Manual DeLonghi FRIO12 (page 32 of 109) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

465783

Zoom out

Zoom in

1/109

Lagging

Covered by

vinyl tape

Lagging the pipes

Place the drain hose (not provided in the kit) below the

piping, taking care not to create siphons.

Use polythene foam with thickness exceeding 6 mm

to insulate the connections.

The drain hose must slant downwards to aid drainage.

Do not bend the drain hose or leave it protruding

or twisted and do not put the end of it in water. If an

extension is connected to the drain hose, ensure that

it is lagged when it passes into the indoor unit.

If the piping is installed to the right, the pipes, power

cable and drain hose must be lagged and secured

onto the rear of the unit with a pipe connection.

1. Insert the pipe connection into the relative slot.

2. Press to join the pipe connection to the base.

Connecting the pipes

Use two wrenches to tighten the indoor unit pipe joints.

Pay particular attention to the torque recommended

below in order not to risk deforming and damaging

flared pipes, connectors and nuts.

Tighten the connections using two wrenches working

in opposite directions (see technical data table).

Attach at

this point

After having connected the pipe according to the instruc-

tions, install the drain hose. Now install the power cables.

After connection, lag the pipe, cables and drain hose with

the insulating material.

Lag the pipe joints with insulating material, securing it

with vinyl tape.

Cover the through holes in the wall with elastic mate-

rial that is also noise absorbing if possible.

Upon completion of installation, check that the con-

densate flows out regularly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi FRIO12 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 8,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi FRIO12 Manual

Product: