821514
10
Zoom out
Zoom in
Previous page
1/25
Next page
15
11.2 Customising the beverages
To deliver the desired quantity of hot water, proceed as follows:
1. Press (B5) at the bottom of the image corresponding
to hot water. The selectable quantities appear on the dis-
play (B1):
"Quantity"
2. After selecting the quantity, press : The appliance
proceeds with preparation and the image of the beverage
appears on the display together with a progress bar which
gradually lls as the operation proceeds and a description
of the phase (water delivery).
3. At the end of delivery, the message: "Your beverage is
ready! Save new settings?" is displayed;
4. Press "Save" to save the settings (or "Cancel" to retain the
previous parameters).
The appliance is now ready to be used again.
Please note!
If "Energy Saving" mode is active, you may have to wait a few
seconds before the hot water is delivered.
To interrupt delivery of hot water manually, press "Stop"
and "Cancel".
12. STEAM DELIVERY
To deliver steam, proceed as follows:
1. Attach the hot water/steam spout (F) to the connection
nozzles (A9) (g. 7): the appliance beeps (if the beep func-
tion is enabled);
2. Fill a container with the liquid to be heated or frothed and
immerse the hot water/steam spout in the liquid (g. 29);
3. Press the image on the homepage (B) corresponding to
steam. The appliance proceeds with preparation and the
image of the beverage appears on the display (B1) togeth-
er with a progress bar which gradually lls as the operation
proceeds and a description of the phase (steam delivery);
4. When the required temperature or level of froth is ob-
tained, interrupt steam delivery by pressing "Stop" or
"Cancel".
Important!
Always shut o the steam before the container with the heated
liquid is drawn clear of the spout, as splashes can cause scalding.
Please note!
If
"Energy saving" is active, you may have to wait a few seconds
before
steam is delivered.
12.1 Tips for using steam to froth milk
When choosing the appropriate size of container, remem-
ber that the liquid will double or triple in volume.
For a richer and denser froth, use skimmed or partially
skimmed milk from the refrigerator (about 5°C).
For a creamier froth, swirl the container slowly, moving it
from the bottom upwards.
To avoid producing milk with poor froth or large bubbles,
always clean the spout (E) as described in the following
section.
12.2 Cleaning the hot water/steam spout after
use
Always clean the hot water/steam spout (E) after use to avoid the
build-up of milk residues and prevent it from clogging.
1.
P
lace
a container under the hot water/steam spout
and de-
liver a little water (see section “11. Delivering hot water
”). Stop delivery of hot water by pressing "Stop";
2. Wait a few minutes for the hot water/steam spout to cool
down, then extract (g. 21) by pressing the release button
(E3);
3. Turn the connector (E2) clockwise and extract (g. 30);
4. Hold the spout (E1) with one hand and with the other, turn
the cappuccino maker (E5) and pull it downwards (g. 31).
Also remove the steam connection nozzle (E4) by pulling
it downwards;
5. Check the hole in the connection nozzle is not blocked. If
necessary, clean using a toothpick.
6. Wash all components of the spout thoroughly with a
sponge and warm water. Use the tube brush (C7) to scrape
o any milk residues.
7. Replace all the spout components correctly.
13. GUIDED BEVERAGE CUSTOMISATION MY
You can use this function to customise all beverages with the
MY symbol at the bottom of the image in beverage settings
(on the homepage (B), press at the bottom of the image
corresponding to the required beverage). To customise, proceed
as follows:
1. Make sure the prole (B2) for which you want to customise
the beverage is active;
2. Press (B5) at the bottom of the image corresponding
to the desired beverage;
3. Press at the bottom of the image corresponding to the
beverage;
4. Press "OK" to follow the guided procedure;
5. Select your preference and press "Next" to move on to the
next step (or "Back" to go back to the previous screen);
6. Press "OK" to begin delivery;
7. Preparation begins and the appliance displays the quanti-
ty customising screen in the form of a vertical bar (in the
case of beverages with milk and coee, customise both
ingredients).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Maestosa - EPAM960.55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Maestosa - EPAM960.55 in the language / languages: English as an attachment in your email.

The manual is 6.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Maestosa - EPAM960.55

DeLonghi Maestosa - EPAM960.55 User Manual - German - 28 pages

DeLonghi Maestosa - EPAM960.55 User Manual - Dutch - 26 pages

DeLonghi Maestosa - EPAM960.55 User Manual - French - 27 pages

DeLonghi Maestosa - EPAM960.55 User Manual - Italian - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info