429839
43
Zoom out
Zoom in
Previous page
1/47
Next page
ENGLISH
Getting Started Connections Setting Playback Information Troubleshooting
GraphicalUserInterface
English
GUI Menu Operations (vpage 9)
GUI Menu Map (vpage 9)
Deutsch
GUI-Menübedienung (vSeite 9)
GUI-Menüplan (vSeite 9)
Français
Fonctionnement du menu de l’interface
graphique GUI (vpage 9)
Plan du menu de l’interface graphique GUI
(vpage 9)
Italiano
Operazioni menu GUI (vpagina 9)
Mappa menu GUI (vpagina 9)
Español
Uso de los menús GUI (vpágina 9)
Estructura de los menús GUI (vpágina 9)
Nederlands
Het GUI menu bedienen (vblz. 9)
Overzicht van het GUI menu (vblz. 9)
Svenska
Användning av GUI-menyerna
(vsidan 9)
GUI-menyöversikt (vsidan 9)
Control Dock for iPod
®
ASD-51W
iPod is a trademark of Apple Inc., registered in
the U.S. and other countries.
Owner’s Manual
Bedienungsanleitung
Manuel de l’Utilisateur
Manuale delle istruzioni
Manual del usuario
Gebruiksaanwijzing
Bruksanvisning
I
ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer
s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
12. Unplug this apparatus during lightning storms or when
unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
14. Batteries shall not be exposed to excessive heat such as sunshine, fire or the
like.
CAUTION:
To completely disconnect this product from the mains, disconnect the plug
from the wall socket outlet.
The mains plug is used to completely interrupt the power supply to the unit
and must be within easy access by the user.
VORSICHT:
Um dieses Gerät vollständig von der Stromversorgung abzutrennen, ziehen
Sie bitte den Stecker aus der Wandsteckdose.
Der Netzstecker wird verwendet, um die Stromversorgung zum Gerät völlig zu
unterbrechen; er muss für den Benutzer gut und einfach zu erreichen sein.
PRECAUTION:
Pour déconnecter complètement ce produit du courant secteur, débranchez
la prise de la prise murale.
La prise secteur est utilisée pour couper complètement l’alimentation de
l’appareil et l’utilisateur doit pouvoir y accéder facilement.
ATTENZIONE:
Per scollegare completamente questo prodotto dalla rete di alimentazione
elettrica, scollegare la spina dalla relativa presa a muro.
La spina di rete viene utilizzata per interrompere completamente l’alimentazione
all’unità e deve essere facilmente accessibile all’utente.
PRECAUCIÓN:
Para desconectar completamente este producto de la alimentación eléctrica,
desconecte el enchufe del enchufe de la pared.
El enchufe de la alimentación eléctrica se utiliza para interrumpir por completo
el suministro de alimentación eléctrica a la unidad y debe de encontrarse en
un lugar al que el usuario tenga fácil acceso.
WAARSCHUWING:
Om de voeding van dit product volledig te onderbreken moet de stekker uit
het stopcontact worden getrokken.
De netstekker wordt gebruikt om de stroomtoevoer naar het toestel volledig
te onderbreken en moet voor de gebruiker gemakkelijk bereikbaar zijn.
FÖRSIKTIHETSMÅTT:
Koppla loss stickproppen från eluttaget för att helt skilja produkten från nätet.
Stickproppen används för att helt bryta strömförsörjningen till apparaten, och
den måste vara lättillgänglig för användaren.
II
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANCAIS DEUTSCH ENGLISH
FCC Information (For US customers)
1. COMPLIANCE INFORMATION
Product Name: Control Dock for iPod
Model Number: ASD-51W
This product contains FCC ID: PPQ- NM100BB.
This product complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1 ) this product may not cause harmful
interference, and (2) this product must accept any interference received,
including interference that may cause undesired operation.
Denon Electronics (USA), LLC
100 Corporate Drive, Marwah, NJ 07430-2041
Tel. 201-762-6500 (Main)
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in this
manual, meets FCC requirements. Modification not expressly approved by
DENON may void your authority, granted by the FCC, to use the product.
3. CAUTION
• To comply with FCC RF exposure compliance requirement, separation
distance of at least 20 cm must be maintained between the antenna of
this product and all persons.
• This product and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
4. NOTE
This product has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This product generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television reception,
which can be determined by turning the product OFF and ON, the user
is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the product into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the local retailer authorized to distribute this type of product or an
experienced radio/TV technician for help.
IC Information (For Canadian customers)
1. PRODUCT
This product contains IC 4491A-NM100BB.
This product complies with RSS-210 of Industry Canada. Operation is
subject to the following two conditions: (1) this product may not cause
harmful interference, and (2) this product must accept any interference
received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
APPAREIL
Cet appareil contiens IC 4491A-NM100BB.
Cet appareil est conforme à la norme CNR-210 du Canada. L
’utilisation de ce
dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne
doit pas produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique reçu, même si ce brouillage est
susceptible de compromettre le fonctionnement du dispositif.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
2. CAUTION
To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that permitted for successful communication.
ATTENTION
Afin de réduire le risque d’interférence aux autres utilisateurs, il faut choisir
le type d’antenne et son gain de façon à ce que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne soit pas supérieure au niveau requis pour
l’obtention d’une communication satisfaisante.
R&TTE Directive 1999/5/EC
This product may be operated in the following countries;
AT BE CZ DK FI
FR DE GR HU IE
IT NL PL PT SK
ES SE GB NO CH
ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
III
DECLARACIÓN DE CONFORMIDAD
Por la presente, D&M Holdings Inc., Denon Brand Company, declara que este
ASD-51W cumple con los requisitos esenciales y otras exigencias relevantes
de la Directiva 1999/5/EC, esta conforme con los siguientes estandares:
EN60950, EN55013, EN55020, EN55022, EN55024, EN61000-3-2,
EN61000-3-3, EN300328, EN301489-01, EN301489-17 y EN50385.
Puede consultar a nuestro representante europeo, DENON Europe, acerca de
la declaración de conformidad.
EENVORMIGHEIDSVERKLARING
Hierbij verklaart D&M Holdings Inc., Denon Brand Company dat het toestel
ASD-51W in overeenstemming is met de essentiële eisen en de andere
relevante bepalingen van richtlijn 1999/5/EG, in overeenstemming is met de
volgende normen:
EN60950, EN55013, EN55020, EN55022, EN55024, EN61000-3-2,
EN61000-3-3, EN300328, EN301489-01, EN301489-17 en EN50385.
De eenvormigheidsverklaring mag worden geconsulteerd aan onze Europese
vertegenwoordiger, DENON Europa.
ÖVERENSSTÄMMELSESINTYG
Denna utrustning är i överensstämmelse med de väsentliga kraven och andra
relevanta bestämmelser i Direktiv 1999/5/EC, uppfyller foljande standarder:
EN60950, EN55013, EN55020, EN55022, EN55024, EN61000-3-2,
EN61000-3-3, EN300328, EN301489-01, EN301489-17 och EN50385.
EU-konformitetsintyget kan begäran fås från DENON Europe, vår
representant i Europa.
DECLARATION OF CONFORMITY
Hereby, D&M Holdings Inc., Denon Brand Company declares that this product
ASD-51W is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC, in conformity with the following standards;
EN60950, EN55013, EN55020, EN55022, EN55024, EN61000-3-2,
EN61000-3-3, EN300328, EN301489-01, EN301489-17 and EN50385
The declaration of conformity may be consulted to our European representative,
DENON Europe.
ÜBEREINSTIMMUNGSERKLÄRUNG
Hiermit erklärt D&M Holdings Inc., Denon Brand Company, dass sich das Gerät
ASD-51W in Übereinstimmung mit den grundlegenden Anforderungen und
den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet,
den folgenden Standards entspricht:
EN60950, EN55013, EN55020, EN55022, EN55024, EN61000-3-2,
EN61000-3-3, EN300328, EN301489-01, EN301489-17 und EN50385
Wenden Sie sich bei Fragen zur Konformitätserklärung an unseren europäischen
Vertreter, DENON Europe.
DECLARATION DE CONFORMITE
Par la présente, D&M Holdings Inc., Denon Brand Company déclare que
l’appareil ASD-51W est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE, e conforme alle seguenti
normative:
EN60950, EN55013, EN55020, EN55022, EN55024, EN61000-3-2,
EN61000-3-3, EN300328, EN301489-01, EN301489-17 e EN50385.
La déclaration de conformité pourra être consultée auprès de notre
représentant en Europe, DENON Europe.
DICHIARAZIONE DI CONFORMITÀ
Con la presente D&M Holdings Inc., Denon Brand Company dichiara che questo
ASD-51W è con-forme ai requisiti essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE, e conforme alle seguenti normative:
EN60950, EN55013, EN55020, EN55022, EN55024, EN61000-3-2,
EN61000-3-3, EN300328, EN301489-01, EN301489-17 e EN50385.
La dichiarazione di conformità può essere consultata presso il nostro
rappresentante europeo, DENON Europe.
QUESTO PRODOTTO E’ CONFORME
AL D.M. 28/08/95 N. 548
DENON EUROPE
Division of D&M Germany GmbH
An der Landwehr 19, Nettetal,
D-41334 Germany
ENGLISHSVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANCAIS DEUTSCH ENGLISH
IV
CAUTION:
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the unit.
Observe and follow local regulations regarding battery disposal.
Do not expose the unit to dripping or splashing fluids.
Do not place objects filled with liquids, such as vases, on the unit.
ACHTUNG:
Die Belüftung sollte auf keinen Fall durch das Abdecken der Belüftungsöffnungen durch Gegenstände wie beispielsweise Zeitungen,
Tischtücher, Vorhänge o. Ä. behindert werden.
Auf dem Gerät sollten keinerlei direkte Feuerquellen wie beispielsweise angezündete Kerzen aufgestellt werden.
Bitte beachten Sie bei der Entsorgung der Batterien die örtlich geltenden Umweltbestimmungen.
Das Gerät sollte keiner tropfenden oder spritzenden Flüssigkeit ausgesetzt werden.
Auf dem Gerät sollten keine mit Flüssigkeit gefüllten Behälter wie beispielsweise Vasen aufgestellt werden.
ATTENTION:
La ventilation ne doit pas être gênée en recouvrant les ouvertures de la ventilation avec des objets tels que journaux, rideaux, tissus, etc.
Aucune flamme nue, par exemple une bougie, ne doit être placée sur l’appareil.
Veillez à respecter les lois en vigueur lorsque vous jetez les piles usagées.
L’appareil ne doit pas être exposé à l’eau ou à l’humidité.
Ne pas poser d’objet contenant du liquide, par exemple un vase, sur l’appareil.
ATTENZIONE:
Le aperture di ventilazione non devono essere ostruite coprendole con oggetti, quali giornali, tovaglie, tende e così via.
Non posizionate sull’unità fiamme libere, come ad esempio candele accese.
Prestate attenzione agli aspetti legati alla tutela dell’ambiente nello smaltimento delle batterie.
L’apparecchiatura non deve essere esposta a gocciolii o spruzzi.
Non posizionate sull’unità alcun oggetto contenente liquidi, come ad esempio i vasi.
PRECAUCIÓN:
La ventilación no debe quedar obstruida por haberse cubierto las aperturas con objetos como periódicos, manteles, cortinas, etc.
No debe colocarse sobre el aparato ninguna fuente inflamable sin protección, como velas encendidas.
A la hora de deshacerse de las pilas, respete la normativa para el cuidado del medio ambiente.
No exponer el aparato al goteo o salpicaduras cuando se utilice.
No colocar sobre el aparato objetos llenos de líquido, como jarros.
WAARSCHUWING:
De ventilatie mag niet worden belemmerd door de ventilatieopeningen af te dekken met bijvoorbeeld kranten, een tafelkleed, gordijnen, enz.
Plaats geen open vlammen, bijvoorbeeld een brandende kaars, op het apparaat.
Houd u steeds aan de milieuvoorschriften wanneer u gebruikte batterijen wegdoet.
Stel het apparaat niet bloot aan druppels of spatten.
Plaats geen voorwerpen gevuld met water, bijvoorbeeld een vaas, op het apparaat.
OBSERVERA:
Ventilationen bör inte förhindras genom att täcka för ventilationsöppningarna med föremål såsom tidningar, bordsdukar, gardiner osv.
Inga blottade brandkällor, såsom tända ljus, får placeras på apparaten.
Tänk på miljöaspekterna när du bortskaffar batterier.
Apparaten får inte utsättas för vätska.
Placera inte föremål fyllda med vätska, t.ex. vaser, på apparaten.
ENGLISHENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
V
NOTE ON USE
Avoid high temperatures.
Allow for sufficient heat dispersion when installed in a rack.
Handle the power cord carefully.
Hold the plug when unplugging the cord.
Keep the unit free from moisture, water, and dust.
Unplug the power cord when not using the unit for long periods of time.
Do not obstruct the ventilation holes.
Do not let foreign objects into the unit.
Do not let insecticides, benzene, and thinner come in contact with the unit.
Never disassemble or modify the unit in any way.
HINWEISE ZUM GEBRAUCH
Vermeiden Sie hohe Temperaturen.
Beachten Sie, dass eine ausreichende Belüftung gewährleistet wird, wenn das Gerät auf ein
Regal gestellt wird.
Gehen Sie vorsichtig mit dem Netzkabel um.
Halten Sie das Kabel am Stecker, wenn Sie den Stecker herausziehen.
Halten Sie das Gerät von Feuchtigkeit, Wasser und Staub fern.
Wenn das Gerät längere Zeit nicht verwendet werden soll, trennen Sie das Netzkabel vom
Netzstecker.
Decken Sie den Lüftungsbereich nicht ab.
Lassen Sie keine fremden Gegenstände in das Gerät kommen.
Lassen Sie das Gerät nicht mit Insektiziden, Benzin oder Verdünnungsmitteln in Berührung
kommen.
Versuchen Sie niemals das Gerät auseinander zu nehmen oder zu verändern.
OBSERVATIONS RELATIVES A L’UTILISATION
Eviter des températures élevées.
Tenir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère.
Manipuler le cordon d’alimentation avec précaution.
Tenir la prise lors du débranchement du cordon.
Protéger l’appareil contre l’humidité, l’eau et la poussière.
Débrancher le cordon d’alimentation lorsque l’appareil n’est pas utilisé pendant de longues
périodes.
Ne pas obstruer les trous d’aération.
Ne pas laisser des objets étrangers dans l’appareil.
Ne pas mettre en contact des insecticides, du benzène et un diluant avec l’appareil.
Ne jamais démonter ou modifier l’appareil d’une manière ou d’une autre.
NOTE SULL’USO
Evitate di esporre l’unità a temperature elevate.
Assicuratevi che vi sia un’adeguata dispersione del calore quando installate l’unità in un
mobile per componenti audio.
Manneggiate il cavo di alimentazione con attenzione.
Tenete ferma la spina quando scollegate il cavo dalla presa.
Tenete l’unità lontana dall’umidità, dall’acqua e dalla polvere.
Scollegate il cavo di alimentazione quando prevedete di non utilizzare l’unità per un lungo
periodo di tempo.
Non coprite i fori di ventilazione.
Non inserite corpi estranei all’interno dell’unità.
Assicuratevi che l’unità non entri in contatto con insetticidi, benzolo o solventi.
Non smontate né modificate l’unità in alcun modo.
NOTAS SOBRE EL USO
Evite altas temperaturas.
Permite la suficiente dispersión del calor cuando está instalado en la consola.
Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el cordón de energía.
Mantenga el equipo libre de humedad, agua y polvo.
Desconecte el cordón de energía cuando no utilice el equipo por mucho tiempo.
No obstruya los orificios de ventilación.
No deje objetos extraños dentro del equipo.
No permita el contacto de insecticidas, gasolina y diluyentes con el equipo.
Nunca desarme o modifique el equipo de ninguna manera.
ALVORENS TE GEBRUIKEN
Vermijd hoge temperaturen.
Zorg er bij installatie in een audiorack voor, dat de door het toestel geproduceerde warmte
goed kan worden afgevoerd.
Hanteer het netsnoer voorzichtig.
Houd het snoer bij de stekker vast wanneer deze moet worden aan- of losgekoppeld.
Laat geen vochtigheid, water of stof in het apparaat binnendringen.
Neem altijd het netsnoer uit het stopkontakt wanneer het apparaat gedurende een lange
periode niet wordt gebruikt.
De ventilatieopeningen mogen niet worden beblokkeerd.
Laat geen vreemde voorwerpen in dit apparaat vallen.
Voorkom dat insecticiden, benzeen of verfverdunner met dit toestel in contact komen.
Dit toestel mag niet gedemonteerd of aangepast worden.
OBSERVERA ANGÅENDE ANVÄNDNINGEN
Undvik höga temperaturer.
Se till att det finns möjlighet till god värmeavledning vid montering i ett rack.
Hantera nätkabeln varsamt.
Håll i kabeln när den kopplas från el-uttaget.
Utsätt inte apparaten för fukt, vatten och damm.
Koppla loss nätkabeln om apparaten inte kommer att användas i lång tid.
Täpp inte till ventilationsöppningarna.
Se till att främmande föremål inte tränger in i apparaten.
Se till att inte insektsmedel på spraybruk, bensen och thinner kommer i kontakt med
apparatens hölje.
Ta inte isär apparaten och försök inte bygga om den.
ENGLISHSVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANCAIS DEUTSCH ENGLISH
VI
A NOTE ABOUT RECYCLING:
This product’s packaging materials are recyclable and can be
reused. Please dispose of any materials in accordance with the
local recycling regulations.
When discarding the unit, comply with local rules or regulations.
Batteries should never be thrown away or incinerated but
disposed of in accordance with the local regulations concerning
battery disposal.
This product and the supplied accessories, excluding the
batteries, constitute the applicable product according to the
WEEE directive.
HINWEIS ZUM RECYCLING:
Das Verpackungsmaterial dieses Produktes ist zum Recyceln
geeignet und kann wieder verwendet werden. Bitte entsorgen
Sie alle Materialien entsprechend der örtlichen Recycling-
Vorschriften.
Beachten Sie bei der Entsorgung des Gerätes die örtlichen
Vorschriften und Bestimmungen.
Die Batterien dürfen nicht in den Hausmüll geworfen oder
verbrannt werden; bitte entsorgen Sie die Batterien gemäß der
örtlichen Vorschriften.
Dieses Produkt und das im Lieferumfang enthaltene Zubehör (mit
Ausnahme der Batterien!) entsprechen der WEEE-Direktive.
UNE REMARQUE CONCERNANT LE RECYCLAGE:
Les matériaux d’emballage de ce produit sont recyclables et peuvent être
réutilisés. Veuillez disposer des matériaux conformément aux lois sur le
recyclage en vigueur.
Lorsque vous mettez cet appareil au rebut, respectez les lois ou réglementations
en vigueur.
Les piles ne doivent jamais être jetées ou incinérées, mais mises au rebut
conformément aux lois en vigueur sur la mise au rebut des piles.
Ce produit et les accessoires inclus, à l’exception des piles, sont des produits
conformes à la directive DEEE.
NOTA RELATIVA AL RICICLAGGIO:
I materiali di imballaggio di questo prodotto sono riutilizzabili e riciclabili. Smaltire
i materiali conformemente alle normative locali sul riciclaggio.
Per lo smaltimento dell’unità, osservare le normative o le leggi locali in vigore.
Non gettare le batterie, incenerirle, ma smaltirle conformemente alla
normativa locale sui rifiuti chimici.
Questo prodotto e gli accessori inclusi nell’imballaggio sono applicabili alla direttiva
RAEE, ad eccezione delle batterie.
ACERCA DEL RECICLAJE:
Los materiales de embalaje de este producto son reciclables y se pueden volver
a utilizar. Disponga de estos materiales siguiendo los reglamentos de reciclaje
de su localidad.
Cuando se deshaga de la unidad, cumpla con las reglas o reglamentos locales.
Las pilas nunca deberán tirarse ni incinerarse. Deberá disponer de ellas siguiendo
los reglamentos de su localidad relacionados con los desperdicios químicos.
Este producto junto con los accesorios empaquetados es el producto aplicable a
la directiva RAEE excepto pilas.
EEN AANTEKENING MET BETREKKING TOT DE RECYCLING:
Het inpakmateriaal van dit product is recycleerbaar en kan opnieuw gebruikt
worden. Er wordt verzocht om zich van elk afvalmateriaal te ontdoen volgens de
plaatselijke voorschriften.
Volg voor het wegdoen van de speler de voorschriften voor de verwijdering van
wit- en bruingoed op.
Batterijen mogen nooit worden weggegooid of verbrand, maar moeten volgens
de plaatselijke voorschriften betreffende chemisch afval worden verwijderd.
Op dit product en de meegeleverde accessoires, m.u.v. de batterijen is de
richtlijn voor afgedankte elektrische en elektronische apparaten (WEEE) van
toepassing.
OBSERVERA ANGÅENDE ÅTERVINNING:
Produktens emballage är återvinningsbart och kan återanvändas. Kassera det
enligt lokala återvinningsbestämmelser.
När du kasserar enheten ska du göra det i överensstämmelse med lokala regler
och bestämmelser.
Batterier får absolut inte kastas i soporna eller brännas. Kassera dem enligt
lokala bestämmelser för kemiskt avfall.
Denna apparat och de tillbehör som levereras med den uppfyller gällande WEEE-
direktiv, med undantag av batterierna.
ENGLISHENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
VII
1. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in
this manual, meets R&TTE directive requirements. Modification of the
product could result in hazardous Radio and EMC radiation.
2. CAUTION
• Separation distance of at least 20 cm must be maintained between the
antenna of this product and all persons.
• This product and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
1. WICHTIGER HINWEIS: NEHMEN SIE KEINE VERÄNDERUNGEN AN
DIESEM PRODUKT VOR
Wenn dieses Produkt entsprechend dieser Bedienungsanleitung aufgebaut
wird, entspricht es den Anforderungen der R&TTE-Richtlinie. Veränderungen
am Produkt können zu gefährlicher Funk- und EMV-Strahlung führen.
2. VORSICHT
• Zwischen der Antenne dieses Produkts und Personen muss ein
Schutzabstand von 20 cm eingehalten werden.
• Dieses Produkt und seine Antenne dürfen nicht neben anderen Antennen
oder Sendern aufgestellt oder zusammen mit ihnen verwendet werden.
1. MISE EN GARDE IMPORTANTE : NE JAMAIS MODIFIER CE PRODUIT
Si toutes les consignes indiquées dans ce mode ont été respectées
pendant son installation, ce produit est conforme aux directives R&TTE.
Toute modification du produit risquerait alors de générer des radiations
radio et EMC dangereuses.
2. ATTENTION
• L’antenne de l’appareil devra être située à une distance de 20 cm au
moins des personnes.
• Ce produit ainsi que son antenne ne devront en aucun cas être utilisés à
proximité d’une autre antenne ou transmetteur.
1. AVVERTENZA IMPORTANTE: NON MODIFICARE QUESTO PRODOTTO
Se installato come indicato nelle istruzioni del presente manuale, questo
prodotto soddisfa i requisiti della direttiva R&TTE. Eventuali modifiche
apportate al prodotto potrebbero causare pericolose radiazioni radio ed
EMC.
2. ATTENZIONE
• È necessario mantenere una distanza minima di 20 cm tra l’antenna di
questo prodotto e le persone.
• Questo prodotto e la relativa antenna non devono essere posizionati in
prossimità di altre antenne o trasmettitori e non devono essere utilizzati
congiuntamente a questi ultimi.
1. NOTA IMPORTANTE: NO MODIFIQUE ESTE PRODUCTO
Este producto, si es instalado de acuerdo con las instrucciones contenidas
en este manual, cumple los requisitos de la directiva R&TTE. La modificación
del producto puede producir radiación de Radio y EMC peligrosa.
2. PRECAUCIÓN
• Se debe mantener una separación de al menos 20 cm entre la antena del
producto y las personas.
• Este producto y su antena no debe instalarse ni utilizarse conjuntamente
con otra antena o transmisor.
1. BELANGRIJKE MEDEDELING: BRENG AAN DIT PRODUCT GEEN
AANPASSINGEN AAN
Dit product, indien geïnstalleerd volgens de aanwijzingen in deze
gebruiksaanwijzing, voldoet aan de vereisten van de R&TTE-richtlijn.
Aanpassing van dit product kan gevaarlijke radio- en EMC-straling tot gevolg
hebben.
2. LET OP
• Houd tussen antenne en personen altijd een afstand van tenminste 20 cm
aan.
• Dit product en zijn antenne mogen niet in de buurt van een andere
antenne of zender worden geplaatst of in combinatie daarmee worden
gebruikt.
1. VIKTIGT: APPARATEN FÅR INTE MODIFIERAS
Under förutsättning att apparaten installeras enligt anvisningarna i denna
bruksanvisning, uppfyller denna kraven i R&TTE-direktivet. Ev. modifiering
av apparaten kan resultera i farlig radio- och elektromagnetisk strålning.
2. FÖRSIKTIGT
Se till att det finns ett avstånd minst 20 cm mellan apparatens antenn
och personer i omgivningen.
Apparaten och dess antenn får inte placeras eller användas i närheten av
andra antenner eller sändare.
ENGLISH
Getting Started
Accessories ········································································································2
Cautions on Handling ·······················································································2
Operations Enabled with the ASD-51W··························································2
About the Remote Control Unit ······································································3
Before Using ····································································································3
Inserting the Battery·························································································3
Operating Range of the Remote Control Unit ··················································3
Part Names and Functions ···············································································4
Top Panel / Front Panel / Side Panel ·································································4
Rear Panel ········································································································4
Remote Control Unit ························································································5
Connections
Mounting the universal adapter on the control dock····································5
Supported iPods/iPod compatibles ································································5
Connection to devices equipped with Dock Control ·····································6
Connecting to a Home Network (LAN) ···························································7
Settings
GUI Menu Map ··································································································9
GUI Menu Operations ·······················································································9
Example of the Display of the GUI Mark at a Title············································9
Examples of GUI Screen Displays ·································································· 10
Making Detailed Settings (Setup) ································································· 11
Contentsn
Playback
iPod
®
Playback ·······························································································19
Preparations ···································································································19
Playback Music and Video ··············································································19
Viewing Still Pictures on the iPod ···································································20
Playing Network Audio ··················································································20
About the Internet Radio Function ·································································20
Listening to Internet Radio ·············································································22
Registering Internet Radio Stations as Your Favorites ····································22
Playing Files Stored on a Computer ·······························································23
Listening to Napster ·······················································································24
Listening to Rhapsody (for North America model only) ··································26
Convenient Functions ·····················································································28
Operating a Wireless LAN-Compatible Mobile Terminal to Play Music ··········28
Playing the Same Network Audio on Different Devices Connected in a
Network (Party Mode Function) ·····································································30
Operating the ASD-51W with a Browser (Web Control Function) ··················31
Other Information
About Networks ······························································································32
Windows Media Player Ver.11 ········································································32
vTuner ·············································································································32
DLNA ··············································································································32
Windows Media DRM ····················································································32
About Wireless LAN ·······················································································32
Troubleshooting ····················································································34
Restart and Reset Operations ········································································37
Specifications ··························································································38
ENGLISH
Connections Setting Playback Information Troubleshooting Specifications
Check that the following parts are supplied with the
product.
q Owner’s manual ...............................................1
w “WPS” Wi-Fi Setup Guide ............................... 1
e Warranty (for North America model only) ........1
r Service station list ........................................... 1
t AC Adapter (KSAFC0600150W1UV–1) ............. 1
y Remote control (RC-1137) ................................1
u AV/Control Cable
(Cable length: Approx. 6.6 ft / 2 m) ..................
1
i Rod antenna for wireless LAN connection ......1
Thank you for purchasing this DENON product. To
ensure proper operation, please read these owner’s
manual carefully before using the product.
After reading them, be sure to keep them for future
reference.
Getting Started
Accessories
t
y
u i
NOTE
• Do not use any AC adapter other than the specified
one. Doing so could result in fires or electric shock.
• The included AC adapter is exclusively for use with
this unit. Never use it with other equipment.
(For U.S.A. & Canada model) (For Europe model)
Cautions on Handling
Before turning the power switch on
Check once again that all connections are correct
and that there are no problems with the connection
cables.
Power is supplied to some of the circuitry even when
the unit is set to the standby mode. When traveling
or leaving home for long periods of time, be sure to
unplug the power cord from the power outlet.
Cautions on using mobile phones
Using a mobile phone near this unit may result in
noise. If so, move the mobile phone away from this
unit when using it.
Moving the unit
Turn off the power and unplug the power cord from
the power outlet. Next, disconnect the connection
cables to other system units before moving the
unit.
Note that the illustrations in these instructions may
differ from the actual unit for explanation purposes.
With battery
Operations Enabled with
the ASD-51W
Play iPod Audio and Video vpage 19
Listen to Internet Radio vpage 22
Play Audio Files stored on a PC
(Media Server) vpage 23
Play Music from Fee-based Music
Sites
Napster vpage 24
Rhapsody vpage 26
(for North America model only)
n
n
Party Mode Function vpage 30
If you use a compatible DENON network
product, you can play music simultaneously
on up to 5 devices.
Web Control Function
(iPod touch only) vpage 31
Using the browser software on an iPod
touch, you can operate the ASD-51W via
the network.
Operation Using a Mobile device
vpage 28
You can play music by operating a wireless
LAN-compatible mobile device.
WPS Setup vpage 13, 14
The WPS function makes it easy to connect
to wireless LAN.
Getting Started
ENGLISH
Connections Setting Playback Information Troubleshooting
Specifications
30°
30°
Approx. 7 m
Point the remote control unit at the remote sensor
when operating it.
NOTE
The set may function improperly or the remote control
unit may not operate if the remote control sensor is
exposed to direct sunlight, strong artificial light from
an inverter type fluorescent lamp or infrared light.
Operating Range of the Remote
Control Unit
NOTE
Replace the battery with new ones if the set does
not operate even when the remote control unit is
operated close to the unit.
The supplied battery are only for verifying operation.
When inserting the battery, be sure to do so in the
proper direction, following the “qand “wmarks
in the battery compartment.
To prevent damage or leakage of battery fluid:
Do not short-circuit, disassemble, heat or dispose of
battery in flames.
If the battery fluid should leak, carefully wipe the
fluid off the inside of the battery compartment and
insert new battery.
Remove the battery from the remote control unit if it
will not be in use for long periods.
When replacing the battery, have the new battery
ready and insert them as quickly as possible.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
q Remove the rear lid.
e Put the rear lid back on.
w Load the battery
properly as indicated
by the marks in the
battery compartment.
Inserting the Battery
CR2025
About the Remote Control Unit
Before Using
Remove the insulating sheet before using the remote
control unit.
Insulating sheet
Getting Started
ENGLISH
Connections Setting Playback Information Troubleshooting Specifications
For buttons not explained here, see the page indicated in parentheses ( ).
Part Names and Functions
Top Panel / Front Panel / Side Panel Rear Panel
q
w
e
r t y
q
w
e r
yt
u
i
q Remote control unit storage slot
w Dock connector
e Universal adapter slot ············· (5)
r POWER indicator
After inserting the AC adapter plug
into the wall socket, turn the power
operation switch on the side panel
to “ON/STANDBY” to power up the
ASD-51W. This indicator then lights
up.
When the GUI and audio output
stops the display is extinguished.
t Remote Control sensor ··········· (3)
y PARTY mode indicator··········· (30)
u Power operation switch ·········· (6)
q DC IN connector ······················· (6)
w ETHERNET connector ·············· (7)
e DOCK CONTROL jack
···················································
(6)
r REMOTE CONTROL jack ·········· (6)
t Digital audio output connector
(DIGITAL OUT) ························· (6)
y Analog audio output connectors
(AUDIO OUT) ···························· (6)
u S-VIDEO output connector ····· (6)
i Wireless antenna terminal ······ (7)
u
NOTE
It is not possible to output audio
simultaneously from the digital audio
output connector t and analog audio
output connectors y.
The default setting is for audio to be
output from the analog audio output
connectors y.
When outputting audio from the digital
audio output connector t, switch the
setting to “Digital” in the GUI menu
“Setup” – “Audio Output” (vpage
18 ).
Getting Started
ENGLISH
Setting Playback Information Troubleshooting Specifications
Remote Control Unit
q
Q1
Q2
Q3
Q4
Q5
Q6
Q7
Q8
w
e
r
t
y
u
i
o
Q0
t Cursor buttons (uio p)
y PARTY mode button ·············· (30)
When pressed, “Enter Party
Mode?” is displayed.
u RANDOM button
i MEMORY button
o MUTE button
Turning off the sound temporarily.
Q0 VOLUME control buttons
Use this to adjust the volume.
Q1 POWER button
When this button is pressed, the
GUI and audio outputs are stopped.
Even when stopped (POWER
indicator extinguished) the iPod is
charged.
Q2 CHARACTER SEARCH button
(9) ································· (23, 24)
Q3 Play/Pause button (1/3)
Q4 FAVORITES button ················· (23)
When pressed, the favorites folder
appears on the monitor.
Q5 ENTER button······················(9, 19)
Q6 iPod menu button
When pressed, the iPod menu
appears on the monitor.
Q7 PAGE buttons (ui)
Q8 REPEAT button
b: ALL MUSIC functions are not
executed by this unit.
q
Remote control
signal transmitter
····················· (3)
w iPod mode select button
(BROWSE/REMOTE) ·············· (20)
e CHARACTER SEARCH button
(8) ································· (23, 24)
r TOP MENU button ··················· (9)
When pressed, the GUI’s top menu
appears on the monitor.
When pressed and held for 3
seconds, the display switches to
the WPS setup screen.
Part Names and Functions
Connections
Mounting the universal adapter on the
control dock
A genuine iPod dock adapter can be mounted on this ASD-51W.
To connect an iPod, use the dock adapter included with the iPod.
Adapter
Main unit
b
Supported iPods/iPod compatibles
The ASD-51W supports any iPod equipped with a Dock connector (except the 3rd
and 4th generation, iPod mini and iPod Photo).
For latest compatible lists, please visit.
http://denon.com/asd-51/
Getting Started Connections
ENGLISH
Getting Started Setting Playback Information Troubleshooting Specifications
Connection to devices equipped with Dock Control
Monitor
Device equipped with DOCK CONTROL jack
b4
AC 120 V, 60 Hz
(For U.S.A. &
Canada model)
AC 230 V, 50 Hz
(For Europe model)
AC outlet (wall)
or
b1
b1: After inserting the AC adapter plug into the wall
socket, turn the power operation switch on the
side panel to ON/STANDBY” to power up the
ASD-51W. The power indicator then lights up, and
after 15-20 seconds the GUI screen is displayed
on the monitor.
b2: Digital connection is possible using a commercially
available coaxial digital cable. When using the
digital output, you will need to perform settings
in the GUI menu “Setup” – Other” Audio
Output” (vpage 18). The default setting is
“Analog”. Digital output is turned off.
NOTE
When making a digital connection to a DENON
amplifier released in 2009 or earlier, you should
not use the DOCK CONTROL jack.
b3: Please use a commercially available monaural
mini-plug cable for the connection. Connect to
equipment that has a REMOTE CONTROL jack.
The ASD-51W receives remote control signals
from the connected equipment, and these signals
are sent to the equipment to operate it.
b4: ASD-51W can be operated from a DENON
amplifier or DENON system device equipped with
a DOCK CONTROL jack connected to the ASD-
51W.
Features may be limited, depending on the device
connected.
NOTE
When using the DOCK CONTROL jack, be sure to
make an analog connection.
Latest compatible lists
http://denon.com/asd-51/
NOTE
Connect the plug on the side
to which this part is mounted
to the terminal on the ASD-
51W.
The ASD-51W can be operated remotely using the supplied remote control. By connecting to your existing
equipment, you can play back your favourite music and video files from your iPod or from over a network.
b3b2
(supplied)
(sold separately)
(sold separately)
(supplied)
Connections
NOTE
When the DOCK CONTROL jack is connected,
the ASD-51W no longer accepts remote control
commands. To use the remote control unit, point it at
the remote control sensor on the connected device
when operating it.
Only connect equipment which is compatible with
the DOCK CONTROL jack to the DOCK CONTROL
jack of the ASD-51W. Connecting non-compatible
equipment will result in a malfunction.
Signal
direction
Audio signal
OUT
IN
Video signal
OUT
IN
ENGLISH
Getting Started Setting Playback Information Troubleshooting Specifications
[Wired LAN]
To WAN side
Internet
Router
Computer
LAN port/
Ethernet
connector
Modem
To LAN port
To LAN port
[Wireless LAN]
Computer
To WAN side
Internet
Modem
Router with
access point
Turn clockwise.
Rod antenna
(supplied)
NOTE
It is not possible to use both a wired and wireless LAN at the same time.
If a wired LAN is connected when the power to the ASD-51W is turned on, it
automatically uses wired LAN mode.
If a wired LAN is not connected when the power to the ASD-51W is turned on,
it automatically uses wireless LAN mode.
Connecting to a Home Network (LAN)
When you connect the ASD-51W to a home network, you can enjoy listening to music files stored on your PC, internet radio audio and other sources. You can also
control the ASD-51W from your iPod touch via the Web browser.
Connections
ENGLISH
Getting Started Setting Playback Information Troubleshooting Specifications
Required system
n Broadband Internet connection
A broadband line connection to the Internet is
required in order to use the ASD-51W’s Internet
radio function and firmware update.
n Modem
This is a device that is connected to the broadband
line to communicate with the Internet. Some are
integrated with the router.
n Router
• When using the ASD-51W, we recommend you use
a router equipped with the following functions:
· Built-in DHCP (Dynamic Host Configuration
Protocol) server
This function automatically assigns IP addresses
on the LAN.
· Built-in 100BASE-TX switch
When connecting multiple devices, we
recommend a switching hub with a speed of 100
Mbps or greater.
• When using with a wireless LAN, prepare a
broadband router with built-in access point.
n Ethernet cable
(CAT-5 or greater recommended)
Use for wired LAN.
• The ASD-51W does not come with an Ethernet
cable.
• For Ethernet cable, we recommend that you use
shielded normal type cable. If you use flat type or a
non-shielded cable, the noise may adversely affect
other devices.
n Computer
A computer with the following specifications is
required to use a music server:
• OS
Windows
®
XP Service Pack2 or later, Windows
Vista
• Software
(Prepare one of the following.)
· Windows Media Player ver.11
· DLNA-compatible server software
• Internet browser
Microsoft Internet Explorer 6 or later
• LAN port
• 300 MB or more free disk space
b Free disk space is required to store music and
video files. The following sizes are approximate.
Format
Bit
rate
Per
minute
Per
hour
MP3 /
WMA
MPEG-4
AAC
128
kbps
Approx.
1 MB
Approx.
60 MB
192
kbps
Approx.
1.5 MB
Approx.
90 MB
256
kbps
Approx.
2 MB
Approx.
120 MB
392
kbps
Approx.
3 MB
Approx.
180 MB
WAV
(LPCM)
1400
kbps
Approx.
10 MB
Approx.
600 MB
FLAC
1080
kbps
Approx.
7.7 MB
Approx.
464 MB
For connections to the Internet, contact an ISP
(Internet Service Provider) or a computer shop.
NOTE
A contract with an ISP is required to connect to the
Internet.
No additional contract is needed if you already have
a broadband connection to the Internet.
The types of routers that can be used depend on the
ISP. Contact an ISP or a computer shop for details.
Depending on the server, video files may be
displayed, but they cannot be played on the ASD-
51W.
n Others
• If you have an Internet provider contract for a line on
which network settings are made manually, make
the settings at GUI menu “Setup” “Network”
“Network Setup” (vpage 11).
• With the ASD-51W, it is possible to use the DHCP
and Auto IP functions to make the network settings
automatically.
• When using a broadband router (DHCP function),
the ASD-51W sets the IP address, etc.,
automatically.
When using the ASD-51W connected to a network
with no DHCP function, make the settings for the
IP address, etc., at GUI menu “Setup” “Network”
“Network Setup” (vpage 11).
• The ASD-51W is not compatible with PPPoE. A
PPPoE-compatible router is required if you have
a contract for a line of the type with which the
PPPoE is set.
• Depending on the ISP with which you have your
contract, it may be necessary to make proxy
server settings to use the Internet radio function.
If you made proxy server settings on the computer
to connect to the Internet, make the proxy server
settings on the ASD-51W in the same way.
Connecting to a Home Network (LAN)
Connections
ENGLISH
Getting Started Connections Playback Information Troubleshooting Specifications
With the ASD-51W, settings and operations for most functions can be performed
by operating while looking at the GUI menus displayed on the monitor screen.
Settings
GUI Menu Map
iPod
(vpage 19)
n Music
n Video
Network
(vpage 20
n Favorites
n Internet Radio
n Media Server
n Napster
n Rhapsody
Setup
(vpage 11)
n Network (vpage 11)
Network Setup
Network Info
n Language
(vpage 15)
n GUI (vpage 16)
Screensaver
Format
GUI Timeout
n Other (vpage 16)
Slide Show
Interval
Repeat
Random
Friendly Name Edit
Party Mode Function
Party Start Level
Firmware Update
Rhapsody Account
Napster Account
Update Notification
Audio Output
GUI Menu Operations
1
Press TOP MENU.
The GUI menu is displayed on the monitor
screen.
2
Press ui to select the menu to
be set or operated.
To return to the previous item, press o.b
3
Press ENTER or p to enter the
setting.
uiop
ENTER
TOP MENU
Exiting the GUI Menu
Press TOP MENU while the GUI menu is displayed.
The GUI menu display disappears.
n
This is the GUI icon for this setting item or for
the menu series to which this item belongs.
Making Detailed Settings
(Setup)
Items for which this mark is indicated at the title can be
operated from the GUI.
We recommend performing such operations from the GUI.
Example of the Display of the GUI Mark at a Title
Setting
ENGLISH
0
Getting Started Connections Playback Information Troubleshooting Specifications
n Icon
n List
DENON:[ASD-51W]
[1/5]
Favorites
Internet Radio
Media Server
Napster
Rhapsody
Switch the selected item
Selected item
Switch the
selected item
Selected item
b Switch the selected item using ui.
b By using the PAGE ui button, the list page may be sent /
returned.
Switch to the next item
Switch to the next item
Some typical examples are described below.
Examples of GUI Screen Displays
Example: Browse Menu (Top Menu)
Press i to select
and then press p (or press
ENTER.).
z1 : List GUI menu setup icons
z2 : Currently selected setup icon
z3 : Currently selected setup item
z4 : List of currently selected setup items
z5 : Operation button guidance
iPod
Music
Video
Up/Down Select
z3
z4
z2
z1
DENON:[ASD-51W]
[1/5]
Favorites
Internet Radio
Media Server
Napster
Rhapsody
z6
z7
z6 : Selected setup icon
z7 : Options of the selected setup item
GUI Menu Operations
z5
(Use i to switch.)
(Use u to switch.)
(Use p or ENTER to switch.)
Setting
ENGLISH

