10
Before cleaning or maintainig the unit, always turn
the unit off by placing the selector in the “O” posi-
tion and unplug from the mains .
CLEANING THE APPLIANCE
We recommend cleaning the appliance with
a slightly damp cloth then drying with a dry
cloth. For safety reasons, do not wash the air
conditioner with water.
Precautions
Never clean with benzene, alcohol or sol-
vents. Never spray liquid insecticide or similar.
CLEANING THE AIR FILTERS.
To maintain the air conditioning unit at peak
efficiency, you are recommended to clean
the filter weekly.
The air purification filters are located behind the
two intake grilles.
To clean the filters:
1.Remove the intake grills on either side
of the appliance by rotating them outwards.
7
10
To remove dust deposited on the filter, use a
vacuum cleaner. If very dirty, rinse repeatedly
in warm water at a temperature of not more
than 40° C.
After washing, dry the filter. To replace, put
the filters back into the intake grill, then hook
the latter to the unit.
START OF SEASON CHECKS
Check that the power cable and socket are
undamaged and that the earth installation is
efficient.
Carefully observe the installation
instructions.
END OF SEASON OPERATIONS
Empty the residual water by removing the
bung in the drainage tube . Take out the
condensation tank located in the rear of
the unit and empty it. After replacing the
bung, put the condensation tank back.
Clean the filters and dry well before repla-
cing.
Protect the unit from dust by covering with a
plastic bag.
8
9
fig. F
fig. G
intake grill
filter
Cleaning
1
2
(see fig. F)
2. Remove the filter holder holding the filter by
unhooking it from the intake grill (see fig. G)
