133974
18
Zoom out
Zoom in
Previous page
1/84
Next page
18
Turning on and Selecting functions
ELECTRICAL CONNECTION
1. Before plugging in check that:
the mains supply corresponds to the value
shown in the specifications table;
the socket and the mains lead correspond
to the power requirements of the applian-
ce;
the socket is suited to the plug, otherwise
have the socket replaced;
the socket is properly grounded. The
manufactures cannot be held responsible
for any damages due to failure in following
normal safety procedures.
12
6
9
1
0
STOP
MANUAL
E
TIMER: SETTING THE TIME
As with all clocks, the programmer/timer must
be set to the right time. If it is 16.00, rotate the
pointers clockwise (follow the direction of the
arrow) until you reach 16.00.
N.B.: never rotate the face in the opposite
direction!
TIMER: PROGRAMMING
1) Set the times when the unit will function by
pushing the teeth in the required interval
towards the outside (each tooth repre-
sents 15 minutes).
3) Check that the timer indicates the exact
time (see setting the time).
4) Choose the required function according
to the instructions on the following page.
The timer is an electric clock and only
works while the unit is connected to the
mains. When it is unplugged or there is no
electricity, the timer stops (the clock is
“slow”) and must be put right.
9
8
12
7
4
Period of operation
Example:
from 7.00 to 9.00
In this mode, the unit will repeat the set pro-
gramme every day.
N.B.: It is not necessary to modify the pro-
gramme to exclude “timer” operation. Just
turn the switch to 1 (manual).
2. Before setting the required function, check
that the timer switch is on 1 (manual).
If you want to use the timer, turn the switch to
the intermediate position .
7
Replacement of the power cable must be
carried out by qualified personnel.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi pac f200 super pinguino at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi pac f200 super pinguino in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info