Getting Started Connections Playback Information Troubleshooting Specifications
Making Detailed Settings (Setup)
For details on how to select, set and cancel settings for each menu, see “GUI
Menu Operation” (vpage 9, 10).
Setting items Setting contents
Network Setup
(Continued)
If you are using a
broadband router
(DHCP function),
there is no need to
make the settings
at “IP Address”
and “Proxy”, since
the DHCP function
is set to “ON” in
the ASD-51W’s
default settings.
If the ASD-51W
is being used
connected to a
network without
the DHCP function,
the network
settings must be
made. In this case,
some knowledge
of networks is
required. For
details, consult
a network
administrator.
Network Setup
Up/Down Back/Select
IP Address
DHCP
192.168.11.3
ON
Exit
Detail
Detail
Up/Down Back/Select
IP Address
DHCP
192.168.011.003
OFF
Subnet Mask 255.255.255.0.
Default Gateway 000.000.000.000
Primary DNS 000.000.000.000
000.000.000.000Secondary DNS
Proxy
q Select “Detail” and press ENTER.
w Use p to set “DHCP” to “OFF”, then press i.
The DHCP function is disabled.
e Use uio p to input the address and press ENTER.
IP Address : Set the IP address within the ranges
shown below. The Network Audio function cannot be
used if other IP addresses are set.
CLASS A : 10.0.0.0 ~ 10.255.255.255
CLASS B : 172.16.0.0 ~ 172.31.255.255
CLASS C : 192.168.0.0 ~ 192.168.255.255
Subnet Mask : When connecting an xDSL modem or
terminal adapter directly to the ASD-51W, input the
subnet mask indicated in the documentation supplied
by your provider. Normally input 255.255.255.0.
Default Gateway : When connected to a gateway
(router), input its IP address.
Make network settings.
Setting items Setting contents
Network Setup
Make settings for
wired or wireless
LAN.
Wired LAN settingsn
1. Connect the LAN cable (vpage 7).
2. Turn on the ASD-51W (vpage 4, 6 b1 ).
ASD-51W performs automatic network setup due to
the DHCP function.
When connecting to a network that has no DHCP
function, perform the setting in step 3.
3. Set the IP address at the GUI menu “Setup”
– “Network”“Network Setup”.
Making Detailed Settings (Setup)
See overleaf
DHCP (Dynamic Host Configuration Protocol)
These are systems by which the IP address and other network settings are
automatically set for the ASD-51W, computer, broadband router and network
devices.
q
w
e
Making the Network Settings
(Network)
Default settings are underlined.
Items that can be set with the “Setup” proceduren
Making the GUI settings
(GUI) vpage 16
Making other settings
(Other) vpage 16
Making language settings
(Language) vpage 15
Making the network
settings (Network)
Wired LAN settings
v
page 11
Wireless LAN settings
Automatic settings
v
page 13
WPS settings
v
page 14
Manual settings
v
page 15
n
n
Setting
ENGLISH

