465787
35
Zoom out
Zoom in
Previous page
1/127
Next page
ON
MODE
OFF
+
-
SINGLE SPLIT
11
ENGLISH
I COMFORT FUNCTION
ROOM TEMPERATURE FUNCTION
TURBO POWER FUNCTION
Press the I COMFORT ( ), )button and the symbol
appears on the display.
This function is used to obtain the required climate in
the exact point where the remote control is located.
The temperature of reference is that measured by the
sensor in the remote control, bypassing the temperature
sensor inside the air conditioner.
The remote control must always by pointed at the
unit.
If no signal is received from the remote control for
11 minutes, the unit will once again refer to its own
internal sensor
Press the ROOM TEMPERATURE
button (only on the
F Logic remote control) for the various modes of measur-
ing the temperature in the room where the appliance is
installed.
A few display examples are given in the table:
USER
USER
USER
INTELLIGENT REMOTE CONTROL
!
INTELLIGENT REMOTE CONTROL

°C
INTELLIGENT REMOTE CONTROL
ON OFF
!
ON OFF
!
I-COMFORT function not active
Remote control display Indoor unit display
Set temperature Set temperature
Temp. measured by
indoor unit sensor
Set temperature
Function unavailable
I-COMFORT function active
Temp. measured by
remote control sensor
Set temperature
SLEEP MODE
USER
Night mode
To activate the night function in the COOL, DRY and HEAT
modes, press the SLEEP button. The symbol
appears on
the display. To deactivate the night function, press the SLEEP
(
) button again.
During operation in the night mode, the set temperature in-
creases by 1 °C in the rst hour of operation and by another
1 °C in the following hour, maintaining this increase of 2°C
in the subsequent hours.
Selecting the night function in the heating mode, the set
temperature decreases by 1 °C in the rst hour of opera-
tion and by another 1 °C in the following hour, maintaining
this decrease of 2°C in the subsequent hours with the fan
operating at minimum speed.
To activate the TURBO POWER function, press the
button. The symbol appears on the display.
In the COOL or HEAT mode, the air conditioner will auto-
matically operate at maximum power. To deactivate this
function just change the fan speed or press the
button
again.
INTELLIGENT REMOTE CONTROL
ON
OFF
!
NOTE: Under FAN and SMART modes, this function is not
available.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ONE130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ONE130 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info