Manual Denon AVR-1712 (page 16 of 104) (English)

583945

Zoom out

Zoom in

1/104

The acoustic characteristics of the connected speakers and

listening room are measured and the optimum settings are made

automatically. This is called “Audyssey® Auto Setup”.

To perform measurement, place the setup microphone in

multiple locations all around the listening area. For best results,

we recommend you measure in six or more positions, as shown

in the illustration (up to eight positions).

•When performing Audyssey® Auto Setup, Audyssey MultEQ® XT/

Audyssey Dynamic EQ®/Audyssey Dynamic Volume® functions

become active (vpage55, 56).

•To set up the speakers manually, use “Speaker Setup”

(vpage60) on the menu.

NOTE

•Make the room as quiet as possible. Background noise can disrupt

the room measurements. Close windows, silence cell phones,

televisions, radios, air conditioners, ﬂuorescent lights, home

appliances, light dimmers, or other devices as measurements may

be affected by these sounds.

•Cell phones should be placed away from all audio electronics during

the measurement process as Radio Frequency Interference (RFI)

may cause measurement disruptions (even if the cell phone is not

in use).

•Do not unplug the setup microphone from the main unit until

Audyssey® Auto Setup is completed.

•Do not stand between the speakers and setup microphone or allow

obstacles in the path while the measurements are being made. This

will cause inaccurate readings.

•Loud test sounds may be played during Audyssey® Auto setup. This

is part of normal operation. If there is background noise in room,

these test signals will increase in volume.

•Operating

M df during the measurements

will cancel the measurements.

•Measurement cannot be performed when

headphones are connected.

Settings

Here, we explain “Audyssey® Auto Setup”, which allows you to

automatically make the optimal settings for your speakers.

Selecting a listening mode (Surround mode)

(vpage27)

Playback (Basic operation) (vpage20)

nSet up speakers (Audyssey® Auto Setup)

(vpage13)

Playback (Advanced operation) (vpage41)

Set up speakers (Audyssey® Auto Setup)

About setup microphone placement

•Measurements are performed by placing the setup microphone

successively at multiple positions throughout the entire listening

area, as shown in GExample qH. For best results, we recommend

you measure in six or more positions, as shown in the illustration

(up to eight positions).

•Even if the listening environment is small as shown in GExample wH,

measuring at multiple points throughout the listening environment

results in more effective correction.

FL SW C FR

SRSL *M

FL SW C FR

SRSL *M

( : Measuring positions)

GExample qH GExample wH

( : Measuring positions)

FL Front speaker (L) SW Subwoofer

FR Front speaker (R) SL Surround speaker (L)

CCenter speaker SR Surround speaker (R)

About the main listening position (*M)

The main listening position is the position where listeners would

normally sit or where one would normally sit alone within the listening

environment. Before starting Audyssey® Auto Setup, place the setup

microphone in the main listening position. Audyssey MultEQ® XT uses

the measurements from this position to calculate speaker distance,

level, polarity, and the optimum crossover value for the subwoofer.

Basic version

Advanced version

Information

Basic version

vSee overleaf

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-1712 in the language / languages: English as an attachment in your email.

The manual is 22,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-1712

Denon AVR-1712 Quick start guide - English - 16 pages

Denon AVR-1712 User Manual - Spanish - 104 pages

Denon AVR-1712 Quick start guide - Spanish - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Denon AVR-1712 Manual

Product: