60741
14
Zoom out
Zoom in
Previous page
1/103
Next page
ENGLISH
Connecting
the
Speaker Cables
Protection circuit
Carefully check the left (L)
and
right
(R)
channels and +
(red)
and -
(black) polarities
on
the speakers being connected to the AVR-1909,
and
be
sure to interconnect the channels and polarities correctly.
3
Insert the speaker cable's core wire to
the hilt into the speaker terminal.
4
Turn the speaker terminal clockwise to
tighten it.
If the core wires touch the rear panel and the screws etc., or the ±
sides touch each other, the protection circuit will be activated and
the power indicator will flash
red
at intervals of 0.5 secs.
If the protection circuit
is
activated, the speaker output
is
isolated,
and the power supply goes to the standby state. If the power sup-
ply
is
turned off, after the power supply cord
is
withdrawn, please
confirm that speaker cable
and
input cable
are
connected.
Also, if replaying large sound levels by using a speaker having
an
impedance less than that specified
(eg,
4 O/ohmsL the temperature
will rise, and the protection circuit might
be
activated. The power
supply will go into the standby state, and the power indicator will
flash
red
at 2 second intervals.
In
this case, please
switch
off
the
power
supply, and
wait
until
the AVR-1909
has
cooled down,
and
the surrounding ventilation
is
good.
Even
if there are no problems with the surrounding ventilation
and
connections,
in
the event of the protection circuit becoming acti-
vated, due
to
thinking that the AVR-1909
has
failed, please contact
DENON Service center after switching off.
terminal
1
Peel offabout0.03
ftJI0
mmofsheathing
from the tip
of
the speaker cable, then
either twist the core wire tightly or
terminate it.
2
Turn the speaker
counterclockwise to loosen it.
I
When using a banana plug
Tighten the speaker terminal firmly before
~
inserting the banana plug.
~~
~
JlfJi
'"
~0
·n·u.
Use speakers with
an
impedance of 6 to
16
O/ohms. When using
front A
and
B speakers simultaneously, use speakers with
an
impedance of
12
to
16
O/ohms.
Connect the speaker cables
in
such a way that they do not stick out
of the speaker terminals. The protection circuit may
be
activated if
the core wires touch the rear panel or if the
+ and - sides touch each
other
(&
"Protection circuit").
Never touch the speaker terminals while the power supply
is
connected. Doing so could result
in
electric shock.
11
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-1909 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-1909 in the language / languages: English as an attachment in your email.

The manual is 14,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-1909

Denon AVR-1909 Quick start guide - English - 2 pages

Denon AVR-1909 User Manual - English - 81 pages

Denon AVR-1909 User Manual - German - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info