
Symptom Cause Countermeasure Page
No sound is
produced from
subwoofer.
Subwoofer’s power not turned
on.
The “Subwoofer” setting at
“Speaker Configuration” is set
to “No”.
The subwoofer is not properly
connected.
The subwoofer’s volume is
turned off.
Turn on the subwoofer’s power.
Set to “Yes”.
Check the connections.
Adjust the subwoofer’s volume
to an appropriate level.
24
10
54
No test tones are
produced when
remote control
unit’s TEST
button is pressed.
Surround mode not set to
“STANDARD” (Dolby/DTS
Surround).
Set to the “STANDARD” (Dolby/
DTS Surround) mode.
37
DTS sound is not
output.
Blu-ray Disc player / DVD player’s
audio output setting is not set to
bitstream.
Blu-ray Disc player / DVD player
is not compatible with DTS
sound playback.
The AVR-2309’s “Decode Mode”
setting is set to “PCM”.
Set the Blu-ray Disc player / DVD
player. For details, refer to the
Blu-ray Disc player / DVD player’s
operating instructions.
Use a DTS-compatible player.
Set to the “Auto” or “DTS”
mode.
34
HDMI audio
signals are not
output from
speakers.
The “Manual Setup” – “HDMI
Setup” “HDMI Audio Out”
setting is set to “TV”.
Set to “AMP”. 26
No sound is
output from
the monitor
connected
with HDMI
connections.
The “Manual Setup” – “HDMI
Setup” “HDMI Audio Out”
setting is set to “AMP”.
Set to “TV”. 26
Dolby TrueHD,
DTS-HD, Dolby
Digital Plus audio
is not output.
HDMI is not connected.
Blu-ray Disc player’s audio output
setting is not set to bitstream.
Blu-ray Disc player is not
compatible with DTS sound
playback.
Connect the HDMI.
Set the Blu-ray Disc player. For
details, refer to the Blu-ray Disc
player’s operating instructions.
Use a DTS-compatible player.
11, 12
Symptom Cause Countermeasure Page
No sound is
produced from
center speaker.
You are playing a monaural
source (TV, AM radio broadcast,
etc.) in the “STANDARD” (Dolby/
DTS Surround) mode.
The mode is set to something
other than “STANDARD” (Dolby/
DTS Surround).
37
No sound
is produced
from surround
speakers.
The surround mode is set to
“STEREO”, “DIRECT” or “PURE
DIRECT”.
Set to a surround playback
mode.
37, 38
No sound is
produced from
surround back
speaker.
The surround back speaker’s
power amplifier is assigned to a
different channel.
Surround back speaker setting is
set to “None”.
The “Parameter” “Surround
Parameter” “SB CH Out”
settings are “OFF”.
Surround mode not set to a mode
for 6.1- or 7.1-channel playback.
Check the setting and change it
as necessary.
Set to something other than
“None”.
Please set “Parameter”
“Surround Parameter” “SB
CH Out” to settings other than
“OFF”.
Select a surround playback
mode.
30
24
40, 41
36 ~ 38
GAudioH
Symptom Cause Countermeasure Page
Set does not work
properly when
remote control
unit operated.
Batteries are worn.
You are operating outside of the
specified range.
Obstacle between main unit and
remote control unit.
The batteries are not inserted in
the proper direction, as indicated
by the polarity marks in the
battery compartment.
The set’s remote control sensor
is exposed to strong light (direct
sunlight, inverter type fluorescent
bulb light, etc.).
The remote ID of the main unit
and remote control unit do not
match.
Settings do not match the
remote control unit’s SOURCE
CONTROL switch.
Replace with new batteries.
Operate within the specified
range.
Remove the obstacle.
Insert the batteries in the
proper direction, following the
polarity marks in the battery
compartment.
Move the set to a place in which
the remote control sensor will
not be exposed to strong light.
Set “Remote ID” for the main
unit to “1”.
Match the settings to the remote
control unit’s SOURCE CONTROL
switch.
3
4
4
3
4
31
56
GRemote Control UnitH
Troubleshooting
72
Getting Started Connections Setup Playback Remote Control Multi-zone Information
ENGLISH
Specifications
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-2309 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-2309 in the language / languages: English as an attachment in your email.

The manual is 8,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-2309

Denon AVR-2309 User Manual - German - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info