11
Using the remote control unit
TURNING THE APPLIANCE ON
Plug the appliance into an electrical socket.
Press the ON/OFF button (18) (when turned on, the air conditioner starts operating in the same
mode as when it was turned off).
Press the MODE button (19) to select the required mode
AIR-CONDITIONING (COOL)
DEHUMIDIFYING (DRY)
FAN ONLY (FAN)
An arrow on the display indicates the selected mode.
AIR-CONDITIONING MODE (COOL)
Ideal for hot humid weather when you need to cool and dehumidify the room.
In air-conditioning mode, use the buttons to select the desired temperature.
The display shows the set temperature.
To change the fan speed, use the FAN button (17) on the remote control, choosing from the avai-
lable speeds:
AUTO: the appliance automatically selects the most suitable fan speed in relation to the tem-
perature set on the digital display.
HIGH: the air conditioner operates at maximum to reach the required temperature as rapidly as
possible.
MED:reduces noise levels but still maintains a good level of comfort.
LOW: for silent operation.
Two arrows on the display indicate respectively COOL and the fan speed.
The most suitable temperature for the room during the summer varies from 24 to 27°C (75 to 81°F).
It is recommended, however, not to set a temperature much below the outdoor temperature.
DEHUMIDIFYING MODE (DRY)
Ideal to reduce room humidity (spring and autumn, damp rooms, rainy periods, etc).
In dehumidifying mode, the appliance selects fan speed automatically.
Two arrows on the remote control display indicate DRY and AUTO respectively.
FAN MODE ONLY (FAN)
In fan mode, fan speed can be set by pressing the FAN button (17).
The fan speed changes between the speeds available (LOW/MED/HIGH).
Two arrows on the display indicate FAN mode and the speed set.
In this mode, AUTO speed cannot be selected.
SETTING THE TIMER
The timer can be used to delay appliance start up or shutdown. This avoids wasting electricity by
optimizing operating periods.
How to program delayed shutdown
•With the air-conditioning unit on, press the TIMER button (20). The time is displayed and the "h"
symbol flashes, with a flashing arrow indicating TIMER OFF.
• Set the time when you want the appliance to go off using the buttons (from 30 minutes to
24 hours). During the first ten hours, you can select half hour intervals. For times greater than
ten hours, one hour intervals can be selected.