562711
8
Zoom out
Zoom in
Previous page
1/43
Next page
7
en
V Telescopic tube
W Extension release button
X Hose
Y Suction port catch
Z Vacuum power regulator
Tools
Z1 Multipurpose brush
Z2 Multi-purpose nozzle
Z3 Crevice tool
Using for the rst time (page 40)
Before using the appliance, remove the elements protecting
the dust container B and connect the hose to the handgrip.
Using the appliance (page 41)
Adjust the length of the telescopic tube, attach the tool suit-
able for the cleaning to be done and turn the appliance on. You
can adjust the suction power with the regulator Z.
EPS - Electronic protection system
The EPS device is activated when the lters are clogged. The
lightonthecontrolpanelashes.
If you continue to use the appliance once the light has come
on, the vacuum power is reduced automatically. This is a safety
device to avoid damage to the motor.
To start cleaning again, turn the appliance o, empty the con-
tainer and proceed cleaning (cleaning, pag. 42).
Cleaning (pag. 42)
To keep the appliance vacuuming eciently, the lter of the
dust container, the HEPA lter and its protection should be
cleaned whenever the EPS is activated or at least once every
six months. Before reinserting the impeller sponge lter, make
sure it is dry.
Warning: If you need to immediately use the appliance,
brush and shake the lters, without carrying out the
washing.
Park system (pag. 41)
The appliance is provided with a hose tidy system on the bot-
tom to enable it to be put away safely and tidily
Warning: Do not open the device when the handle is in
park position (K).
If you have to interrupt cleaning for a brief period, the appli-
ance has a convenient hose parking” system. Insert the bracket
on the brush joint into the housing on the bottom of the ap-
pliance.
Troubleshooting
The appliance does not come on.
It is not plugged into the mains socket. Plug into the mains socket.
The impeller turns slowly or not at all.
The rst time you use the appliance, it is nor-
mal for the impeller to rotate slowly.
Something is blocking the impeller. Extract and open the container. Remove the
elements blocking the movement and make
sure the internal rotating supports turn freely.
Filters are clogged. Clean the appliance (page 42) even if the eps
device has not interveened.
The lid of the appliance cannot be closed
The dust container is not inserted correctly. Extract and insert the container, aligning it
correctly in the appliance. When the container
is positioned correctly, you will hear a click
when the appliance is closed and the buttons
Q are released.
Check that the handgrip is not in parking po-
sition.
The vacuum power of the appliance drops
and the light Rashes
Filters are clogged or the hose is blocked. Empty the container and clean the appliance.
Make sure the hose is not blocked and if neces-
sary remove the obstructions.
en
Use - Cleaning - Park system
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi XTR 1600M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi XTR 1600M in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info