616171
80
Zoom out
Zoom in
Previous page
1/117
Next page

Getting Started Connections Setup Playback Remote Control Information Troubleshooting
Multi-Zone Operations
Turning the Power On and Off
GOperation on the main unitH
Press <ZONE2 ON/OFF>, <ZONE3 ON/OFF> or <ZONE4 ON/OFF> for
the zone to be operated.
When the power turns on, the multi-zone indicator lights on the display.
GOperation on the remote control unitH
In the zone mode you want to operate, press [ON] or [OFF].
Selecting the Input Source
GOperation on the main unitH
q Press <ZONE2/3/4 / REC SELECT> and select the zone to be adjusted.
w Turn <SOURCE SELECT>.
GOperation on the remote control unitH
In the zone mode you want to operate, press [SOURCE SELECT].
Adjusting the Volume
GOperation on the main unitH
q Press <ZONE2/3/4 / REC SELECT> and select the zone to be adjusted.
w Turn <VOLUME> to adjust.
GOperation on the remote control unitH
In the zone mode whose volume you want to adjust, press [VOLUME].
[Variable range]
– – –
–70dB
~
–40dB
~
18dB
The volume can be adjusted when GUI menu “Manual Setup”
“Zone Setup” “(select the zone)” “Volume Level” is set to
“Variable. The volume can be increased up to the value set at
GUI menu “Manual Setup” “Zone Setup” “(select the zone)”
“Volume Limit” (vpage 37).
The volume for ZONE2 and ZONE3 can be adjusted with the remote
control unit.
SOURCE SELECT
<ZONE2 ON/OFF>
<ZONE2/3/4/ REC SELECT>
<ZONE3 ON/OFF>
<ZONE4 ON/OFF>
VOLUME
[Z2 ON]
[OFF]
[MUTE]
VOLUME
[ AMP]
SOURCE
SELECT
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
ZONE2 MENU
INPUT :DVD
SIGNAL:ANALOG
VOL. :-40dB
>Bass 0dB
HPF OFF
Treble 0dB
Lch Lev. 0dB
Rch Lev. 0dB
ZONE2 MENU
>Channel STEREO
Vol.Lev. VAR
P.On Lev. LAST
Vol.Limit OFF
Mute Lev. FULL
Turning off the Sound Temporarily
In the zone mode for which you want to mute the sound, press
[MUTE].
The sound is reduced to the level set at GUI menu “Manual Setup”
“Zone Setup” – “(select the zone)” – “Mute Level” (vpage 37).
To cancel, either adjust the volume or press [MUTE] again.
The setting is canceled when the zone’s power is turned off.
The source selected for ZONE3 is also output from the recording
output connectors.
When the [MENU] is selected, it is possible to carryout “Zone Setup”
looking at the on-screen display in ZONE2. Also, when the OSD” is
set as “ZONE2/ZONE3”, the on-screen display comes on the ZONE2
monitor when ZONE3 has been operated so it is possible to operate
it looking at this.
NOTE
The digital signal from the digital input connectors (OPTICAL/
COAXIAL) are output to the analog audio connectors in ZONE2 and
ZONE3 in the case of PCM (2-channel) signals only.
Digital audio signals input from the DENON LINK or HDMI connectors
cannot be played in multi-zone.
The digital output (OPTICAL) from ZONE2 and ZONE4 cannot be
copyrighted network signals (internet radio, media server, and
USB).
When certain digital signals are being input, noise may be output
from the ZONE2 and ZONE3 audio output connectors.
(ZONE3 or
ZONE4 mode)
[OFF]
[ON]
[MENU]
[ZONE SELECT]
[OFF]
[MUTE]
Multi-zone
indicator
[ON]
VOLUME
[MENU]
SOURCE SELECT
(Main remote control unit)
(Sub remote control unit)
Multi-Zone
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVC-A1HDA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVC-A1HDA in the language / languages: English as an attachment in your email.

The manual is 14,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info