23
AIR-CONDITIONING WITH INSTALLATION
If required, your appliance can also be installed semi-perma-
nently (Fig. 4).
Proceed as follows:
• Drill in an outside wall or in the window pane a 134 mm dia.
hole respecting the heights shown in fig. 5.
in the window pane
in the wooden kickboard
of a French window
in the wall: you are
recommended to insula-
te the section of wall
using suitable insulation.
• Fit the flange accessory provided in the hole following the
indications in figs. 6, 7 and 8.
• Fit the hose in the housing at the back of the appliance (fig.
1).
• Fit the end of the hose to the flange as shown in fig. 5. When
the hose is not fitted, the hole can be closed with the flange
cap.
Keep the air hose as short and free of curves as possible to avoid
bottlenecks.
When installing the air conditioner semi-permanently, you
should leave a door slightly open (as little as 1 cm) to gua-
rantee correct ventilation.
