727625
9
Zoom out
Zoom in
Previous page
1/20
Next page
Cleaning
- Disconnect the appliance from the
mains and allow it to cool before
undertaking any cleaning task.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
- Do not submerge the appliance in
water or any other liquid, or place it
under a running tap.
- During the cleaning process, take
special care with the blades, as they
are very sharp.
- It is advisable to clean the
appliance regularly and remove any
food remains.
- If the appliance is not in good
condition of cleanliness, its surface
may degrade and inexorably affect the
duration of the appliance’s useful life
and could become unsafe to use.
- The following pieces may be washed
in a dishwasher:
- Food pusher
- Lower support platform
Removable blade and food carriage
for effective cleaning
-To remove food carriage for cleaning,
hold food carriage with two hands and
tilt frontward towards you. There is a
button to release the carriage marked
“Press to release.” Press, release,
and wash with warm soapy water. Dry
thoroughly. To reassemble, align top
part of food carriage to bottom part of
- Never leave the appliance
unattended while in use.
- Do not use the appliance for more
than 10 minutes at any one time.
Allow to cool for one hour before
subsequent use.
- Do not use the appliance with
frozen goods or those containing
bones.
- Pay special attention during the
assembly and disassembly of blades,
as they are sharp and could cause
harm.
- This appliance must be used with
the sliding feed table and the piece
holder in position unless this is not
possible due to the size or shape of
the food.
- Any misuse or failure to follow
the instructions for use renders the
guarantee and the manufacturer’s
liability null and void.
Instructions for use
- Connect the appliance to the mains.
- Place the food item on the lower
support platform and fix the food
pusher, which will hold the food item
in place. (Fig. 1)
- Adjust the thickness of the slice
using the thickness control dial.
(Fig. 2)
- Switch the appliance on using the
on/off button.
- Using the food pusher slide the food
item towards the blade. (Fig. 1)
Once you have finished using the
appliance:
- Unplug the appliance from the
mains.
- Clean the appliance.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Demoka SL-3524 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Demoka SL-3524 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info