362439
22
Zoom out
Zoom in
Previous page
1/27
Next page
21
mic or acetic based descalers. Their use invalida-
tes the guarantee. Failure to descale the applian-
ce as described also invalidates the guarantee.
1. Turn the machine on.
2. Choose the “MAINTENANCE” section as de-
scribed in the section “Menu settings”.
3. Press the selection icons until “Descale” is
displayed.
4. Press the icon to confirm. “OK to con-
firm” is displayed. Press the icon again to
enable the function.
5. The message “Add descaler Press OK” is di-
splayed.
6. Before confirming, empty the water tank
(A7).
Pour the descaler diluted with water (respec-
ting the proportions indicated on the desca-
ler pack) into the water tank and replace it in
the appliance.
Place an empty container with a minimum
capacity of 1.5 litres under the hot water
spout.
Important! Danger of burns
Hot water containing acid flows out of the hot
water spout.
Avoid contact with splashes of water.
7. Press the selection icon corresponding to OK
to start the descaling programme.
8. The message “Descaling...” is displayed.
The descaling programme starts and the de-
scaler liquid comes out of the water spout.
The descale programme automatically per-
forms a series of rinses and pauses to remo-
ve limescale deposits from inside the machi-
ne.
After about 30 minutes, the message “Rinsing
FILL TANK!” is displayed.
9. The appliance is now ready for rinsing throu-
gh with clean water.
Remove the water tank, empty, rinse under
running water, fill with clean water and repla-
ce. “Rinsing... Press OK” is displayed.
10. Empty the container used to collect the de-
scaler solution and replace it under the hot
water spout.
11. Press the selection icon corresponding to OK
to start rinsing. Hot water flows out of the
spout and the message “Rinsing...” is displa-
yed.
12. When the water tank is completely empty,
the message “Rinsing Complete... Press OK”
is displayed.
13. Press the selection icon corresponding to
OK. The appliance goes off.
To use it again, turn the appliance on by pressing
the button.
SETTING WATER HARDNESS
The DESCALE message is displayed after a
period of time established according to water
hardness.
The machine is set by default for a hardness va-
lue of 4.
The machine can also be programmed accor-
ding to the actual hardness of the mains water in
the various regions, varying the frequency with
which the message is displayed.
Measuring water hardness
1. Remove the “TOTAL HARDNESS TEST” indi-
cator paper from its pack.
2. Immerse the paper completely in a glass of
water for one second.
3. Remove the paper from the water and shake
lightly. After about a minute, 1, 2, 3, or 4 red
squares form, depending on the hardness of
the water. Each square corresponds to one
level.
soft water
mmml
slightly hard water
mmll
hard water
mlll
very hard water
llll
Set water hardness
1. Choose the “SETTINGS” section as descri-
bed in the section “Menu settings”.
2. Press the selection icons until “Water
Hardness” is displayed.
3. Press the icon to confirm.
4. Press the selection icons to set the level cor-
responding to the water hardness identified
by the indicator paper (see figure in previous
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi esam 5600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi esam 5600 in the language / languages: English as an attachment in your email.

The manual is 6,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi esam 5600

DeLonghi esam 5600 User Manual - German - 28 pages

DeLonghi esam 5600 User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info