Getting Started Connections Playback Information Troubleshooting Specifications
Setting items Setting contents
Network Setup
(Continued)
Primary DNS / Secondary DNS : If there is only one
DNS address indicated in the documentation supplied
by your provider, input it at “Primary DNS”. If there are
two or more DNS addresses, input the first one at
“Secondary DNS”.
r Use i to select “Exit” and press ENTER.
Setup is complete.
When connecting to the network via a Proxy server,
select “Proxy” and press ENTER (vpage 12 “Proxy
settings”).
If you cannot connect to the Internet, recheck the
connections and settings (vpage 7).
If you do not understand about Internet connection,
contact your ISP (Internet Service Provider) or the store
from which you purchased your computer.
When you want to cancel the setting during IP address
input, press o.
DNS (Domain Name System)
This is a system for converting the domain names used
when browsing Internet sites (for example, “www.
denon.jp”) into the IP addresses actually used for
communications (for example, “202.221.192.106”).
b
Proxy settings : Make this setting when connecting
to the Internet via a proxy server.
n
Making Detailed Settings (Setup)
Setting items Setting contents
Network Setup
(Continued)
Network Setup
Up/Down Back/Select
IP Address
DHCP
192.168.11.3
ON
Exit
Detail
Detail
Up/Down Back/Se lect
Proxy
DHCP
Exit
ON
q On the GUI menu, select “Setup” “Network”
– “Network Setup” – “Detail” and press ENTER.
w Use ui to set “Proxy” and press ENTER.
e Use p to set “Proxy” to “ON” and press i.
The proxy server is enabled.
r Use p to select “Proxy” (input method), and then
press i.
Address : Select when inputting by address.
Name : Select when inputting by domain name.
t Use uio p to input the proxy server address or
domain name and press ENTER.
When “Address” is selected in step r : Input the
address.
When “Name” is selected in step r : Input the
domain name.
The types of characters that can be input are as shown
below.
GLower case charactersH a ~ z
GUpper case charactersH A ~ Z
GSymbolsH ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [
\ ] _ (Space)
GNumbersH 0 ~ 9
q
w
Setting
ENGLISH

Getting Started Connections Playback Information Troubleshooting Specifications
Making Detailed Settings (Setup)
Setting items Setting contents
Network Setup
(Continued)
y Use uio p to input the proxy server port number
and press ENTER.
u Use i to select “Exit” and press ENTER.
Setup is complete.
When searching
access points
to connect
automatically, refer to
Automatic settings”.
When searching
access points to
connect manually,
refer to “Manual
settings”.
If the device is
connected to a router
with a WPS function,
please refer to “WPS
settings”.
Wireless LAN settingsn
1. Fitting a rod antenna (vpage 7).
If a LAN cable is connected, remove it.
2. Turn on the ASD-51W (vpage 4, 6 b1 ).
3. Set the access point at the GUI menu “Setup”
– “Network” – “Network Setup”.
b
Automatic settings
Network Setup
Up/Down Back/Select
WPS
Search
Manual
Search
Up/Down Back/Se lect
SSID_2
Search
SSID_3
SSID_4
SSID_5
75%
90%
50%
30%
10%
WEP
WEP
WEP
None
None
SSID_1
q Select “Search” and press ENTER.
The access point you have set is displayed.
If your preferred access point is not found, repeat
step q.
b
Setting items Setting contents
Network Setup
(Continued)
w Use ui to select the access point, and then press
ENTER.
If the access point is not detected automatically,
use the “Manual settings” procedure (vpage
15).
If the access points are repeat search, use i to
select the “Search” and press ENTER.
e If there is an encryption setting for the access point
you selected in step w, enter same encryption key
as used for the access point. (If there is no encryption
setting, proceed to step r.
Use uio p to input the “Key” (encryption key) and
press ENTER. Enter the same encryption key as used
for the access point.
The types of characters that can be input are as shown
below.
GLower case charactersH a ~ z
GUpper case charactersH A ~ Z
GSymbolsH ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [
\ ] _ (Space)
GNumbersH 0 ~ 9
When no security settings have been used in
the Internet connection settings, this step is not
necessary.
When connecting to a “WEP” encrypted network,
set the access point “Default Key” to “1”.
r Use i to select “Connection” and press ENTER.
Network connection starts.
ASD-51W performs automatic network setup due to
the DHCP function.
When connecting to a network that has no DHCP
function, perform the setting in step 4.
4. Set the IP address
(vpage 11 “Wired LAN settings”
– step 3 – e).
b
b
b
b
b
See overleaf
q
w
Setting
ENGLISH

