562616
13
Zoom out
Zoom in
Previous page
1/17
Next page
19
Perno
Supporto
spout. The descale programme automatically
performs a series of rinses and pauses to
remove limescale deposits from inside the
machine.
After about 30 minutes, the message “RINSING...
FILL TANK!” is displayed.
9. The appliance is now ready for rinsing with
clean water.
Remove the water tank, empty, rinse
under running water, fill with clean water
and replace. “RINSING... PRESS OK” is
displayed.
10. Empty the container used to collect the
descaler solution and replace it under the hot
water spout.
11. Press the OK button to start rinsing. Hot
water flows out of the spout and the message
“RINSING...” is displayed.
12. When the water tank is completely empty,
the message “RINSING COMPLETE... PRESS
OK” is displayed.
13. Press the OK button, fill the water tank and
the appliance is ready for use.
SETTING WATER HARDNESS
The DESCALE message is displayed after a
period of time established according to water
hardness.
The machine is factory set for a hardness value
of 4. The machine can also be programmed
according to the hardness of the mains water in
the various regions, varying the frequency with
which the message is displayed.
Measuring water hardness
1. Remove the “TOTAL HARDNESS TEST”
indicator paper from its pack.
2. Immerse the paper completely in a glass of
water for one second.
3. After about a minute, 1, 2, 3, or 4 red squares
form, depending on the hardness of the water.
Each square corresponds to one level.
Level 1
Level 2
Level 3
Level 4
Set water hardness
1. Press the P button to enter the menu.
2. Press the button (corresponding to
the symbol flashing on the display)
repeatedly until the menu arrow is on
“WATER HARDNESS”.
3. Confirm the selection by pressing the OK
button.
4. Press the button (corresponding to the
SET symbol flashing on the display) until the
number displayed coincides with the number
of red squares on the test strip.
5. Press the OK button to confirm the setting.
6. Press the P button (corresponding to the
ESC symbol flashing on the display) to exit
programming mode or to change other
parameters.
The machine is now reprogrammed with the new
water hardness setting.
SETTING THE LANGUAGE
To change the language on the display, proceed
as follows:
• PresstheOK button for at least 5 seconds
until the appliance displays the installation
message in various languages.
• Whenthelanguagerequiredappears,press
OK for 3 seconds.
TECHNICAL SPECIFICATION
Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power: 1350W
Pressure: 15 bars
Water tank capacity: 1,8 litres
Size LxHxD: 282x374x441 mm
Weight: 11,4 Kg
The appliance complies with the following EC
directives:
• “Low voltage Directive” 2006/95/CE and
suc¬cessive amendments.
• “EMC Directive” EMC 2004/108/CE and
successive amendments.
• The materials and objects destined to
come into contact with food stuffs are
in compliance with the provisions of the
1935/2004 European Standard.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ESAM 6650 PRIMADONNA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ESAM 6650 PRIMADONNA in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ESAM 6650 PRIMADONNA

DeLonghi ESAM 6650 PRIMADONNA User Manual - German - 23 pages

DeLonghi ESAM 6650 PRIMADONNA User Manual - Dutch - 15 pages

DeLonghi ESAM 6650 PRIMADONNA User Manual - French - 15 pages

DeLonghi ESAM 6650 PRIMADONNA Quick start guide - All languages - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info