720092
6
Zoom out
Zoom in
Previous page
1/31
Next page
2
1
2
1
EN
FR
EN
FR
1110
AVERTISSEMENT:
Soyez prudent en enlevant le support
de tasse car il peut contenir du liquide
chaud. Assurez-vous de bien mere le
support en place avant d'y placer une
tasse.
CAUTION:
Be careful
when removing the cup support since
it may contain warm liquid.
Make sure the cup support is properly
placed before puing the cup.
1
The water tank arm can be rotated and positioned
at the back, to the le or to the right hand side of the
machine.
Le bras du réservoir d'eau peut être déplacé à
l'arrière, à gauche ou à droite de la machine.
2
Remove the water tank by tilting it slightly backwards,
then gently pulling it up.
Put the water tank in position by placing it vertically onto
its arm, until there is a ‘click’ sound.
Pour enlever le réservoir d'eau, penchez-le légèrement
vers l'arrière et levez-le doucement.
Installer le réservoir d'eau en position verticale sur son
bras. Vous entendrez un clic.
2
To place the cup support, slide cup support straight into
the holes and gently push down until the hooks are well
in place.To remove it, gently li straight up and then pull
the cup support out.
Pour installer le support de tasse, insérez-le dans les
trous et appuyer doucement vers le bas jusqu'à ce
que les crochets soient bien en place. Pour le retirer,
soulever doucement vers le haut, puis extraire les
crochets.
MACHINE HANDLING/
MANIPULATION DE L'APPAREIL
CUP SUPPORT/SUPPORT DE TASSE
WATER TANK/RÉSERVOIR D’EAU
CAPSULE CONTAINER/COLLECTEUR DE CAPSULES USAGÉES POWER CABLE/CÂBLE ÉLECTRIQUE
2
Place the capsule container in the back of the machine
by sliding it sideways into position. It is held in place by
a magnet.
Place the water tank back.
Glisser le collecteur de capsules à partir du côté de la
machine jusqu'à ce qu'il soit en position. Il sera maintenu
en place par un aimant.
Replacer le réservoir d'eau.
1
Remove the water tank, then remove the capsule
container by sliding it sideways.
Enlever le réservoir d'eau, puis glisser le collecteur
de capsules vers le côté.
1
The cup support has 4 positions
and can be temporarily removed
to accommodate various cup
sizes.
Le support de tasse peut être
réglé en 4 positions diérentes
ou être retiré selon les diérentes
tailles de tasse.
1
The power cable can be adjusted under the machine. Insert
the remaining cable in the guide on the le or on the right
side socket, depending on the position chosen for the water
tank. Ensure machine is in the upright position.
Le câble électrique peut être ajusté sous la machine. Placer
le câble dans la cavité de gauche ou de droite selon la
position choisie pour le réservoir d'eau. Assurez-vous que la
machine est bien à la verticale.
WARNING:
Be careful when removing
the water tank since the machine may tilt during the
movement.
AVERTISSEMENT:
soyez prudent
de ne pas faire tomber la machine en enlevant le
réservoir d'eau.
9465_UM_ARES_PLUS_D_Dellonghi_US.indd 10-11 14.07.16 10:37
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Nespresso Vertuo Plus - ENV150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Nespresso Vertuo Plus - ENV150 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Nespresso Vertuo Plus - ENV150

DeLonghi Nespresso Vertuo Plus - ENV150 User Manual - All languages - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info