Getting Started Connections Playback Information Troubleshooting Specifications
Making Detailed Settings (Setup)
Setting items Setting contents
Network Setup
(Continued)
If you press and hold
TOP MENU for 3
seconds while any
of the GUI screens is
displayed, the screen
switches to the WPS
setup GUI screen.
NOTE
Please use a router
that has a WPS
function.
WPS settings (Push-button method)
Network Setup
Up/Down Back/Select
WPS
Search
Manual
WPS
Up/Down Back/Select
PIN Code
Push Button
Yes
No
Start Connection?
q Select “WPS” and press ENTER.
w Select “Push Button” and press ENTER.
“Start Connection?” is displayed.
e Use o p to select “Yes” and press ENTER.
“Please press the “WPS” button of target access
point” is displayed.
r Press the “WPS” button on the router.
When connection is established with access point,
“Connection completed” is displayed.
Setting items Setting contents
Network Setup
(Continued)
WPS settings (PIN code method)
WPS
Up/Down Back/Select
PIN Code
Push Button
PIN Code
Up/Down Back/Select
SSID_2
SSID_1
SSID_3
SSID_4
SSID_5
PIN Code
PIN Code
Please set the PIN code to the registrar
12345678
Back
q Select “WPS” and press ENTER.
w Select “PIN Code” and press ENTER.
The access point you have set is displayed.
e Use ui to select the access point and press
ENTER.
PIN code number is displayed.
r Set this PIN code to the registrar.
When connection is established with access point,
“Connection completed” is displayed.
Setting
q
w
e
e
w
r
ENGLISH

Getting Started Connections Playback Information Troubleshooting Specifications
Making Detailed Settings (Setup)
Setting items Setting contents
Network Setup
(Continued)
If you are using
a router with no
DHCP function to
automatically assign
the IP address,
set the IP address
manually.
Manual settings
Network Setup
Up/Down Back/Select
WPS
Search
Maunal
Manual
Up/Down Back/Select
Security
SSID
WEP Key
WEP
SSID_1
AAAAA
Connection
q Select “Manual” and press ENTER.
w Use uio p to input the name of the wireless
network (SSID) and press ENTER.
The types of characters that can be input are as shown
below.
GLower case charactersH a ~ z
GUpper case charactersH A ~ Z
GSymbolsH ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [
\ ] _ (Space)
GNumbersH 0 ~ 9
e Use ui to select “Security” and press p.
None : Select if not encrypted. Can also be used
even without encryption, through we recommend
encryption for improved security.
WEP / WPA(TKIP) / WPA(AES) / WPA2(TKIP) /
WPA2(AES) : Select the encryption method according
to the encryption setting of the access point you are
using.
Setting items Setting contents
Network Setup
(Continued)
r Use uio p to input the “Key” (encryption key) and
press ENTER.
Enter the same encryption key as used for the access
point.
When no security settings have been used in
the Internet connection settings, this step is not
necessary.
When connecting to a “WEP” encrypted network,
set the access point “Default Key” to “1”.
t Use i to select “Connection” and press ENTER.
Network connection starts.
ASD-51W performs automatic network setup due
to the DHCP function.
When connecting to a network that has no DHCP
function, perform the setting in step 4.
4. Set the IP address
(vpage 11 “Wired LAN settings”
– step 3 – e).
b
b
b
Network Info
Display network
information.
SSID / DHCP= ON/OFF / IP Address / MAC Address
q
Set the language for display on the GUI screen.
Setting contents
English / Français / Deutsch / Español /
Making Language Settings
(Language)
Default settings are underlined.
Setting
w
e
r
t
ENGLISH

Getting Started Connections Playback Information Troubleshooting Specifications
Making Detailed Settings (Setup)
Setting items Setting contents
Screensaver
Make screensaver
settings.
Use the screensaver
to prevent burn-in on
the monitor screen.
ON : When set to “ON”, the screensaver is activated if
there is no activity for about 3 minutes.
OFF : Screen saver is not activated.
Format
Select the video
output signal
format to match the
monitor.
NTSC : Select NTSC output.
PAL : Select PAL output.
b Normally there is no need to set this.
NOTE
When a format other than the video format of the
connected monitor is set, the picture will not be displayed
properly. Use the procedure described below to change
the video format.
• Set to NTSC
Press and hold
TOP MENU and PAGEu for at least 3
seconds.
“NTSC” is set.
• Set to PAL
Press and hold
TOP MENU and PAGEi for at least 3
seconds.
“PAL” is set.
GUI Timeout
Set the GUI display
time when not
operating.
Always : Show display continuously.
10s : Show display for 10 seconds after operation.
30s : Show display for 30 seconds after operation.
Make GUI related settings.
Making the GUI settings (GUI)
Default settings are underlined.
Setting items Setting contents
Slide Show
Make slideshow
settings.
OFF : Display only the selected still picture image.
ON : Display still picture images in a slide show.
Interval
Set the playback
time per image.
5s / 10s / 15s / 20s / 30s / 40s / 60s
Repeat
Make settings for
repeat mode.
OFF : Disable repeat playback.
ALL : Repeat all songs.
ONE : Repeat the current song.
Random
Make settings for
shuffle mode.
OFF : Disable random playback.
Songs : Select songs random.
Albums : Select albums random.
b With network audio, only the Songs Random mode
works.
Friendly Name Edit
The Friendly Name is
the name ASD-51W
displayed on the
network.
Edit : Up to 63 characters can be input. The default
Friendly Name on first use is “DENON:[ASD-51W]”.
The types of characters that can be input are as shown
below.
GLower case charactersH a ~ z
GUpper case charactersH A ~ Z
GSymbolsH ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [
\ ] _ (Space)
GNumbersH 0 ~ 9
Default : Reset all settings to factory default.
Making other settings (Other)
Default settings are underlined.
Make various other settings.
Setting
ENGLISH

Getting Started Connections Playback Information Troubleshooting Specifications
Setting items Setting contents
Party Mode
Function
Set the Party Mode
function.
ON : Enable Party Mode function.
OFF : Disable Party Mode function.
Refer to page 30, “Playing the Same Network
Audio on Different Devices Connected in a Network
(Party Mode Function)” for more information on the party
mode function.
Party Start Level
Make settings for
volume level when
the Party Mode is
started.
Volume Level
0 ~ 100 % : Start party mode with your preferred volume.
This can be set when “Party Mode Function“ is set
to “ON“.
Firmware Update
Update the firmware.
Check for Update : You can update to the latest firmware
by connecting the ASD-51W to a network.
It is recommended that you update to the latest firmware
version when using the ASD-51W.
NOTE
When you update the firmware your settings will be
returned to the default values. Please be aware that
updating the firmware will erase all your settings,
including the stations registered in your Favourites
and your Recently Played list.
GHow to update the firmwareH
1. Connect the monitor and connect to the network.
(
vpage 6)
2. Turn on the ASD-51W (vpage 4, 6 b1 ).
3. Configure the network connection settings.
(
vpage 7)
Making Detailed Settings (Setup)
Setting items Setting contents
Firmware Update
(Continued)
4. While watching the GUI screen, use uio p to
select “Setup”Other”“Firmware Update.
When the language setting is “English”.
5. Select “Start” and press ENTER.
When you press ENTER, firmware updating starts
automatically.
The message “Now Updating. During this process
screen will go blank for several minutes. Do not turn
off.” will appear briefly, after which the GUI screen
will go blank.
During firmware updating, the power indicator is
turned off and the GUI screen is blank.
The updating process takes approx. 10 ~ 15 minutes
with a broadband connection. The actual time will vary
depending on the server status and the speed of the
Internet.
When updating is complete, the GUI screen reappears
automatically.
Set the power operation switch on the ASD-51W to
OFF”. Firmware updating is now complete.
NOTE
Step 5 cannot take place if the ASD-51W does not
connect to the Internet. In this case, repeat the procedure
from step 2.
If your ASD-51W already has the latest firmware
version, the message “Latest Firmware” will appear
at step 5. In this case, you do not need to update the
firmware.
b
Setting
ENGLISH

Getting Started Connections Playback Information Troubleshooting Specifications
Making Detailed Settings (Setup)
Setting items Setting contents
Rhapsody Account
Set or change
Username and
Password (vpage
26 “Listening to
Rhapsody“ (for
North America model
only)).
Username / Password
The types of characters that can be input are as shown
below.
GLower case charactersH a ~ z
GUpper case charactersH A ~ Z
GSymbolsH ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [
\ ] _ (Space)
GNumbersH 0 ~ 9
The password may not contain underscores ( _ ).
Clear : Delete the entered username and password.
Napster Account
Set or change
Username and
Password (vpage
24 “Listening to
Napster“).
Username / Password
The types of characters that can be input are as shown
below.
GLower case charactersH a ~ z
GUpper case charactersH A ~ Z
GSymbolsH ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [
\ ] _ (Space)
GNumbersH 0 ~ 9
The password may not contain underscores ( _ ).
Clear : Delete the entered username and password.
Setting items Setting contents
Update Notification
Displays a notification
message on the
ASD-51W’s GUI
screen when the
latest firmware
is released with
“Firmware Update”.
The notification
message is displayed
for about 20 seconds
when the power is
turned on. Connect
to broadband Internet
(vpage 7) when
using this function.
ON : Display update message.
OFF : Do not display update message.
When you press ENTER during display of the notification
message, the “Check for Update” screen is displayed.
(Refer to page 17 for more information on “Firmware
Update”.)
Press RETURN (on the GUI screen) to erase the
notification message.
Audio Output
Switch the audio
output on the ASD-
51W.
Analog : Output audio from the analog audio output
connectors.
Digital : Output audio from the digital audio output
connector.
When “Audio Output” is set to “Digital”, the remote
control’s VOLUME and MUTE buttons do not operate.
Setting
ENGLISH

