723485
13
Zoom out
Zoom in
Previous page
1/26
Next page
11
that the hot water spout is inserted on the
nozzle and place a container with a minimum
capacity of 100 ml underneath (fig. 4).
Press the OK icon (fig. 2).
“Please wait.” is displayed and the appliance
begins to deliver water from the hot water
spout. This is priming the water system. (It
is normal for the machine to make some
noise).
The appliance ends the first start up procedure,
then the message “Turning off, Please wait” is
displayed and the appliance goes off.
The coffee maker is now ready for normal use.
Please note:
7iÊÕÃ}ÊÌiÊ>««>ViÊvÀÊÌiÊwÀÃÌÊÌi]Ê
you need to make 4/5 cups of coffee or 4/5
cappuccinos before the appliance starts to
give satisfactory results.
TURNING THE APPLIANCE ON
Please note:
Before turning the appliance on, make sure the
main switch on the back of the appliance is in the
I position (fig. 1).
After setting up the appliance, each time the
appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be
interrupted.
The appliance is ready for use only after
completion of this cycle.
Danger of burns!
During rinsing, a little hot water is delivered from
the coffee spouts and collected in the drip tray
underneath.
Avoid contact with splashes of water.
To turn the appliance on, press the
button (fig. 5). The message “Heating up,
Please wait...” is displayed.
After heating, the message “Rinsing...” is
displayed. As well as heating the boiler, the
appliance also heats the internal circuits by
circulating hot water.
The appliance is at temperature when the
message “STANDARD COFFEE” “Standard taste”
is displayed.
TURNING THE APPLIANCE OFF
Each time the appliance is turned off, it performs
an automatic rinse cycle which cannot be
interrupted.
Important!
To avoid damaging the appliance, always press
the
button (fig. 5) to turn off.
Danger of burns!
During rinsing, a little hot water is delivered from
the coffee spouts.
Avoid contact with splashes of water.
/Ê ÌÕÀÊ ÌiÊ >««>ViÊ vv]Ê «ÀiÃÃÊ Ìi
button (fig. 5). The appliance performs the
rinse cycle then goes off.
Please note:
If the appliance is not used for an extended
period, place the main switch in the 0 position
(fig. 6).
Never place the main switch in the 0 position
while the appliance is on.
MENU SETTINGS
When you access the programming menu by pressing
the P button, the following menu items are available:
Descale, Set language, Energy Saving, Adjust time,
Auto-start, Auto-off, Coffee temperature, Water
hardness, Beep, Statistics, Default values.
Descaling
For instructions on descaling, see page 21.
Setting the language
To modify the language on the display, proceed
as follows:
1. Press the P icon to enter the programming
menu;
2. Press the
or : icon until “Set language”
is displayed;
3. Press the OK icon;
4. Press the
or icon until the required
language is displayed;
5. Press the OK icon to confirm;
6. Press the ESC icon to exit the menu.
Energy Saving
Use this function to enable or disable energy
saving mode. When enabled, the function
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Esam 6720 - Primadonna Avant at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Esam 6720 - Primadonna Avant in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Esam 6720 - Primadonna Avant

DeLonghi Esam 6720 - Primadonna Avant User Manual - German - 20 pages

DeLonghi Esam 6720 - Primadonna Avant User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info