687504
8
Zoom out
Zoom in
Previous page
1/9
Next page
7
you can now set the kettle on the base at any angle, from any
position.
• Releasethecordfromthestoragebaseandadjustthe
length by winding around the base to give the correct
cord length to reach the plug socket to be used (g. 4).
• Donotleaveloosecordhangingovertheedgeofwork
surfaces.
Filling
• Removethekettlefromthebaseunitbeforelling.
• Removethelidandllthekettletothedesiredlevel.
Do not ll with less than 0.3 litres of water (min
level) to prevent the kettle running dry while in use;
misuse of this kind will shorten the life of the element.
Do not ll with more than 1.5 litres of water (max.
level).
If the kettle is overlled, there is a risk that
boiling water may overow and cause burns.
• Toclosethelid,pushitontothekettlebodyuntilitclicks
rmly into place.
• Thewaterlevelindicatorenablesyoutoseethequantity
of water in the kettle.
Switching on
• Plugthepowerbaseintothemainssocket.
• Placethekettleonthepowerbase.
• Push the ON/OFFswitch down (g.5) to switch the
kettle on.
• Thepower-onindicatorlightswillilluminate.
• Thekettlewillautomaticallyswitchooncethewater
is boiled (the ON/OFF switch will click upwards and the
lights will switch o ).
• To turnthekettleobeforethewaterboils,youmay
move the ON/OFF switch up to the OFF position, or
simply lift the kettle from its base - it will switch o and
the switch will return to the OFF position automatically.
Pouring
• Removethekettlefrom the powerbase and carefully
pour out the water. Do not tilt the kettle suddenly or
pour water out at too sharp an angle.
• When youlift the kettlefrom the base, youmay see
moisture on the top surface of the base. Condensation
on the base is perfectly normal, and should not be a
cause for alarm.
SAFETY DEVICES
1) Automatic ON/OFF switch
Your kettle is tted with an ON/OFF switch which
automatically switches o once the water has boiled.
If the kettle has just boiled, wait a minute or so before
re-boiling the kettle. Do not attempt to hold the ON/
OFF switch in the on” position or adjust the switch
mechanism.
2) Safety cut-out
If the kettle is switched ON with too little or no water, it
is protected against damage by a safety cut-out device
which will switch o the power.
If this cut-out operates, disconnect the kettle from
the mains supply and leave to cool down before
relling with cold water (otherwise the element could
be damaged). It will reset automatically when cooled
down.
3) If the kettle is lifted from base while operating (ON), it
will automatically switch o.
CLEANING AND MAINTENANCE
Cleaning the kettle
• Allowthekettletocooldownfullyanddisconnectthe
appliance from the mains before cleaning.
• ONLY USE WATER FOR CLEANING.
• Donotimmersethekettleorbaseinwater.
• Useasoftdampenedclothtowipetheoutsideofthe
kettle and dry with a soft, dry cloth.
• DONOTuseharshscouringagents.
• Ensurethatallelectricalconnectorsandsocketsarekept
dry.
Safety devices/ Cleaning and maintenance
5
4
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi KBZ3001 Scultura at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi KBZ3001 Scultura in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info