6
The "power on" light (N) comes on. The appliance is functioning only when the "ap-
pliance on" light (M) comes on.
Note: When the humidity in the room is higher than the humidity set, the "appliance
on" light (M) goes off. To turn the appliance on again, turn the ON/OFF/humidistat
selector (I) to the MAX position.
When the required level of humidity has been reached, turn the humidistat anti-
clockwise until the "appliance on" light (M) goes off. The appliance will now keep the
room at the set level of humidity.
When the water in the tank has been used up, the appliance stops humidifying and
all three lights come on. To restart the appliance, turn it off by placing the
ON/OFF/humidistat selector (I) to OFF, fill the tank with cold water, wait about 10 mi-
nutes then turn the appliance on again. If the appliance does not come on, repeat
the operation.
Model UH800E
When the appliance is plugged into the mains socket for the first time, you will hear
a beep and all the icons flash briefly on the display. It then goes into standby.
The appliance has five function buttons.
When one of these is pressed, you will hear a “beep”.
1. When the ON/OFF (T) button is pressed, the humidity in the room is displayed. If
the humidity is less than 40%,
LL OO
will be displayed. If it is more than 90%,
HH II
will
be displayed.
2. Set the required humidity using buttons (P) and (Q).
Note: Relative humidity can be regulated in steps of 5% from 40% to 85%.
If button (P) is pressed again, the appliance operates continuously and “
CC
oo
%”is displayed.
When the required humidity has been selected, room humidity is displayed.
3. When turned on, the appliance operates at maximum power "
HH II
". To set mini-
mum power, press button (R).
When the humidity in the room is higher than the humidity set, the appliance goes
off the " " symbol flashes on the display.
Note: If the power is left on, each time the appliance is started up it will retain the
last settings used.
When the water in the tank has been used up, the appliance stops operating and
the " " symbol flashes on the display.
To restart operation, fill the tank with water, wait about 10 minutes, then press the
restart button (S). If the appliance does not come on, repeat the operation.
• The humidifier takes at least three minutes to bring the water to the boil and emit
hot mist into the room.
• When the humidity in the room is lower than the set value, the appliance produces
mist. When it reaches the set level, it goes off.
• The cup for perfumes, aromatic substances and medicaments is located at the
centre of the mist discharge grill. To use, just add the aromatic substances. The
cup can be removed to facilitate washing. Never pour aromatic substances into the
water tank.
IMPORTANT: if you do not intend using the appliance for two or more days run-
ning, make sure the tank is completely empty and dry in order to prevent the for-
mation of algae and bacteria in the stagnant water.
