465793
27
Zoom out
Zoom in
Previous page
1/92
Next page
SINGLE SPLIT
7
ENGLISH
Mode of operation
I/O
On/Off/Stand-by
FAN
(Fan mode)
Every time the FAN button is pressed
the speed changes in the following
sequence: AUTO - LOW – MEDIUM
– HIGH. The remote control also
stores the speed that was set in the
previous mode of operation.
SWING
Adjustment of airflow. Press the
“SWING” button to start the
automatic swing of the airflow
direction flaps; press the “SWING”
button again to stop the movement.
If the appliance is operating in the
HEAT mode when the “SWING”
button is pressed, the start of this
function will be deliberately delayed
for a few seconds to ensure the
immediate outflow of warm air for
user comfort (Hot-Start function).
MODE
MODE
Selection of mode of operation. Every
time the MODE button is pressed
the mode of operation changes in
the following sequence: COOLING
– DRY – FAN – HEATING.
+
-
Buttons
(+) and (-)
Setting of temperature. Press once
to raise (+C°) or lower (-C°) the set
temperature by 1°C.
Available range of temperature
settings:
HEATING 16°C ~ 30°C
COOLING 16°C ~ 30°C
DEHUMIDIFYNG 16°C ~ 30°C
FAN 16°C ~ 30°C
INTELLIGENT REMOTE CONTROL
RESET
ON
MODE
OFF
!
+
-
88
12:38
°C
AUTO
PM
AM
ON TIMER
!
OFF TIMER
Note: the appliance will start in the mode of operation that
was selected before switching off.
Do not turn the vertical airflow direction flaps by
hand, since this could cause malfunctioning. In the
case of flap malfunction, first of all switch off the
appliance, disconnect it from the power supply and
then reconnect it.
Note: the appliance will start in the mode of opera-
tion that was selected before switching off.
Adjustment of horizontal airflow (manual)
To change the angle of the airflow, turn the adjusting cur-
sors of the horizontal airflow direction flaps as shown.
Note: the unit shown here may be different from the air
conditioner you have purchased.
This adjustment must be done with the appliance
switched off.
MODES OF OPERATION
USER
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi PLS110AR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi PLS110AR in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info