Getting Started Connections Setting Information Troubleshooting
Specifications
“Made for iPod” means that an electronic accessory
has been designed to connect specifically to iPod and
has been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this
device or its compliance with safety and regulatory
standards.
iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
b The iPod may only be used to copy or play conten
ts that are not copyrighted or contents for which
copying or playback is legally permitted for your
private use as an individual. Be sure to comply with
applicable copyright legislation.
Load the iPod onto the ASD-51W.
q Set the iPod in the ASD-51W.
(iPod screen)
b If the screens above are not displayed, the iPod
may not be properly connected. Try connecting
again.
Attached to accessory.
3
Press ENTER, p or 1/3
Playback starts.
NOTE
• Depending on the type of iPod and the software
version, some functions may not operate.
• DENON will accept no responsibility whatsoever for
any loss of iPod data.
Stopping playback temporarily
During playback, press ENTER or 1/3.
Press again to resume playback.
Fast-forwarding or fast-reversing
During playback, either press and hold 8 or 9.
To cue to the beginning of a track
During playback, either press u (to cue to the previous
track) or i (to cue to the next track), or press 8 or
9.
To stop
During playback, either press and hold ENTER.
Playing repeatedly
Press REPEAT to switch the repeat mode.
All track repeat
OFF
Single track repeat
:
”Setup” “Other” “Repeat”
(vpage 16)
“TV Out” at the iPod’s “Slideshow Settings”
or “Video Settings” must be set to “ON” in order to
display the iPod’s photo data or videos on the monitor.
For details, see the iPod’s operating instructions.
n
n
n
n
n
ui p
9
ENTER
8
1/3
REPEAT
Playback
iPod
®
Playback
Preparations
1
Use ui to select “iPod”, then press
ENTER or p.
2
Use u i to select the menu, then
press ENTER or p to select the music
or video le to be played.
Playback Music and Video
See overleaf
Playback
ENGLISH
0
Getting Started Connections Setting Information Troubleshooting Specifications
“TV Out” at the iPod’s “Slideshow Settings”
or “Video Settings” must be set to “ON” in order to
display the iPod’s photo data or videos on the monitor.
For details, see the iPod’s operating instructions.
1
Press and hold BROWSE/REMOTE to
set the Remote mode.
2
Use u i to select the menu, then
press ENTER or p to select the le to
be played.
3
Press ENTER, p or 1/3 until the
image you want to view is displayed.
Viewing Still Pictures on the
iPod
Playing Network Audio
Photo data on the iPod can be viewed on the monitor.
Media Player
This function lets you play music files and playlists
(m3u, wpl) stored on a computer (Media server)
connected to the ASD-51W via a network.
With the ASD-51W’s network audio playback function,
connection to the server is possible using one of the
technologies below.
Windows Media Player Network Sharing Service
Windows Media DRM10
Remote mode
This mode is for operating the iPod directly while
watching the information displayed on the iPod’s
screen.
In this mode, the GUI operation guide is not displayed
on the monitor.
n
iPod
®
Playback
uiop
8, 1/3, 9
ENTER
BROWSE/
REMOTE
RANDOM
REPEAT
Shuffling playback
Press RANDOM to switch the shufe mode.
OFF
Shufe by track
:
”Setup” “Other” “Random”
(vpage 16)
To switch between the Browse and
Remote modes
Either press and hold BROWSE/REMOTE.
Browse mode
This mode is for operating by displaying the iPod
information on the monitor connected to the ASD-
51W.
In this mode, it is not possible to operate the iPod
directly or to perform the operations associated with
the slide show function. Set the Remote mode to play
slide shows.
n
n
About the Internet Radio
Function
Internet radio refers to radio broadcasts distributed
over the Internet. Internet radio stations from around
the world can be tuned in.
The ASD-51W is equipped with the following Internet
radio functions:
Stations can be selected by genre and region.
Internet radio stations in MP3 and WMA (Windows
Media Audio) format can be listened to.
Your favorite radio stations can be registered by
accessing an exclusive DENON Internet radio URL
from a Web browser on a computer.
The function is managed for individual users, so
you must provide your MAC or e-mail address.
Exclusive URL: http://www.radiodenon.com
The ASD-51W’s Internet radio station list is created
using a radio station database service (vTuner). This
database service provides a list edited and created
for the ASD-51W.
The radio station database service may be
suspended without notice.
b
b
This procedure can be used to play Internet radio
stations or music or still picture (JPEG) files stored on
a computer.
Playback
ENGLISH

Getting Started Connections Setting Information Troubleshooting
Specifications
Album art function
When a WMA (Windows Media Audio), MP3 or MPEG-
4 AAC file includes album art data, the album art can
be displayed while the music files are playing.
For music files in WMA (Windows Media Audio)
format, the album art is only played when using
Windows Media Player ver. 11.
Slide show function
Still picture (JPEG) files stored in folders on a music
server can be played as slide shows.
The time for which each picture is displayed can be
set.
When still picture (JPEG) files are played on the
ASD-51W, they are played in the direction in which
they are stored in the folder, so store in them in the
direction in which you want them to play.
Installing Windows Media Player ver. 11
q If Windows XP Service Pack 2 has not yet been
installed, either download it free of charge from
Microsoft or install it via a Windows update
installer.
w Download the latest version of Windows Media
Player ver. 11, either directly from Microsoft or
using a Windows update installer.
b
When using Windows Vista, there is no need
to download a new version of Windows Media
Player.
n
n
Playing Network Audio
[Compatible formats]
Internet
radio
Media
server
b
WMA (Windows Media
Audio)
S S
MP3 (MPEG-1 Audio
Layer-3)
S S
WAV
S
MPEG-4 AAC
S
z
FLAC (Free Lossless
Audio Codec)
S
JPEG
S
A server or server software compatible with distribution
in the corresponding formats is required to play music
files via a network.
z: Only files that are not protected by copyright can
be played on the ASD-51W.
Contents downloaded from pay sites on the
Internet are copyright protected. Also, files
encoded in WMA format when ripped from a CD,
etc., on a computer may be copyright protected,
depending on the computer’s settings.
b The ASD-51W is compatible with MP3 ID3-Tag (Ver.
2) standards.
b The ASD-51W is compatible with WMA META
tags.
b WAV format Quantization bit rate: 16 bits.
[Playable formats]
Sampling
frequency
Bit rate Extension
WMA (Windows
Media Audio)
32/44.1/48
kHz
48~192
kbps
.wma
MP3 (MPEG-1
Audio Layer-3)
32/44.1/48
kHz
32~320
kbps
.mp3
WAV
32/44.1/48
kHz
.wav
MPEG-4 AAC
32/44.1/48
kHz
16~320
kbps
.aac/.m4a/
.mp4
FLAC (Free
Lossless Audio
Codec)
32/44.1/48
kHz
.flac
Napster
Napster is a monthly subscription music distribution
service provided by Napster. This service allows users
to download and play pieces of music they want to
hear on the ASD-51W. Before you can use Napster,
you will need to visit the Napster website on your PC
to create an account and register as a member. For
details, access the following site:
http://www.napster.com/choose/index_default.html
Rhapsody
Rhapsody is a paid music broadcast service of Real
Networks.
When you first listen to Rhapsody, it is necessary to
subscribe to a Rhapsody account at the Rhapsody
homepage by your PC and register this machine. See
the Rhapsody homepage for details.
www.rhapsody.com/denon
Playback
ENGLISH

Getting Started Connections Setting Information Troubleshooting Specifications
To stop
During the play or pause mode, press and hold
ENTER.
Searching pages
Press PAGE u (up) or PAGE i (down).
There are many Internet radio stations on the
Internet, and the quality of the programs they
broadcast as well as the bit rate of the tracks varies
widely.
Generally, the higher the bit rate, the higher the
sound quality, but depending on the communication
lines and server traffic, the music or audio signals
being streamed may be interrupted.
Inversely, lower bit rates mean a lower sound quality
but less tendency for the sound to be interrupted.
“Server Full” or “Connection Downis displayed if
the station is busy or not broadcasting.
n
n
uio p
FAVORITES
1/3
ENTER
PAGEu
9
PAGEi
8
RANDOM
MEMORY
REPEAT
If there is no network connection, toggle the
power operation switch to turn the power off and on
again.
Playing Network Audio
NOTE
Up to 20 stations stored in “Recently Played”.
Recently Played Internet Radio Stations
Recently played internet radio stations can be selected
from “Recently Played” in menu.
1
Use ui to select “Recently Played”,
then press ENTER or p.
2
Use ui to select the item you want
to play, then press ENTER or p.
Press MEMORY while the Internet radio
station you want to register is playing.
The Internet radio station is registered.
Listening to Internet Radio
Registering Internet Radio
Stations as Your Favorites
Favorites are listed at the top of the menu screen,
so when a station is registered as a favorite it can be
tuned in easily.
Listening to Internet Radio Stations
Registered in Your Favorites
1
Use ui to select “Favorites”, then
press ENTER or p.
2
Use ui to select the Internet radio
station, then press ENTER or p.
The ASD-51W automatically connects to the
Internet and playback begins.
1
Playback preparation.
q Check the network environment, then turn on
the ASD-51W’s power. (vpage 7 “Connecting
to a Home Network (LAN)”)
w If settings are required, make the network
settings. (vpage 11 ~ 15 “Network Setup”)
2
Use ui to select “Network”,
then
press ENTER or p.
3
Use ui to select “Internet Radio”,
then press ENTER or p.
4
Use ui to select the item you want
to play, then press ENTER or p.
The station list is displayed.
A
mark is indicated in front of stations
that can be played.
5
Use ui to select the station, then
press ENTER or p.
Playback starts.
Playback
ENGLISH

Getting Started Connections Setting Information Troubleshooting
Specifications
Playing Network Audio
Connections to the required system and specific
settings must be made in order to play music files
(vpage 7).
Before starting, you must launch the computer’s
server software and set the files as server contents.
For details, see the operating instructions of your
server software.
Depending on the size of the still picture (JPEG)
file, some time may be required for the file to be
displayed.
Playing Files Stored on a
Computer
Use this procedure to play music files, image files or
playlists.
Stopping playback temporarily
During playback, press ENTER or 1/3.
Press again to resume playback.
To stop (vpage 19)
Searching pages (vpage 10)
Selecting tracks
During playback, either press u, 8 (previous track)
or i, 9 (next track).
Playing repeatedly
Press REPEAT to switch the repeat mode.
All track repeat
OFF Single track repeat
Playing in random order
Press RANDOM to switch the random mode.
OFF
Random by song
Playing files that have been Registered
in Your Favorites
Files can be registered in your favorites and played
using the same operations as for Internet radio
stations.
NOTE
When the operation described below is performed,
the media server’s database is updated and it may
no longer be possible to play preset or favorite music
files.
When you quit the media server and then restart it.
When music files are deleted or added on the
media server.
When using an ESCIENT server, please “ESCIENT“
before the server name. (North America only)
n
n
n
n
n
n
Clearing Internet Radio Stations from
Your Favorites
1
Use ui to select “Favorites”, then
press ENTER or p.
2
Use ui to select the Internet radio
station you want to clear, then press
MEMORY.
3
Press o to select “Remove”.
The selected Internet radio station is cleared.
To cancel the operation without clearing the
station, press p.
Pressing FAVORITES also displays the favorites
folder.
1
Playback preparation.
q Check the network environment, then turn on
the ASD-51W’s power. (vpage 7 “Connecting
to a Home Network (LAN)”)
w If settings are required, make the network
settings. (vpage 11 ~ 15 “Network Setup”)
e Prepare the computer. (vComputer’s operating
instructions)
Install “Windows Media Player ver. 11”.
2
Use ui to select “Network”,
then
press ENTER or p.
3
Use ui to select the host name of
the computer on which the media le
you want to play is located, then press
ENTER or p.
4
Use ui to select the search item or
folder, then press ENTER or p.
A ” mark is indicated in front of music files
that can be played, and a mark is indicated
in front of image files that can be played.
5
Use ui to select the le, then press
ENTER or p.
Playback starts.
Playback
ENGLISH

Getting Started Connections Setting Information Troubleshooting Specifications
4
Use ui p to input “Username” and
“Password”.
Napster Account
OK
Enter Username
Username
Password
Cancel
5
After inputting the “Username” and
“Password”, select “OK”, then press
ENTER.
If the “Username” and “Password” match, the
top menu for Napster is displayed.
Username :
Password :
[Input characters]
GLower case charactersH a ~ z
GUpper case charactersH A ~ Z
GSymbolsH ! “ # % & ’ ( ) * + , - . / : ; < = > ? @
[ \ ] _ (Space)
GNumbersH 0 ~ 9
n
n
1
Use ui to select search item or
folder, then press ENTER or p.
2
Use u i to select the track item, then
press ENTER or p.
1
Press CHARACTER SEARCH.
8/9 Searc h
My Napster Library
Top 100s
New Releases
Radio
Napster Playlists
Staff Picks
Genres
[1/7]
Napster
Search by Artist
Search by Albums
Search by Track
You can search by artist name, album name or
track name.
b
Listening to Napster
Search From Napster Menu
Enter a Character Search For the Track
You Want to Listen to
uio p
ENTER
CHARACTER
SEARCH
Playing Network Audio
1
Playback preparation.
q Check the network environment, then turn on
the ASD-51W’s power. (vpage 7 “Connecting
to a Home Network (LAN)”)
w If settings are required, make the network
settings. (vpage 11 ~ 15 “Network Setup”)
2
Use ui to select “Network”,
then
press ENTER or p.
3
Use ui to select “Napster”, then
press ENTER or p.
NOTE
The password may not contain underscores ( _ ).
Playback
ENGLISH

