5
notches towards the centre. In this case, to turn the appliance off totally the plug must be
pulled out apart from switching off, so as to avoid unnecessary working of the timer.
MODELS WITH MOTORISED ROTATING BASE
Some models feature an adjustable motorised base and foot/pedal switch.
To distribute the air flow over a larger area, press the pedal. When activated in this way, the
appliance will oscillate. To stop the appliance in the desired position, simply press the pedal
again.
MAINTENANCE
- Always remove the plug out of its socket point before cleaning the heater.
- Periodically clean the air intake and outlet grilles.
- Do not use abrasive cleaning products or solvents.
CAUTION
- Do not make use of this heater in the immediate proximity of showers, bathrubs, swim-
ming pools, etc.
- Always use the heater in an upright position.
- Do not cover the appliance when in operation as this could cause a fire risk.
- Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles
(danger of overheating).
- The heater must positioned at least 50 cm from furniture, walls, curtains, or other objects.
- When the appliance is used as a portable heater, do not place it close to walls, furniture,
curtains etc.
- The use of extension leads is not reccomended, however if it is necessary then follow care-
fully the extension lead’s instructions, and most importantly ensure that the extension lead
is correctly rated in accordance with the heater being used and NEVER overloaded.
- If the power cable is damaged, it must be replaced by the manufacturer, an authorised servi-
ce centre or a qualified electrician in order to eliminate all risk.
- Do not use the appliance in rooms less than 4 m
2
in area.
The appliance is fitted with a tilt-switch which turns the appliance off if it should fall over. To
restart the appliance, simply place it upright again.
The heater is fitted with a safety device which will switch the heater off in case of acci-
dental overheating (eg. obstruction of air intake and outlet grilles, motor turning slowly or
not at all). To reset, disconnect the plug from the power socket for a few minutes, remove the
cause of overheating then plug the appliance in again.
Important: never cover this appliance in any manner whatsoever while it is
operating. To do so would cause a dangerous increase in the temperature of
the appliance itself.