583940
39
Zoom out
Zoom in
Previous page
1/48
Next page
Maintenance 39
English
Aligning the Print Head
If you notice that vertical lines are not aligned
properly on the nozzle check printout, you may be
able to solve this problem by aligning the print head.
Note:
Make sure the front tray is in the paper position (lower position)
and the CD/DVD tray is not inserted in this product (& page 8).
1. Make sure the product is turned on and not
printing.
2. Load A4-size plain paper (& page 8).
3. Press the F [Setup] button.
4. Use the l or r button to select Maintenance,
then press OK.
5. Use the u or d button to select Head
Alignment, then press OK.
6. Press the x Start button. Four rows of alignment
patterns are printed.
Note:
Do not press the y Stop/Clear button while printing an
alignment pattern.
7. Look at pattern #1 and find the patch that is most
evenly printed, with no noticeable streaks or
lines.
8. Press the r button then use the u or d button to
select the number for that patch.
9. Press OK, then enter the numbers for the other
patterns in the same way.
10. When you are done, press OK and you see a Print
head alignment is complete. message.
Changing the Language
Displayed on the LCD
Screen
You can change the language displayed on the LCD
screen using the following procedure. Certain type of
products may not have this function.
1. Press the F [Setup] button.
2. Use the l or r button to select Maintenance,
then press OK.
3. Use the u or d button to select Language, then
press OK.
4. Use the u or d button to select the language that
you want to display.
5. Press OK.
Setting the Screen Saver
If you set the screen saver, the slide show begins after
the product is inactive for more than three minutes.
1. Press the F [Setup] button.
2. Use the l or r button to select Maintenance,
then press OK.
3. Use the u or d button to select Screen Saver
Settings, then press OK.
4. Use the u or d button to select Memory Card
Data.
5. Press OK.
Restoring Default Settings
If you want to reset the print and copy settings to
their original factory defaults, follow these steps:
1. Press the F [Setup] button.
2. Use the l or r button to select Restore Default
Settings.
3. Press OK.
4. A confirmation message is displayed on the LCD
screen. Then press OK to restore the settings.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-1613 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-1613 in the language / languages: English as an attachment in your email.

The manual is 23,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-1613

Denon AVR-1613 Quick start guide - English - 10 pages

Denon AVR-1613 User Manual - Spanish - 131 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info