SEMI-PERMANENT INSTALLATION
If required, your appliance can also be
installed semi-permanently (Fig. E).
Proceed as follows:
• Drill a hole ø 134 mm (5.27 in.) in an out-
side wall or through a window pane.
Respect the dimensions and height of the
hole given in figure F and G.
• Fit the wall flange into the hole.
• Fit the air exhaust hose in the housing
at the back of the appliance. (fig. A page
5).
• Fit the end of the air exhaust hose to
the wall flange as shown in fig. G.
10
12
12
10
G
NOTE: When installing the air conditioner
semi-permanently, you should leave a door
slightly open (as little as 1/2 - in 1 cm ) to guar-
antee correct ventilation.
6
E
Keep the air hose as short and free of
curves as possible to avoid constrictions.
When the hose (12) is not fitted, the drilled
hole can be closed with the flange cap (10).