770067
7
Zoom out
Zoom in
Previous page
1/12
Next page
22
FAN MODE
Adjust fan speed by pressing the FAN button (C) as described for the air-conditioning mode.
Remember that the higher the speed, the more air is filtered. If you select "MIN" speed, less air is
filtered but the appliance is also less noisy.
DEHUMIDIFYING MODE
Ideal for reducing the humidity in a room without lowering or raising the temperature (spring or
autumn, damp rooms, rainy spells, etc). When the dehumidifying mode is selected, the light (P)
turn on. In this mode, with temperatures higher than 25°C it is possible to adjust the ventilation
speed.
If the temperature is less than 25°C the ventilation speed will be automatically adjusted by the
appliance and the ventilation light MED (L) will turn on.
Note: Remember to install the air exhaust hose as described in the chapter: “Preparing for use”.
PROGRAMMING THE TIMER
The timer can be used to delay appliance start up or shut down. This avoids wasting electricity by
optimising operating periods.
How to programme delayed start up
Plug the appliance into a mains socket and press the ON/Standby button (A), then select the
required operating mode and other settings (temperature, fan speed, etc).
Press the ON/Standby button (A) again to place the appliance in standby mode.
Press the timer button (D). The timer light "H" flashes.
Use the + (E) or - (F) buttons to set the number of hours delay before the appliance comes on.
The time increases or decreases in steps of one hour.
The indicator light (H) flashes until the appliance starts up.
You can set the appliance to come on with a delay of up to 12 hours.
To cancel the timer programme, press the timer button (D) again.
Light (H) stops flashing.
How to programme delayed shut down
Delayed shut down can be programmed in any operating mode (air conditioning / fan/ dehu-
midifying).
Press the timer button (D). The timer light "H" flashes.
Use the + (E) or - (F) buttons to set the number of hours delay before the appliance goes off.
The time increases or decreases in steps of one hour.
The light (H) flashes until the appliance turns off as programmed.
At the set time, the air conditioner shuts down and remains in standby.
To cancel the timer programme, press the timer button (D) again.
Light (H) stops flashing.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi PACN82 Eco at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi PACN82 Eco in the language / languages: English as an attachment in your email.

The manual is 0.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi PACN82 Eco

DeLonghi PACN82 Eco User Manual - Dutch - 12 pages

DeLonghi PACN82 Eco User Manual - French - 12 pages

DeLonghi PACN82 Eco User Manual - Italian - 12 pages

DeLonghi PACN82 Eco Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info