465790
38
Zoom out
Zoom in
Previous page
1/122
Next page
16
Ensure that when connecting the indoor and outdoor
units, the numbering on the respective terminal blocks
is observed.
We suggest the installation of RCD device with nomi-
nal differential current that doesn’t exceed the 30 mA.
INSTALLING THE OUTDOOR UNIT
Location
Use bolts to secure the unit to a flat, solid floor. When
mounting the unit on a wall or the roof, make sure the
support is firmly secured so that it cannot move in the
event of intense vibrations or a strong wind.
Do not install the outdoor unit in pits or air vents
Installing the pipes
Use suitable connecting pipes and equipment for the
refrigerant in the appliance (see rating plate).
The refrigerant pipes must not exceed the maximum
lengths given in the technical data table.
Lag all the refrigerant pipes and joints.
Tighten the connections using two wrenches working
in opposite directions.
Install the drain tting and the drain hose (for model
with heat pump only)
Condensation is produced and flows from the outdoor unit
when the appliance is operating in the heating mode. In
order not to disturb neighbours and to respect the environ-
ment, install a drain fitting and a drain hose to channel the
condensate water. Install the drain fitting and rubber washer
on the outdoor unit chassis and connect a drain hose to it
as shown in the figure.
Do not install the outdoor unit where it is exposed to
sunlight.
Ensure that the recommended space is left around
the appliance.
INSTALLER
WIRING DIAGRAMS
N 2 4 5
N 2 4 5
3
3
N(1)
N(1)
2
2
INDOOR UNIT INDOOR UNIT
OUTDOOR UNIT OUTDOOR UNIT
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi PLK130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi PLK130 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 10,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info