60741
34
Zoom out
Zoom in
Previous page
1/103
Next page
ENGLISH
I
Channel Level
Adjust channel levels to.obtain equal volume from all speakers.
Test Tone
Select test tone playback method.
[Selectable items]
I
Auto
I:
Automatically switch speaker from which test tone
is
output
Manual
:Manually switch speaker from which test tone
is
output.
Test Tone Start
Output test tone.
[Variable range]
OFF
*
-12dB
- I
OdB
I -
+12dB
*
In
the
case
of a sub woofer, reducing the volume when it
is
at
"-12
dB" will change the setting to "OFF" (none).
Default
Resets the settings to the default values.
~
Operating from
the
main remote control unit
Adjusting with the main remote control unit using the test tones
is
only possible
in
the"
Auto"
mode and only effective
in
the STANDARD
mode.
The
adjusted levels for the different modes are automatically
stored
in
the memory.
[Adjusting using test tones]
Q)
Press [TESn
Test tones
are
output from the various speakers.
CV
Use
<l
t>
to adjust so that the volume
is
equal for
all
speakers.
® When the adjustments are completed, press
[TESn
again.
-When
the menu "Speaker Configuration" - "Surround Back
Speaker" setting
(Gf'page
30)
is
set to
"lspkr",
the surround back
speaker display
is
set to "Surround Back Sp." .
- Speakers set to
"None"
in
the "Speaker Configuration" settings are
not displayed.
- When "Channel Level"
is
adjusted, the adjusted values
are
set for
all
the surround modes.
To
adjust the channel level separately for the
different surround modes, use the operation see page 63.
II
Crossover Frequency
Select crossover frequency from which subwoofer handles
low
range signal.
[Selectable items]
40Hz
60Hz
180Hz
190Hz
100Hz 110Hz
120Hz
150Hz
200Hz 250Hz
Only the portion of the bass sound of the various speakers output
from the subwoofer that has a frequency below the frequency set
here
is
output
Set this according to the
low
frequency reproduction capabilities of
the speakers you are using.
Advanced
Set the crossover frequency separately for the different speakers.
.
~
-If
in
the "Advanced" settings, "Subwoofer Setup"
(Gf'page
30)
in
the menu
is
set to "LFE", it
is
possible to make this setting
for speakers set to "Small"
at
"Speaker Configuration". If set to
"LFE+Main", this setting
can
be
made regardless of the speaker
size.
-
For
speakers set to "Small", sound below the crossover frequency
is
cut from the sound
output
The cut bass sound
is
output from the
subwoofer or front speakers.
- Always set the crossover frequency to
"80
Hz". When using small
speakers, however,
we
recommend setting the crossover frequency
to a higher frequency.
II
Front Speaker
Setup
Select front speakers to use for each surround mode.
[Selectable items]
I
Nonnal
I:
To
change the settings, select "Custom".
Custom
Make separate settings for 2-channel mode.
When set to "Custom", you
can
select beforehand the front speaker
to use for
each
surround mode.
[Selectable items]
DIRECT/STEREO:
[IJ
B
A+B
MULTI
CH:
[IJ
B
A+B
-N·h.
When set to "Custom",
<SPEAKERS>
does not operate.
31
IFor details on
how
to select, set and cancel settings for each menu, see
"Menu
Operations"
(~page
221.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-1909 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-1909 in the language / languages: English as an attachment in your email.

The manual is 14,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-1909

Denon AVR-1909 Quick start guide - English - 2 pages

Denon AVR-1909 User Manual - English - 81 pages

Denon AVR-1909 User Manual - German - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info