498684
11
Zoom out
Zoom in
Previous page
1/73
Next page
11
ENGLISH
3
Use the (left) and (right) buttons to select your surround speaker type.
3 SURR. SMALL
LARGE
SMALL
NONE
(Initial)
(left) button (right) button
Press the ENTER or (down) button to switch to the surround back speaker
setting.
4
Use the (left) and (right) buttons to select your surround back speaker type.
4 S.BACK SMALL
LARGE
SMALL
NONE
(Initial)
(left) button (right) button
Press the ENTER or (down) button to switch to the subwoofer setting.
NOTE:
When Small has been selected for the front speakers, Large cannot be selected for the surround speakers.
NOTE:
When Small has been selected for the surround speakers, Large cannot be selected for the surround back
speakers.
5
Use the (left) and (right) buttons to select your subwoofer setting.
5 S.WOOFER YES
YES
NO
(Initial)
(left) button (right) button
Press the ENTER or (down) button to enter the settings and switch to the
subwoofer mode setting.
Parameters
Large…… Select this when using speakers that can fully reproduce low sounds of below 80 Hz.
Small…… Select this when using speakers that cannot reproduce low sounds of below 80 Hz with sufficient
volume. When this setting is selected, low frequencies of below 80 Hz are assigned to the
subwoofer.
None…… Select this when no speakers are installed.
Yes/No. Select Yes when a subwoofer is installed, No when its not installed.
NOTE:
Select Large or Small not according to the physical size of the speaker, but according to the bass
reproduction capacity at 80 Hz. If you cannot determine the best setting, try comparing the sound when set to
Small and when set to Large, at a level that will not damage the speakers.
Caution:
In case the subwoofer is not used, be sure to set Subwoofer = No, or the bass sound of front channel is
divided to subwoofer channel and not reproduced in some mode.
Setting the Subwoofer mode and Crossover Frequency
1
Use the (left) and (right) buttons to select the Subwoofer mode.
6 SW MODE NORM
NORM +MAIN
(Initial)
(left) button (right) button
Press the ENTER or (down) button to enter the setting and switch to the
Crossover Frequency setting.
2
Use the (left) and (right) buttons to select the Crossover Frequency.
7 CR.OVER 80Hz
80Hz
100Hz
120Hz 150Hz
(Initial)
(left) button (right) button
Press the ENTER or (down) button to enter the setting and switch to the
SPEAKER DISTANCE setting.
NOTES:
Assignment of low frequency signal range
The signals produced from the subwoofer channel are LFE signals (during playback of Dolby Digital or DTS
signals) and the low frequency signal range of channels set to SMALL in the setup. The low frequency
signal range of channels set to LARGE are produced from those channels.
Crossover Frequency
When Subwoofer is set to Yes at the Speaker Configuration Setting, set the frequency (Hz) below
which the bass sound of the various speakers is to be output from the subwoofer (the crossover
frequency).
For speakers set to Small, sound with a frequency below the crossover frequency is cut, and the cut bass
sound is output from the subwoofer instead.
NOTE: For ordinary speaker systems, we recommend setting the crossover frequency to 80 Hz. When
using small speakers, however, setting the crossover frequency to a high frequency may improve
frequency response for frequencies near the crossover frequency.
Subwoofer mode
The subwoofer mode setting is only valid when LARGE is set for the front speakers and YES is set for
the subwoofer in the Speaker Configuration settings (see pages 10, 11).
If SMALL is set for the front speakers or NO is set for the subwoofer, the subwoofer mode setting
does not affect playback of low frequency signal range.
When the +MAIN playback mode is selected, the low frequency signal range of channels set to
LARGE are produced simultaneously from those channels and the subwoofer channel.
In this playback mode, the low frequency range expand more uniformly through the room, but depending
on the size and shape of the room, interference may result in a decrease of the actual volume of the low
frequency range.
When the NORM playback mode is selected, the low frequency signal range of channels set to LARGE
are only produced from those channels. In this playback mode there tends to be little interference of the
low frequency range in the room.
Try playing the music or movie source and select the playback mode providing the stronger low frequency
range sound.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-1604 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-1604 in the language / languages: English, German as an attachment in your email.

The manual is 6,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-1604

Denon AVR-1604 User Manual - English, French - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info