616171
26
Zoom out
Zoom in
Previous page
1/117
Next page

Getting Started Setup Playback Remote Control Multi-Zone Information Troubleshooting
NOTE
Insert the AC plugs securely. Incomplete connections could cause noise.
Only use the AC outlet to plug in audio devices. Do not use them as power supplies for hairdryers or
anything other than audio equipment. In addition, do not connect audio devices such as high electricity
consumption power amplifiers (e.g. POA-A1HD).
Wait until all connections have been completed before connecting the power cord.
To household
power outlet
(AC 230 V, 50 Hz)
Power cord
(included)
Connection to the AC outlet
These outlets supply power to external audio
devices.
The power supplied from this outlet turns on and off
together with the set’s power switch.
Audio equipment with a total power consumption
of 100 W (0.43 A) can be connected.
Connecting the Power Cord
Trigger output jacks
The power of an external device equipped with
a trigger input jack can be turned on and off in
association with operations on the AVP-A1HD. For
details, see GUI menu “Manual Setup” – Option
Setup” – “Trigger Out 1”, “Trigger Out 2”, “Trigger
Out 3” or “Trigger Out 4” (vpage 40).
Output level: 250 mA/12 V
Check the trigger input conditions of the
connected device.
External Controller
When using in combination with an RF Remote Controller (RC-7000CI, sold separately) and RF Remote
Receiver (RC-7001RCI, sold separately) two-way communication with an RF Remote Controller is possible.
The AVP-A1HD’s status information as well as iPod and Internet audio music files can be browsed
watching the RF Remote Controllers display. For details, refer to the operating instructions of the
respective devices.
When used in combination with an RF Remote Controller and RF Remote Receiver, make the settings at
GUI menu “Manual Setup” – Option Setup” – “2Way Remote” – “Used” (vpage 40).
When using the 2-way remote control unit, connect to the Port 1 RS-232C connector.
If GUI menu “Manual Setup” – Option Setup” – “2Way Remote”is set to “Used”, you cannot use port 1
of the RS-232C terminal for the external controller.
RS-232C connector
This connector is used for an external controller.
b If you use an external controller to operate
the unit via the RS-232C terminal, you must
confirm the following beforehand.
q Turn on the AVP-A1HD’s power.
w Turn off the AVP-A1HD’s power from the
external controller.
e AVP-A1HD enters the standby status.
Turning the Power On (vpage 54)
Once Connections are Completed
Connections
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVC-A1HDA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVC-A1HDA in the language / languages: English as an attachment in your email.

The manual is 14,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info