687066
17
Zoom out
Zoom in
Previous page
1/29
Next page
16
Please note:
At the end of delivery, to increase the quantity of coee in the
cup, just press and hold (within 3 seconds) the EXTRA -
button (B4). Once the desired quantity has been deliv-
ered, stop by pressing (B5) .
Important! Making LONG coee:
Halfway through preparation, the message "Add pre-ground
coee" appears on the display. Add one level measure of pre-
ground coee and press (B3) or (B5).
Please note:
If “Energy Saving” mode is active, you may have to wait a
few seconds before the rst coee is delivered.
Various alarm messages could be displayed while using the
appliance (Fill tank, Empty grounds container, etc.). Their
meaning is explained in section “21. Troubleshooting.
For hotter coee, see section “5.2 Tips for a hotter coee.
If the coee is delivered a drop at a time, too weak and not
creamy enough or too cold, read the tips in section “21.
Troubleshooting”.
5.1 Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A3) (g. 7).
Please note:
The grinding adjustment dial must only be turned when the
coee mill is in operation, in the initial stage of beverage
preparation.
If the coee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coee, turn
one click anticlockwise towards 1 (do not
turn more than one click at a time other-
wise the coee could be delivered a drop
at a time).
These adjustments will only be evident after at least 2 cups of
coee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
5.2 Tips for a hotter coee
For hotter coee, you should:
perform a rinse cycle by selecting the “Rinsing” function in
the settings menu (section “8.1 Rinsing”);
warm the cups with hot water using the hot water function
(see section “12. Delivering hot water”);
increase the coee temperature in the “Settings” menu
(see section “8.2 General”).
10. MAKING CAPPUCCINOS AND MILKBASED
COFFEES
Please note:
To avoid milk with poor froth or large bubbles, always
clean the milk container lid (D2) and hot water connection
nozzle (A15) as described in sections “8.2 Cleaning the milk
container after use, “4.3 Cleaning the milk container” and
“9.1 Cleaning the hot water nozzle”.
5.3 Filling and attaching the milk container
1. Remove the lid (D2) (g. 12);
2. Fill the milk container (D3) with a sucient quantity of milk,
not exceeding the MAX level marked on the handle (g. 13).
Each mark on the side of the container corresponds to 100
ml of milk;
3. Make sure the milk intake tube (D4) is correctly inserted in
the bottom of the milk container lid (g. 14);
4. Place the lid back on the milk container;
5. If present, extract the hot water/steam spout (C6) by press-
ing the release button (C7) (g. 15);
6. Attach the container to the connection nozzle and push
as far as it will go (g. 16). The machine emits a beep (if
enabled);
7. Place a suciently large cup under the coee spouts (A14)
and frothed milk spout (D5). Adjust the length of the milk
spout. To move it nearer the cup, simply pull it downwards
(g. 17);
8. Follow the instructions below for each function.
Please note:
For a denser more even froth, you must use skimmed or
partially skimmed milk at refrigerator temperature (about
5°C).
If “Energy Saving mode is enabled, you may have to wait a
few seconds before the beverage is delivered.
10.1 Adjusting the amount of froth
Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coees.
Dial
position
Description Recommended for
No froth HOT MILK (not frothed) /
CAFFELATTE
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi PrimaDonna S Evo ECAM 510.55.M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi PrimaDonna S Evo ECAM 510.55.M in the language / languages: English as an attachment in your email.

The manual is 20,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi PrimaDonna S Evo ECAM 510.55.M

DeLonghi PrimaDonna S Evo ECAM 510.55.M User Manual - German - 31 pages

DeLonghi PrimaDonna S Evo ECAM 510.55.M User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info