Getting Started Connections Setting Information Troubleshooting
Specifications
Playing Network Audio
1
Press p while the track you wish to
register is playing.
2
Select “Add to My Napster Library”,
then press ENTER or p.
The track is entered in the Library.
1
Use u i to select “My Napster
Library”, then press ENTER or p.
2
Use u i to select the information or
track, then press ENTER.
After selecting, the information is displayed.
To stop (vpage 19)
Selecting tracks (vpage 23)
Playing repeatedly (vpage 19)
Playing in random order (vpage 23)
n
n
n
n
Registering Tracks in My Napster
Library
Listening to Tracks Registered In My
Napster Library
n
2
Use u i to select the search item,
then press ENTER.
The search display appears.
Enter Artist Name
Search by Artist
SubmitInput
3
Enter the characters, then press
ENTER.
Playback
ENGLISH

Getting Started Connections Setting Information Troubleshooting Specifications
Playing Network Audio
1
Use ui to select “Rhapsody Music
Guide”, then press ENTER or p.
2
Use u i to select the information for
track selection, then press ENTER or
p.
After selecting, the information is displayed.
3
Use ui to select the track, then press
ENTER or p.
NOTE
The password should be no longer than 99
characters.
The password may not contain underscores ( _ ).
5
Use ui p to input “Username” and
“Password”.
Rhapsody Account sign In
OK
Enter Username
Username
Password
Cancel
6
After inputting the “Username” and
“Password”, select “OK”, then press
ENTER.
If the “Username” and “Password” match, the
top menu for Rhapsody is displayed.
Username :
Password :
[Input characters]
GLower case charactersH a ~ z
GUpper case charactersH A ~ Z
GSymbolsH ! “ # % & ’ ( ) * + , - . / : ; < = > ? @
[ \ ] _ (Space)
GNumbersH 0 ~ 9
n
n
q Search From Rhapsody Latest
Information
Rhapsody
Rhapsody Music Guide
Search
Rhapsody Channels
My Library
[1/4]
q
w
e
r
Listening to Rhapsody
(for North America model only)
uio p
ENTER
1
Playback preparation.
q Check the network environment, then turn on
the ASD-51W’s power. (vpage 7 “Connecting
to a Home Network (LAN)”)
w If settings are required, make the network
settings. (vpage 11 ~ 15 “Network Setup”)
2
Use ui to select “Network”,
then
press ENTER or p.
3
Use ui to select “Rhapsody”, then
press ENTER or p.
4
Use ui to select “Sign in to your
account”, then press ENTER or p.
Rhapsody
Enter
Return
Start a 30-day trial
Sign in to your account
Select the Search Mode
Playback
ENGLISH

Getting Started Connections Setting Information Troubleshooting
Specifications
Playing Network Audio
1
Use ui to select “Search”, then
press ENTER or p.
2
Use u i to select the search item,
then press ENTER or p.
The search display appears.
You can search by artist name, album name, track
name or keyword.
3
Enter the characters, then press
ENTER.
b
w Enter a Character Search For the
Track You Want to Listen to
1
Use ui to select “Rhapsody
Channels”, then press ENTER or p.
2
Use u i to select radio station, then
press ENTER or p.
e Search From the Rhapsody Internet
Radio Station
1
Use ui to select “My Library”, then
press ENTER or p.
2
Use u i to select the information or
track, then press ENTER or p.
After selecting, the information is displayed.
r Listening to Tracks Registered In My
Library
1
Use ui to select “Rating”, then
press ENTER or p.
2
Use o p to select the rating, then
press ENTER.
q Search From the Similar Music
Press p during playback to display the
Track Menu.
Rhapsody
Jump to artist
Jump to album
Similar artists
Similar albums
Add to my library
Rating
[1/6]
q
w
e
Use ui to select the search item, then
press ENTER or p.
w Registering Tracks in My Library
Use ui to select “Add to My Library”,
then press ENTER or p.
The track is entered in the Library.
e Rating Function
Track Menu
Playback
ENGLISH

Getting Started Connections Setting Information Troubleshooting Specifications
Convenient Functions
Computer
(Media server)
ASD-51W
q Select a content.
Wireless LAN-
compatible router
Mobile device
StreamingStreaming
Operating a Wireless LAN-Compatible Mobile Terminal to Play Music
Perform this procedure using a wireless LAN-compatible mobile terminal conforming to the DLNA (Digital
Living Network Alliance) standard.
This function allows you to play contents located on a computer (media server) or mobile device connected in
a network by operating a mobile device in the same network.
There are two types of operations on the mobile device.
Playing Contents on a Computer (Media Server)
1
From the mobile device, browse the
media server in the same network and
choose the contents you want to play.
2
From the mobile device, select the
ASD-51W among the products in the
network.
Playback of the contents selected in step 1
begins.
When selecting the ASD-51W from the mobile
device, the name of the ASD-51W is displayed
at “Friendly Name(vpage 16 “Friendly Name
Edit”).
The following operations are possible from the
mobile device:
File operations (play, stop, pause, track search)
Play mode settings (repeat/random)
Volume adjustment
b
b
e Playback starts.
r Operation.
w Select a player.
Playback
ENGLISH

Getting Started Connections Setting Information Troubleshooting
Specifications
Convenient Functions
Playing Contents on a Mobile device
ASD-51W
q Select a content.
Wireless LAN-
compatible router
Mobile device
w Select a player.
e Playback starts.
r Operation.
1
Select the contents you want to play
from among the mobile devices.
2
From the mobile device, select the
ASD-51W among the products in the
network.
Playback of the contents selected in step 1
begins.
is displayed on the GUI screen while the
mobile device is being operated.
For the various settings and operating procedures,
see the operating instructions of the mobile devices
being used.
When selecting the ASD-51W from the mobile
device, the name of the ASD-51W is displayed at
“Friendly Name. “Friendly Namecan be edited at
“Friendly Name Edit” (vpage 16) as desired so
that it is easily distinguishable from other devices.
NOTE
When operations related to browsing or playback
(play, stop, pause, track search) are performed on
the ASD-51W while operating the mobile device,
the connection to the network is disconnected. The
network connection is also disconnected when the
party mode is started.
When selecting the ASD-51W from the mobile
device, the name of the ASD-51W is displayed
at “Friendly Name(vpage 16 “Friendly Name
Edit”).
The following operations are possible from the
mobile device:
File operations (play, stop, pause, track search)
Play mode settings (repeat/random)
Volume adjustment
b
b
Playback
ENGLISH
0
Getting Started Connections Setting Information Troubleshooting Specifications
Convenient Functions
Playing the Same Network
Audio on Different Devices
Connected in a Network
(Party Mode Function)
The same network audio (Internet Radio, Media Server
or iPod music file) can be played on multiple DENON
products equipped with the Party Mode function and
connected in a network.
The party mode consists of one organizer and up to
four attendees. When one unit starts the party mode
as the organizer, up to four devices on which the party
mode function is activated automatically participate
in the party as attendees. “Party Mode Function
(vpage 17) must be set to ON” ahead of time in
order to use the party mode function.
NOTE
If the ASD-51W is coupled with the DENON AVR-3310
or AVR-4310 AV receiver, when using the party mode
function you should first update the AVR-3310 or AVR-
4310 to the latest firmware.
See the AV receiver’s instruction manual for information
on how to perform the firmware update.
1
Press PARTY to become the organizer.
“Enter Party Mode?” is displayed.
An error message is displayed when you are not
connected to a network.
2
Press o p to select “Yes”, then press
ENTER.
The PARTY mode indicator on the front
panel lights up green, and the attendees are
automatically selected.
3
Play the desired track.
b
To Cancel the Party Moden
Starting the Party Mode as the
Organizer
1
While in the party mode, press
PARTY.
“Exit Party Mode?” is displayed.
2
Press o p to select “Yes”, then press
ENTER.
“Power off Attendees component?” is
displayed.
3
Press o p to select “Yes” or “No”,
then press ENTER.
Yes
: The power of the attendees is turned off
and the party mode is canceled.
No
: The party mode is canceled without turning
off the power of the attendees.
Starting the Party Mode as the
Attendee
When the organizer starts the party mode, up to four
attendees are selected automatically. No operation
is required.
When you become an attendee, the PARTY mode
indicator on the front panel lights up orange, and
you are able to enjoy the same network audio as the
organizer.
If there are fewer than four attendees, a device can
join the party mode after it has started. To participate
in the party mode, perform the operation described
below.
1
Press PARTY.
“Enter Party Mode?” is displayed.
An error message is displayed when you are not
connected to a network.
2
Press o p to select “Yes”, then press
ENTER.
b
o p
ENTER
PARTY
Playback
ENGLISH

Getting Started Connections Setting Information Troubleshooting
Specifications
Convenient Functions
Operating the ASD-51W with a
Browser (Web Control Function)
GiPod touch onlyH
You can operate the ASD-51W using a browser.
1
Check the ASD-51W’s IP address
with “Network Info” (vpage 11 ).
Network Info
DHCP
Friendly Name
IP Address
ON
SSID "ASD51WTEST"
DENON:[ASD-51W]
192.168.100.33
Mac Address 00:05:CD:00:40:23
Up/Down Back/Select
2
Enter the ASD-51W IP address in
browser’s address box.
For example, if the IP address of ASD-51W is
“192.168.100.33”, enter “http://192.168.100.33”.
Untitled
7:12 PMCarrier
Cancel
192.168.100.33
z: Entering the IP address.
Checking the IP address.
z
3
Operate.
When accessed from the iPod touch browser, an
optimized operation screen is displayed.
Power
Source
Volume
iPod/NetAudio Control
Down Up
(Dedicated iPod touch screen)
b
To Cancel the Party Moden
1
While in the party mode, press
PARTY.
“Exit Party Mode?” is displayed.
2
Press o p to select “Yes”, then press
ENTER.
In this case, the other devices remain in the
party mode.
“Rhapsody” and “Napster” are not available in
the Party Mode.
There can only be one organizer in the network. To
form a new party mode, first cancel the current party
mode.
Playback
ENGLISH

Getting Started Connections Setting Playback Troubleshooting Specifications
This is a free online contents server for Internet radio.
For inquiries about this service, visit the vTuner site
below.
vTuner website: http://www.radiodenon.com
This product is protected by certain intellectual
property rights of Nothing Else Matters Software
and BridgeCo. Use or distribution of such technology
outside of this product is prohibited without a license
from Nothing Else Matters Software and BridgeCo or
an authorized subsidiary.
A copyright-protected technology developed by
Microsoft.
Content providers are using the digital rights
management technology for Windows Media contained
in this device (WM-DRM) to protect the integrity of
their content (Secure Content) so that their intellectual
property, including copyright, in such content is not
misappropriated. This device uses WM-DRM software
to play Secure Content (WM-DRM Software). If the
security of the WM-DRM Software in this device
has been compromised, owners of Secure Content
(Secure Content Owners) may request that Microsoft
revoke the WM-DRM Softwares right to acquire new
licenses to copy, display and/or play Secure Content.
Revocation does not alter the WM-DRM Softwares
ability to play unprotected content. A list of revoked
WM-DRM Software is sent to your device whenever
you download a license for Secure Content from the
Internet or from a PC. Microsoft may, in conjunction
with such license, also download revocation list onto
your device on behalf of Secure Content Owners.
This is a media player distributed free of charge by
Microsoft Corporation.
It can be used to play playlists created with Windows
Media Player Ver. 11 as well as files in such formats as
WMA, DRM WMA, MP3 and WAV.
• DLNA and DLNA CERTIFIED are trademarks and/or
service marks of Digital Living Network Alliance.
• Some contents may not be compatible with other
DLNA CERTIFIED™
products.
DLNAWindows Media Player Ver.11
Windows Media DRM
vTuner
Other Information
About Networks
Wi-Fi
®
Wi-Fi Certification assures tested and proven
interoperability by the Wi-Fi Alliance, a group certifying
interoperability among wireless LAN devices.
IEEE 802.11b
This is one wireless LAN standard set by the 802
working group that establishes LAN technology
standards at the IEEE (Institute of Electrical and
Electronics Engineers) of the United States. It uses the
2.4 GHz band usable freely without a radio frequency
license (ISM band), enabling communications at a
maximum speed of 11 Mbps.
The value indicated above is the maximum
theoretical value for the wireless LAN standard, and
does not indicate the actual data transfer rate.
IEEE 802.11g
This is another wireless LAN standard set by the
802 working group that establishes LAN technology
standards at the IEEE (Institute of Electrical and
Electronics Engineers) of the United States, and is
compatible with IEEE 802.11b. It also uses the 2.4
GHz band, but enables communications at a maximum
speed of 54 Mbps.
The value indicated above is the maximum
theoretical value for the wireless LAN standard, and
does not indicate the actual data transfer rate.
About Wireless LAN
Information
ENGLISH

