12
Operation
SELF-DIAGNOSIS
The appliance is equipped with a self-diagnosis system which identifies any operating problems.
IF THE DISPLAY SHOWS… ….WHAT SHOULD YOU DO?
HH PP
HIGH PRESSURE
Insert and re-insert the plug. If the problem persists, call the service
centre.
LOW TEMPERATURE
If the machine is operating as an air-conditioner or dehumidifier, this
will prevent the formation of ice. The appliance will start up auto-
matically once the defrosting process has ended.
FF FF
FAN FAILURE
PP FF
PROBE FAILURE
If either of these messages appears, call the service centre.
FULL TANK
Empty the tank at the rear of the appliance and reposition correc-
tly.
THIS UNIT EMPLOYS AN EXCLUSIVE CON-
DENSATION RECYCLING SYSTEM TO DISPO-
SE OF EXCESS MOISTURE. IN NORMAL
CONDITIONS, CONDENSATION IS DISPO-
SED OF AUTOMATICALLY. WHEN THE HUMI-
DITY IS PARTICULARLY HIGH, AN EXCESS OF
CONDENSATION MAY BUILT UP IN THE TANK
. WHEN THIS HAPPENS, IN THE DISPLAY
APPEARS , INDICATING THAT THE TANK
SHOULD BE EMPTIED.
WHENEVER CONDITIONS OF HIGH HUMI-
DITY MAKE THE PROBLEM RECURRENT, YOU
MAY DISCHARGE THE EXCESS WATER
DIRECTLY INTO A DRAIN, USING THE RUB-
BER TUBE SUPPLIED; THE TUBE SHOULD BE
INSERTED INTO THE HOLE PROVIDED, AFTER
HAVING REMOVED THE RUBBER STOPPER.
9
MAKE SURE THE TANK IS PUT BACK COR-
RECTLY OTHERWISE IN THE DISPLAY WILL
REMAIN .
