616171
14
Zoom out
Zoom in
Previous page
1/117
Next page
0
Getting Started Setup Playback Remote Control Multi-Zone Information Troubleshooting
The illustration below shows a basic example of installation of the amplifier combined with 8 speakers and
a monitor.
Speaker Layout
Subwoofer Center speaker
Surround speakers
Front speakers
Place the front speakers to the
sides of the monitor or screen and
as flush with the screen surface as
possible.
Surround back speakers
The table below shows a typical speaker configuration for the AVP-A1HD.
FRONT
CENTER
SURROUND
A
SURROUND
B
SURROUND BACK
SUBWOOFER
(b)
L R L R L R L R 1 only
9.1-channels
S S S S S S S S S
S
7.1-channels
S S S S S
S S
S
6.1-channels
S S S S S
S S
5.1-channels
S S S S S
S
3.1-channels
S S S
S
2.1-channels
S S
S
2-channels
S S
Two surround back speakers are required to use the THX Ultra2 Cinema,THX Music mode and THX Games
mode.
Set the surround back speakers so that the distance to the listening position is the same for both the left
and right speakers. It is also recommended that the deviations of the distance from the listening position
to L and R channel speakers (front left (FL) and front right (FR), surround left (SL) and surround right (SR),
surround back left (SBL) and surround back right (SBR)) is less than 60 cm.
b The AVP-A1HD can be connected to a maximum of 3 subwoofers.
Connections
For instructions for connecting speakers, please refer to the POA-A1HD owner’s manual.
When using just one surround back speaker, connect it to the left channel (SBL).
Connect the AVP-A1HD pre-out terminal to the power amp (sold separately).
AVP-A1HD has a RCA pre-out terminal and XLR pre-out terminal. Connect accordingly with the power
amp you want to use.
The polarity of the XLR pre-out terminal can be switched using GUI menu “Manual Setup” “Option
Setup” – “XLR Out Polarity” (vpage 38).
Connect the speakers to the power amp.
Refer to the owner’s manual of each piece of equipment when making connections.
POA-A1HD Connection and Operation
When connecting the AVP-A1HD to the power amp POA-A1HD with a control link cable (included with
the POA-A1HD), you can perform the following control operations.
POA-A1HD channel input selection and power amp settings
Link POA-A1HD to AVP-A1HD On/Standby control
Link POA-A1HD meter operation to AVP-A1HD display on/off control (vpage 41)
Updating POA-A1HD firmware (vpage 41)
Up to 2 POA-A1HD units can be connected. Refer to the POA-A1HD owner's manual for making
connections and POA-A1HD settings.
Connecting to the Power Amp
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVC-A1HDA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVC-A1HDA in the language / languages: English as an attachment in your email.

The manual is 14,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info