498647
8
Zoom out
Zoom in
Previous page
1/10
Next page
7
ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS ESPAÑOL NEDERLANDS SVENSKA
7
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
3
Use ui to select a speaker, and use
o p to select distance.
Front L / Front R / Center / Subwoofer /
Surround L / Surround R
Select the speaker.
0.0ft – 60.0ft : Set the distance.
The speakers that can be selected differ
depending on the “Speaker Confi g.”
(vpage5) settings.
Default settings :
Front L / Front R / Center / Subwoofer : 12.0 ft
Surround L / Surround R : 10.0 ft
Set the difference in the distance between the
speakers to less than 20 ft.
NOTE
Speakers set to “None” in “Speaker Confi g.”
(vpage5) are not displayed.
4
Press ENTER to enter the setting.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Step
Front L/R
Center
Subwoofer
Surround L/R
Speaker Setup
1
Use ui to select “Channel Level”,
and then press ENTER.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Test Tone Start
Default
Speaker Setup
Enter ReturnENTER
BACK
Test Tone Start
Default
1
Channel Level
2
Press ENTER.
Output test tone.
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Front L
Center
Front R
Surround R
Surround L
Subwoofer
1
Channel Level
Enter ReturnENTER
BACK
3
Use ui to select a speaker, and use
o p to adjust the sound volume of
each speaker to be equal.
Front L / Center / Front R / Surround R /
Surround L / Subwoofer
Select the speaker.
–12.0dB – +12.0dB (0.0dB) : Adjust the volume.
• When o is pressed while the subwoofer volume
is set to “–12 dB”, the “Subwoofer” setting
switches to “OFF”.
When “Channel Level” is adjusted, the adjusted
values are set for all the surround modes. To
adjust the channel level separately for the
different surround modes, use the operation
see vm page 25 “Adjusting the volume of
the speakers“.
NOTE
• Speakers set to “None” in the “Speaker Confi g.”
(vpage5) settings are not displayed.
When a headphones jack is inserted in the
PHONES jack of this unit, the “Channel Level”
is not displayed.
4
Press ENTER to enter the setting.
Test Tone Start
Default
1
Channel Level
Default
The “Channel Level” settings are
returned to the default settings.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
5
Press BACK.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Test Tone Start
Default
Speaker Setup
Distance (Cont.)
Channel Level
Default settings are underlined.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-1513 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-1513 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-1513

Denon AVR-1513 User Manual - English - 62 pages

Denon AVR-1513 User Manual - German - 62 pages

Denon AVR-1513 User Manual - Dutch - 62 pages

Denon AVR-1513 User Manual - Spanish - 60 pages

Denon AVR-1513 Quick start guide - Spanish - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info