Manual DeLonghi Maestosa - EPAM960.55 (page 15 of 25) (English)

821514

Zoom out

Zoom in

1/25

Pour the descaler into

the tank up to the level

A marked inside the tank

(equal to one 100ml pack-

et), then add water (litre)

up to level B

(g. 49). Put

the water tank (with lid)

back in the appliance, close

the front door and press

"Next"

;

7. Place an empty container with a minimum capacity of

2 litres under the hot water/steam spout (E) and coee

spouts (A15) (g. 8). Press OK to start the process ("Back"

to go back to the previous screen or "Cancel" to exit the

procedure, remembering to remove the descaling solution

from the tank)

Important! Danger of scalding

Hot water containing acid ows from the hot water/steam and

coee spouts. Take care to avoid contact with splashes of this

solution.

8. IThe descale programme starts and the descaler liquid

comes out of the hot water and coee spouts (g. 11). A

series of rinses is performed automatically to remove all

the scale residues inside the coee machine;

After about 30 minutes, descaling stops;

9. The appliance is now ready for rinsing through with clean

water. Empty the container used to collect the descaler

solution; open the front door by pressing the button, ex-

tract the water tank, empty, rinse under running water, ll

with fresh water up to the MAX level and put back in the

appliance. Close the front door. Press "Next";

10. Place the container used to collect the descaler solution

empty under the coee spouts and hot water/steam spout

and press "OK" to start rinsing;

11. Hot water is delivered from the coee spouts and hot

water/steam spout;

12. When the water in the tank has run out, empty the con-

tainer used to collect the rinsing water;

13. (If the lter was installed): press the button and open the

front door; extract the water tank and, if removed previ-

ously, put the lter back. Press "Next" to continue;

14. Fill the tank with fresh water up to the MAX level, put

back in the appliance, close the door and press "Next" to

continue;

15. Place the container used to collect the descaler solution

empty under the hot water/steam spout

and press "OK"

to start rinsing;

16. Rinsing starts and water is delivered from the hot water/

steam spout;

17. When the water in the tank has run out, empty the con-

tainer used to collect the rinsing water, press the button

and open the front door, remove and empty the drip tray

(A12) and grounds container (A8), then put back in the

appliance;

18. Extract the water tank, top up to the max level, put back in

the appliance and close the front door, then press "Next"

19. The descaling process is now complete. Press "OK". The ap-

pliance performs a rapid preheat cycle and then goes back

to the homepage.

Please note!

• If the descaling cycle is not completed correctly (e.g. no

electricity) we recommend repeating the cycle;

• After descaling, it is normal for the grounds container

(A16) to contain water.

• If the water tank has not been lled to the MAX level, at

the end of descaling, the appliance requests a third rinse to

guarantee that the descaler solution has been complete-

ly eliminated from the machine's internal circuits. Before

starting rinsing, remember to empty the drip tray.

17. SETTING WATER HARDNESS

The descaling alarm is displayed after a period of time estab-

lished according to water hardness. The machine is set by de-

fault for a hardness value of "Level 4". The machine can also be

programmed according to the hardness of the mains water in

the various regions so that the machine needs to be descaled

less often.

17.1 Measuring water hardness

1. Remove the "Total hardness test" indicator paper (C1) from

its pack (attached to the Quick Guide).

2. Immerse the paper completely in a glass of water for one

second.

3. Remove the paper from the water and shake lightly. After

about a minute, 1, 2, 3, or 4 red squares form, depending

on the hardness of the water. Each square corresponds to

one level.

17.2 Setting water hardness

1. On the display (B1), press the settings menu icon (B7);

2. Select "Water hardness";

3. Carry out the procedure described in the previous section

and measure water hardness;

4. Press the dot corresponding to the water hardness meas-

ured previously as indicated in the following table:

A B

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Maestosa - EPAM960.55 in the language / languages: English as an attachment in your email.

The manual is 6.31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Maestosa - EPAM960.55

DeLonghi Maestosa - EPAM960.55 User Manual - German - 28 pages

DeLonghi Maestosa - EPAM960.55 User Manual - Dutch - 26 pages

DeLonghi Maestosa - EPAM960.55 User Manual - French - 27 pages

DeLonghi Maestosa - EPAM960.55 User Manual - Italian - 26 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi Maestosa - EPAM960.55 Manual

Product: