498673
13
Zoom out
Zoom in
Previous page
1/59
Next page
13
ENGLISH
DENON and other makes of components can be operated by setting the preset memory.
This remote control unit can be used to operate components of other manufacturers without using the learning
function by registering the manufacturer of the component as shown on the List of Preset Codes (pages
199~201).
Operation is not possible for some models.
Preset memory
1
Set mode switch 1 to AUDIO or VIDEO.
2
4
Referring to the included List of Preset Codes, use the number buttons to input the
preset code (a 3-digit number) for the manufacturer of the component whose signals
you want to store in the memory.
1
2
3
456
789
0
5
To store the codes of another component in the memory, repeat steps 1 to 4.
3
2
1
4
3
Set mode switch 2 to the component to be
registered.
NOTES:
The signals for the pressed buttons are emitted while setting the preset memory. To avoid accidental
operation, cover the remote control units transmitting window while setting the preset memory.
Depending on the model and year of manufacture, this function cannot be used for some models, even if
they are of makes listed on the included list of preset codes.
Some manufacturers use more than one type of remote control code. Refer to the included list of preset
codes to change the number and check.
The preset memory can be set for one component only among the following: CDR/MD, DVD/VDP
and DBS/CABLE.
The preset codes are as follows upon shipment from the factory and after resetting:
TV, VCR......................................................................HITACHI
CD, TAPE...................................................................DENON
CDR/MD ....................................................................DENON (CDR)
DVD/VDP ...................................................................DENON (DVD)
DBS/CABLE...............................................................ABC (CABLE)
Set the AUDIO side for the CD, Tape deck or
CDR/MD position, to the VIDEO side for the
DVD/VDP, DBS/CABLE, VCR or TV position.
3
Press the ON/SOURCE button and the OFF
button at the same time.
Indicator flash.
Operating component stored in the preset memory
3
2
1
3
3
NOTE:
Some manufacturers use different names for
the DVD remote control buttons, so also refer to
the instructions on remote control for that
component.
2
Operate the component.
For details, refer to the components operating instructions.
Some models cannot be operated with this remote control unit.
1. Digital video disc player (DVD, DVD SETUP) system buttons
POWER : Power on/standby
(ON/SOURCE)
OFF : DENON DVD power off
6,7 : Manual search
(forward and reverse)
2 : Stop
1 :Play
8,9 : Auto search (to beginning of track)
3 : Pause
0 ~ 9, +10 : 10 key
DISC SKIP + : Disc skip (for DVD changer only)
DISPLAY : Switch display
MENU : Menu
RETURN : Return
SETUP : Setup
ENTER : Enter setting
, ª,
0
,
1
: Cursor up, down, left and right
1
Set mode switch 1 to AUDIO or VIDEO.
2
Set mode switch 2 to the component you want
to operate.
Set the AUDIO side for the CD, Tape deck or
CDR/MD position, to the VIDEO side for the
DVD/VDP, DBS/CABLE, VCR or TV position.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-1404 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-1404 in the language / languages: English, German as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info