4
off
If Maximum power has been selected, adjust the thermostat dial (Fig. 1) to the desi-
red comfort temperature, from 5°C to 35°C. By turning the thermostat dial the
display will show the selected temperature.
In addition, the numbers on the right-hand side of the display will indicate the actual
room temperature as below.
This heater has Electronic Climate Control which automatically monitors and selects
the ideal power setting to maintain your chosen temperature.
If the selected temperature is higher than the actual room temperature, the applian-
ce will start automatically and rapidly heat the room until it reaches the selected tem-
perature. The unit will automatically maintain the temperature at a constant level, by
switching between maximum, medium and minimum power.
If the room temperature exceeds the selected temperature level, the appliance will
switch off.
Note: The display will always show the power setting you have chosen, not the
one it is currently working at.
The appliance will switch on automatically again when the room temperature falls
below the selected temperature level.
If medium power level has been selected using the “MANUAL FUNCTION” but-
ton, the appliance will modulate between medium and minimum power to maintain
a selected temperature.
FROST STAT FUNCTION
Press the “MANUAL FUNCTION” button (it is recommended to select the maxi-
mum power level).