770055
3
Zoom out
Zoom in
Previous page
1/4
Next page
10
In use
With the specially designed power base and central
connector, you can now set the kettle on the base at any
angle, from any position.
- Release cord from storage base and adjust length
by winding around the base to give the correct cord
length to reach the plug socket to be used (g. 4).
- Do not let cord hang over edge of table or counter, or
touch hot surfaces (for example the top B).
Filling
- Remove the kettle from the base unit before lling.
- Open lid and ll kettle to desired level.
Do not ll with less than 0.3 litres of water
to prevent the kettle running dry while operating;
misuse of this kind will shorten the life of the element.
Do not ll with more than 1.7 litres of water
(up to the MAX level). If the kettle is overlled,
there is a risk that boiling water may be ejected
causing burns.
Switching on
- Plug the power base into the mains socket.
- Place kettle on power base.
- Press the ON/OFF switch down (g. 5) to switch the
kettle on.
- The pilot light will switch on.
- The kettle will automatically switch o once the water
is boiled (the ON/OFF switch will click upwards and the
lights will switch o ).
- To turn the kettle o before the water boils, you may
move the ON/OFF switch up to the OFF position,
or simply lift the kettle from its base it will switch
o and the switch will return to the OFF position
automatically.
Pouring
- Remove the kettle from the power base and carefully
pour out the water. Do not tilt the kettle suddenly or
pour water out at too sharp an angle.
- When you lift the kettle from the base, you may see
moisture on the top surface of the base. Condensation
on the base is perfectly normal, and should not be a
cause for alarm.
Please note: Empty the kettle after each use. Rinse
the kettle with fresh water if you have not used for more
than two days. To reduce energy consumption and waste of
water, use only the amount of water you need.
SAFETY DEVICES
1) Automatic ON/OFF switch:
Your kettle is tted with an ON/OFF switch which
automatically switches o once the water has boiled.
If the kettle has just boiled, wait a minute or so before
re-boiling the kettle. Do not attempt to hold the ON/
OFF switch in the on position or adjust the switch
mechanism.
2) Safety cut-out:
If the kettle is switched ON with too little or no
water, it is protected against damage by a safety cut-
out which will switch o the power. If this cut-out
operates, disconnect the kettle from the mains supply
and leave to cool down before relling with cold water
(otherwise the element could be damaged).
3) If kettle is lifted from base while operating (ON), it will
automatically switch o.
MAINTENANCE
Cleaning the kettle
- Allow the kettle to cool down fully and disconnect the
appliance from the mains before cleaning.
- Do not immerse the kettle or base in water.
- To maintain the precious nish of the appliance, we
recommend cleaning the outside of the appliance
with a damp cloth and water only.
- DO NOT use metal polish, ammable liquids or harsh
scouring agents.
- Ensure that all connectors and sockets are kept dry.
Scale
When the water is heated, the minerals in the water solidify,
making the water appear cloudy. As soon as you notice a
lm forming on the water, or, when cleaning the lter, if
you notice a lm on the walls or the element, descale the
kettle and its lter.
Scale lter
Your kettle is tted with a scale lter to prevent loose
particles of scale being poured into your beverage. This lter
is both removable and washable. You should remove and
clean the water lter when you notice any deposits being
left on the lter or if the pouring eciency is impaired.
Removing the scale lter
- Allow the kettle to cool down fully and disconnect the
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi KBOT2001 - Icona at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi KBOT2001 - Icona in the language / languages: English as an attachment in your email.

The manual is 0.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi KBOT2001 - Icona

DeLonghi KBOT2001 - Icona User Manual - German - 4 pages

DeLonghi KBOT2001 - Icona User Manual - Dutch - 4 pages

DeLonghi KBOT2001 - Icona User Manual - French - 4 pages

DeLonghi KBOT2001 - Icona Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info