524177
8
Zoom out
Zoom in
Previous page
1/15
Next page
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-8000, GT-FSI-05 / GT-FSI-05d
14
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-8000, GT-FSI-05 / GT-FSI-05d
15
Display on the remote socket without
dimmer
The control lamp illuminates when the remote socket is switched
on.
The control lamp is off when the remote socket is switched on.
Display on the remote socket with dimmer
The control lamp illuminates when the remote socket is switched
off and the connected lamp is switched on.
The control lamp is off when the remote socket is switched off and
the connected lamp is also switched off.
The control lamp is off when the remote socket is switched on and
the connected lamp is also switched on.
When dimming the lamp, the control lamp on the remote socket
becomes lighter and lighter until the lamp is completely switched off
and the control lamp has reached its maximum brightness.
When brightening the lamp, the control lamp on the remote socket
becomes darker and darker until the lamp has reached its maximum
brightness and the control lamp has completely switched off.
Installation of the remote sockets
Prior to initial operation of the remote sockets, please press the
NEW CODE button with a pen in the battery compartment of the
remote control, after you have inserted the batteries.
Note:
By pressing the NEW CODE button, the factory code settings
are deleted and a new, random code is created. This reduces the
likelihood of overlapping of the radio signals of the remote control
with other devices.
Plug one of the remote sockets into the wall socket intended for
use, and then plug a consumer (e.g. a lamp) into the remote socket.
Note:
Connect suitable lamps to the dimmable remote sockets! Please
ensure that you adhere to the information from the “Connection
of devices” section.
Switch your consumer on and then press the
button on the
remote socket briefly.
If you press the
/ button briefly again, your consumer will
switch off again.
If the remote socket is already removed from the socket after a
very short period of operation, the programming could be lost and
must be repeated. In normal operation, the programming can be
saved for approx. 1 hour after being disconnected from the mains.
Preparatory measuresPreparatory measures
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Delta GT-FSI-05 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Delta GT-FSI-05 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info