498696
14
Zoom out
Zoom in
Previous page
1/46
Next page
14
ENGLISH
NOTES:
Assignment of low frequency signal range
The signals produced from the subwoofer channel are LFE signals (during playback of Dolby Digital or DTS
signals) and the low frequency signal range of channels set to SMALL in the setup. The low frequency
signal range of channels set to LARGE are produced from those channels.
Crossover Frequency
When Subwoofer is set to Yes at the Speaker Configuration Setting, set the frequency (Hz) below
which the bass sound of the various speakers is to be output from the subwoofer (the crossover
frequency).
For speakers set to Small, sound with a frequency below the crossover frequency is cut, and the cut bass
sound is output from the subwoofer instead.
NOTE: For ordinary speaker systems, we recommend setting the crossover frequency to 80 Hz. When
using small speakers, however, setting the crossover frequency to a high frequency may improve
frequency response for frequencies near the crossover frequency.
Subwoofer mode
The subwoofer mode setting is only valid when Large is set for the front speakers and YES is set for
the subwoofer in the Speaker Configuration settings (see page 12).
When the LFE+MAIN playback mode is selected, the low frequency signal range of channels set to
Large are produced simultaneously from those channels and the subwoofer channel.
In this playback mode, the low frequency range expand more uniformly through the room, but depending
on the size and shape of the room, interference may result in a decrease of the actual volume of the low
frequency range.
Selection of the LFE play mode will play the low frequency signal range of the channel selected with
Large from that channel only. Therefore, the low frequency signal range that are played from the
subwoofer channel are only the low frequency signal range of LFE (only during Dolby Digital or DTS signal
playback) and the channel specified as Small in the setup menu.
Select the play mode that provides bass reproduction with quantity.
When the subwoofer is set to Ye s, bass sound is output from the subwoofer regardless of the subwoofer
mode setting in surround modes other than Dolby/DTS.
In surround modes other than Dolby Digital and DTS, if the subwoofer is set to YES, the low frequency
portion is always output to the subwoofer channel. For details, refer to Surround Modes and Parameters
on page 30.
Setting the Test Tone
Use this setting to adjust to that the playback level between the different channel is equal.
From the listening position, listen to the test tones produced from the speakers to adjust the level.
The level can also be adjusted directly from the remote control unit. (For details, see page 23.)
1
Use the (left) button to the Test Tone.
Press the ENTER or (down) button to switch
to the Digital In Assignment.
17 T.TONE <YES
2
Set the mode.
Select Auto or Manual.
T.TONE AUTO
Auto:
Adjust the level while listening to the test tones
produced automatically from the different speakers.
Manual:
Select the speaker from which you want to produce the test tone to adjust the
level.
3
Press the (down) button to start Test Tone.
4
a. If the Auto mode is selected:
Test tones are automatically emitted from the different speakers.
The test tones are emitted from the different speakers in the following order, at
4-second intervals the first time and second time around, 2-second intervals the
third time around and on:
Use the CURSOR left and right buttons to adjust all the speakers to the same
volume.
The volume can be adjusted between 12 dB and
+12 dB in units of 1 dB.
b. When the Manual mode is selected
Use the CURSOR up and down to select the
speaker for which you want to output test tones,
then use the CURSOR left and right to adjust so
that the volume of the test tones from the various
speakers is the same.
Example:
When the volume is set to 12
dB while the Front Lch speaker is
selected
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
FL C FR SR SBR SBL SL SW
SB
1spkr
2spkrs
When the surround back speaker setting is set to 1sp for Speaker
Configuration, this is set to SB.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-1905 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-1905 in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-1905

Denon AVR-1905 User Manual - German - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info