Getting Started Connections Setting Playback Troubleshooting
Specifications
WPA (Wi-Fi Protected Access)
This is a security standard established by the Wi-Fi
Alliance. In addition to the conventional SSID (network
name) and WEP key (network key), it also uses a user
identification function and encrypting protocol for
stronger security.
WPA2 (Wi-Fi Protected Access 2)
This is a new version of the WPA established by the
Wi-Fi Alliance, compatible with more secure AES
encryption.
WPA-PSK/WPA2-PSK (Pre-shared Key)
This is a simple authentication system for mutual
authentication when a preset character string matches
on the wireless LAN access point and client.
Passphrase
This refers to the code key used for WPA-PSK/WPA2-
PSK authentication, a WPA authentication method.
TKIP (Temporal Key Integrity Protocol)
This is a network key used for WPA. The encryption
algorithm is RC4, the same as for WEP, but the security
level is increased by changing the network key used
for encryption for each packet.
AES (Advanced Encryption Standard)
This is a next generation standard encryption method
replacing the current DES and 3DES, and because of
its high security it is expected to be applied widely
to wireless LANs in the future. It uses the “Rijndael”
algorithm developed by two Belgian cryptographers to
divide the data into blocks of fixed lengths and encrypt
each block. It supports data lengths of 128, 192 and
256 bits and key lengths of 128, 192 and 256 bits as
well, offering extremely high encryption security.
Infrastructure Communications
“Infrastructure Communications” refers to networks
using wireless LAN access points.
This function can be used to connect to the Internet or
a wired LAN via a wireless LAN access point. Wireless
LAN access points include wireless broadband
routers.
Network Names
(SSID: Security Set Identifier)
When forming wireless LAN networks, groups are
formed to prevent interference, data theft, etc.
This grouping is done by “SSID” or “Security Set
Identifiers”. For further security, a WEP key is set and
signal transfer is not possible unless the SSID and
WEP key match.
WEP Key (Network Key)
This is key information used for encrypting data when
conducting data transfer. On the ASD-51W, the same
WEP key is used for data encryption and decryption,
so the same WEP key must be set on both devices in
order for communications to be established between
them.
WPS (Wi-Fi Protected Setup)
This is a standard drawn up by the Wi-Fi Alliance to
ease the task of setting up wireless LAN connections
and configuring security.
There are two methods: push-button and PIN (Personal
Identification Number) code.
About Networks
Information
ENGLISH

Getting Started Connections Setting Playback Information Specifications
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction.
In this case, disconnect the power immediately and contact your store of purchase.
Symptom Cause Countermeasure Page
Set does not work
properly when remote
control unit operated.
• Battery are worn.
• You are operating outside of the specified range.
• Obstacle between main unit and remote control unit.
• The battery are not inserted in the proper direction,
as indicated by the polarity marks in the battery
compartment.
• The set’s remote control sensor is exposed to strong light
(direct sunlight, inverter type fluorescent bulb light, etc.).
• A mini-plug cable is connected to the REMOTE CONTROL
jack.
• Replace with new battery.
• Operate within the specified range.
• Remove the obstacle.
• Insert the battery in the proper direction, following the
polarity marks in the battery compartment.
• Move the set to a place in which the remote control sensor
will not be exposed to strong light.
• Remove the mini-plug cable from the REMOTE CONTROL
jack.
3
3
3
3
3
6
GRemote Control UnitH
Symptom Cause Countermeasure Page
No sound is produced.
No image appears on the
monitor.
• The iPod is not playing.
• The iPod is not properly connected to the ASD-51W.
• The AC adapter is not connected to the ASD-51W or a
power outlet. Or the power operation switch on the ASD-
51W is not set to “ON/STANDBY”.
• The AV/Control cable is not properly connected.
• The monitors input selection is not properly set.
• Check that the iPod is playing.
• Check that the iPod is properly connected to the ASD-
51W’s dock connector.
• Check the connections.
Set the power operation switch on the ASD-51W to ON/
STANDBY”.
• Check the connections.
• Set the monitors input selector to the proper position for
the connected video input terminal.
6
4
6
GGeneralH
Troubleshooting
Troubleshooting
ENGLISH

Getting Started Connections Setting Playback Information
Specifications
GNETH
Symptom Cause Countermeasure Page
Internet radio cannot be
played.
• Ethernet cable is not properly connected or network is
disconnected.
• Program is being broadcast in non-compatible format.
• The computers or router’s firewall is activated.
• Radio station is not currently broadcasting.
• IP address is wrong.
• Check the connection status.
• Only Internet radio programs in MP3 and WMA can be
played on this set.
• Check the computer’s or router’s firewall settings.
• Choose a radio station that is currently broadcasting.
• Check the set’s IP address.
7
21
Files stored on a
computer cannot be
played.
• Files are stored in a non-compatible format.
• You are attempting to play a file that is copyright
protected.
• Computers power is not turned on.
• Record in a compatible format.
• Files that are copyright protected cannot be played on this
set.
• Turn on the power.
21
21
Server is not found,
or it is not possible to
connect to the server.
• The computers or router’s firewall is activated.
• Computers power is not turned on.
• Server is not running.
• Set’s IP address is wrong.
• Check the computer’s or router’s firewall settings.
• Turn on the power.
• Launch the server.
• Check the set’s IP address.
Cannot connect to preset
or favorite radio stations.
• Radio station is not currently broadcasting.
• Radio station is not currently in service.
• The
RESET button was pressed.
• Firmware has been updated.
• Wait a while before trying again.
• It is not possible to connect to radio stations that are no
longer in service.
• When the
RESET button is pressed, the settings are
initialized and are restored to the default settings.
• When the firmware has been updated return to default
factory settings.
17
For some radio stations
cannot be connected to.
• Station is congested or not currently broadcasting. Wait a while before trying again.
Sound is broken during
playback.
• Network’s signal transfer speed is slow or communications
lines or radio station is congested.
• This is not a malfunction. When playing broadcast data with
a high bit rate, the sound may be broken, depending on the
communications conditions.
Sound quality is poor or
played sound is noisy.
• File being played has a low bit rate.
• Equalizer settings are configured in the iPod.
• This is not a malfunction.
• Release the iPod equalizer settings.
Troubleshooting
ENGLISH

Getting Started Connections Setting Playback Information Specifications
Symptom Cause Countermeasure Page
Cannot connect to
network.
• The settings of the SSID and network key (WEP) are
incorrect.
• The reception is poor and the signals cannot be received.
• There are multiple networks and the usable channels
overlap.
• The router power is off.
• Match the network settings with the ASD-51W’s settings.
• Shorten the distance from the wireless LAN’s access point,
remove any obstacles and otherwise improve visibility,
then try reconnecting. Also install away from microwave
ovens and the access points of other networks.
• Set the access point’s channel settings away from the
channels used for other networks. Alternatively, connect
using a network cable.
• Turn on the router power.
11 ~ 15
Played sound is
interrupted or sound
cannot be played.
• There are multiple networks and the usable channels
overlap.
• Set the access point’s channel settings away from the
channels used for other networks. Alternatively, connect
using a network cable.
GWireless LANH
Symptom Cause Countermeasure Page
For some radio stations,
“Server Full” or
“Connection Down” is
displayed and station
cannot be connected to.
• Station is congested or not currently broadcasting. Wait a while before trying again.
Cannot login to
Rhapsody. (“Incorrect
Username or Password”
is displayed.)
• Login information is incorrect. • Check if the Username for Rhapsody has been properly
entered. Re-enter the Password. (Password is not
displayed.)
www.rhapsody.com/denon
26
Cannot login to Napster.
(“Incorrect Username or
Password” is displayed.)
• Login information is incorrect. • Check if the Username for Napster has been properly
entered. Re-enter the Password. (Password is not
displayed.)
http://www.napster.com/choose/index_default.html
24
Troubleshooting
ENGLISH

Getting Started Connections Setting Playback Information Specifications
If a fault occurs during use of the ASD-51W, for example, if you cannot connect
to a network although the network settings are correct, or the iPod cannot be
detected or the remote control unit does not work, you may be able to resolve the
problem by taking the following action.
n Turn the power operation switch on the ASD-51W’s side panel
to “OFF”, and after about 30 seconds turn the power operation
switch to ON/STANDBY”. (restart operation)
n Reset the ASD-51W
Use the reset operation when you want to restore the default settings or when
the restart operation has failed to resolve a fault.
NOTE
When you reset the ASD-51W, your settings will be returned to the default
values. Please be aware that resetting the ASD-51W will erase all your
settings, including the stations registered in your Favourites and your
Recently Played list.
GHow to reset the ASD-51WH
Insert a thin, pointed object (
z
2) into the reset hole (
z
1) and press the
reset button inside the ASD-51W.
• The ASD-51W will restart automatically. The GUI screen will appear and the
reset operation will be complete.
b To press the reset button inside the ASD-51W use a thin, pointed object
such as a toothpick or an unfolded paper clip.
Diameter: 0.8 mm ~ 2.5 mm
Length: 25 mm or more
z
2
z
1
Restart and Reset Operations
Troubleshooting
ENGLISH

Getting Started Connections Setting Playback Information Troubleshooting
n
Control Dock for iPod
Power supply: DC IN 6V
Maximum external dimensions:
140 (W) x 40 (H) x 110 (D) mm
(5-33/64” x 1-37/64” x 4-21/64”)
Weight: 320 g (11.3 oz)
Terminal: Analog audio output connectors x 1,
Digital audio output connector x 1,
S-Video output connector x 1,
Dock Control jack x 1
Remote Control jack x 1
Ethernet connector x 1
Wireless antenna terminal x 1
n
AC Adapter (KSAFC0600150W1UV-1)
Rated voltage: 100 – 240 V, 50/60 Hz
Rated current:
0.3 A
n
Wireless LAN
Network type (wireless LAN standards) :
Conforming to IEEE 802.11b
Conforming to IEEE 802.11g
(Conforming to Wi-Fi
®
)
z
Transfer rate: DS-SS: 11 / 5.5 / 2 / 1 Mbps (Automatic switching)
OFDM: 54/48/36/24/18/12/9/6 Mbps
(Automatic switching)
Security:
SSID (Network name)
WEP key (network key) (64/128 bits)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
Used frequency range:
2,412 MHz ~ 2,472 MHz
No. of channels:
Conforming to IEEE 802.11b :
11ch (for North America),
13ch (for Europe) (DS-SS) (Of which 1 channel used)
Conforming to IEEE 802.11g :
11ch (for North America),
13ch (for Europe) (OFDM) (Of which 1 channel used)
n
Remote control unit (RC-1137)
Battery: CR2025 Type
Maximum external dimensions:
42.5 (W) x 100 (H) x 12 (D) mm
(1-43/64” x 3-15/16” x 15/32”)
Weight: 35 g (Approx 1.2 oz) (including batteries)
z: Wi-Fi
®
conformity indicates tested and proven interoperability by the “Wi-Fi
Alliance, a group certifying interoperability among wireless LAN devices.
b
For purposes of improvement, specifications and design are subject to change
without notice.
Specifications
Specifications
D&M Holdings Inc.
Printed in China 5411 10379 104D
www.denon.com
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon asd 51w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon asd 51w in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon asd 51w

Denon asd 51w Installation Guide - English - 1 pages

Denon asd 51w User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info